Need Help?
Call or text
Show parts
This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Normally screws are found in many different types of appliances. These parts are important in holding different pieces together so that the user is able to operate the machine effectively. A new screw might be needed if some parts of the appliance are loose or missing from place.Screws can become stripped over time with normal equipment use. If this is the case it is recommended that they be replaced. The repair for this screw is simple and will most likely require common household tools as well as pliers. This screw is made of durable metal made for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.
Usually ships within 4 - 14 days
Combustion engines are quite loud by nature, and their sound and emissions are toned down through the use of a muffler system. In small engines, the muffler often attaches directly to the cylinder to capture the gases and reduce noise. Should that connection weaken or loosen, a replacement bolt may need to be installed to ensure a tight seal and optimal engine performance. This replacement muffler bolt is meant to be installed on edgers, blowers, trimmers and pruners from brands like Poulan, Jonesred, Weed Eater and Husqvarna. This is an OEM replacement part and is going to be responsible for fastening the machine's muffler to the cylinder. It will require the proper hex key to install properly and is considered an easy repair frequently required on many small machines.
This genuine muffler is designed to offer a replacement for select lawn and garden equipment engines. The muffler is part of the exhaust system and it is responsible for reducing the noise from the engine as it exhausts out of the unit. Over time, mufflers are known to get clogged, rust, or otherwise wear out and require replacement. If the muffler becomes clogged or damaged, it will need to be replaced in order to operate the equipment safely. This is a genuine OEM replacement muffler that is manufactured to specific standards. It is made by Weed Eater and is compatible with several of their machines, as well as units from Husqvarna and Poulan. The muffler is sold as an individual unit and does not include the hardware required for installation. It is used in select trimmers, pole pruners, edgers, and lawnmowers. To replace the muffler, it will be important to wear gloves and allow the engine to cool completely. Remove the old muffler and replace it with the new unit, securing it into place with the existing hardware. In the event that the hardware also needs to be replaced, it can be purchased separately.
Craftsman manufactures this cylinder head bolt that fastens the cylinder of a small gasoline-powered engine to the engine manifold. There are often two head bolts that secure the cylinder. The placement of the bolts is important as it not only fastens the two engine parts together, but holds the cylinder gasket in place, as well. Among the equipment that uses this type of cylinder head bolt are leaf blowers, power vacuums, grass trimmers, edgers, and hedge trimmers. While it is rare for the bolts to fail, the gasket they hold in place can sometimes wear and allow oil to leak outside the engine manifold or into the combustion chamber. This is revealed by white, oily smoke or an abundance of oil on the equipment. When replacing the head gasket, it is a good idea to replace the cylinder head bolts, as well, as they will have received a good deal of wear, potentially weakening them. These bolts are sold separately, so the user should make sure to purchase the correct number of bolts needed. Before beginning, the user should consult diagrams of the internal engine parts and their order. These bolts are OEM genuine replacement parts, built to match the factory originals.
This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.
This is a genuine engine cylinder that is designed for use in select outdoor power equipment. The cylinder is the part of the engine that houses the spark plug and piston, creating the combustion chamber that the engine needs to ignite the air-fuel mixture that runs the engine. The cylinder is exposed to high heat, excessive pressure, and chemicals that can all cause wear and breakage over time. In the event that the cylinder goes bad, it needs to be replaced immediately to prevent further engine damage. This OEM cylinder is manufactured by Husqvarna. It can be used in trimmers, blowers, edgers, and pruners from the brand, as well as from Poulan and Weed Eater. The cylinder is sold as an individual unit and does not include hardware or other parts or accessories. Replacing the cylinder takes a little more effort because it requires disassembling the engine. To replace the cylinder, remove the engine shrouds, and then remove the engine from its mount. From here, the cylinder can be removed from the block and the piston can be taken out. Then, the new cylinder can have the piston installed before being bolted into place. The accessories can be replaced and then the engine can be re-mounted.
A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.
This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.
Here is a replacement piston kit for use with handheld lawn and garden equipment engines. The pistons in an engine are essential to transfer combustion power to the various working parts of the machine. Pistons might need to be replaced if they have suffered any sort of damage or corrosion. There are several parts to the system including the piston, rings, wristpin, and circlips. The damage or wear and tear could occur in any of these different parts. When replacing a piston, it is a good idea to replace all of the parts of the kit, not just the part that is having issues. This authentic OEM piston kit is compatible with string trimmers, leaf blowers, hedge trimmers, pole pruners, and edgers. It is sold individually and is compatible with Husqvarna, Craftsman, Poulan, Poulan Pro, and Weed Eater brands. Owners buying a piston kit need to be sure they are getting the right part for their make and model.
This carburetor adapter attaches to the gasket on some kinds of lawn equipment with small engines. It is made of a durable plastic material, but wear and tear or impact can cause the part to become damaged. If the part is damaged or broken, the carburetor adapter will need to be replaced with a new component.A visual inspection can determine whether the carburetor adapter should be replaced. The fuel lines and throttle linkage will first need to be removed. Next, the bolts on the carburetor should be taken out so the carburetor can be removed. Take the bolts out of the carburetor plate and remove it. This will give access to the carburetor adapter so it can be determined whether it needs to be replaced. Simply install the new part before reassembling the machine so it can be used again.This replacement carburetor adapter is designed for use with string trimmers and pole pruners manufactured by Craftsman, Poulan, Poulan Pro, and Weed Eater. It is a genuine OEM part that is directly sourced from the manufacturer. This part is sold as an individual component.
The carburetor takes in air and fuel from the engine and mix them together, sending them through a butterfly valve into the engine. Though the carburetor has filters in place, it can still become clogged or damaged over time. It may just wear out and stop working. Assess the carburetor by putting fuel directly into the carburetor and starting the engine. If the engine dies as soon as it starts, it's likely the carburetor needs to be replaced. This carburetor assembly manufactured by Poulan for use in select lawn and garden equipment engines can provide the ideal replacement part. Be sure to disconnect the spark plug before beginning any engine work and always wear gloves. Drain the fuel system when replacing this part for safety and ease of repair. This OEM replacement can be used in Weed Eater and Poulan gas trimmers with compatible model numbers. It will work with about a dozen trimmers and pruners from these two brands. This part is sold individually as a full assembly, including the primer bulb.
The base air box is made from plastic and is used for several types of lawn and garden equipment. The air box is the housing for the machine's air filter and allows the air to flow into the carburetor. The air then mixes with the fuel that is sent to the cylinder.If there is a problem with the air box, it will not provide a proper and secure housing for the air filter. The air will not flow into the carburetor properly. This could result in problems with the machine starting, causing overheating or poor performance. The base air box is durable, but there is a chance it could become damaged and break or wear down over time. Owners will want to replace the air box if they notice any issues.The base air box works with many models of pruners and trimmers from Poulan, Husqvarna, and McCulloch. It is a genuine OEM replacement part that has been sourced from the manufacturer. The air box is sold individually.
Screws are responsible for holding together various lawn and garden engine components and housing parts. Although it is made of durable metal, the screw can be subject to damage from an incident or impact. It could also become worn or stripped over time, or even lost in the process of other repairs. As a result, a replacement would be necessary, and it should be made as soon as possible. This screw will provide the perfect fit for compatible machines. This genuine OEM replacement screw is manufactured by Husqvarna to exact standards. It can be found in applications on more than 150 machines from Poulan, Husqvarna, Weed Eater, and Jonsered. The screw is used on multiple machines, including hedge trimmers, pruners, blowers, and trimmers. Be sure to check the parts diagram for exact application and location of this screw. The screw is sold individually as a single unit and those who need more than one will have to purchase additional quantities. This screw is made of premium metal and requires a Phillips head screwdriver for replacement.
An air filter contributes to engine and carburetor performance by keeping dirt and dust out. Eventually, it will accumulate too much debris and get clogged. When this happens, tiny particles can enter, damage internal parts, and cause flooding, rough idling, and sputtering. Installing a brand-new air filter foam is easy and requires no tools. Start by opening the air filter cover. Then, take the dirty filter out. Take the new filter and put it inside a plastic bag before pouring a small amount of oil into the bag. Make sure to coat it evenly. Then, take the new filter out, put it on the rag, and remove the excess oil. Put the oiled foam air filter to the housing and close the air filter door. This air filter replacement is a 100% genuine Husqvarna product. It is directly sourced from the Husqvarna. It works with string trimmers, pole pruners, and leaf blowers from Paramount, Weed Eater, Husqvarna, Craftsman, Poulan, and Turf King. This air filter replacement is made from foam and comes unoiled. This fuel tank replacement is sold individually. Other fuel tank parts are not included.
This air box cover is made to fit over the air filter on a string trimmer or pole pruner. It's a durable component made of hard plastic that fully covers the air filter to prevent dirt and debris from reaching the internal parts. It also offers some protection to the carburetor. After extensive use, the air box cover can become damaged. This can occur due to regular wear and tear or from being knocked against other items during use. If the box is cracked or broken, it will need to be replaced.Check the surface of the air box cover for gouges, scratches, and holes. The cover also may come loose after time. If these things are occurring, the air box cover will need to be replaced. If the part is damaged, it can be removed without using any tools. Snap off the current cover and the replacement part will snap on in its place. This air box cover is a genuine OEM replacement component that is directly sourced from the manufacturer. It comes as an individual item. The part is compatible with Craftsman, Poulan, and Poulan Pro pole pruners and string trimmers.
An ignition module works in conjunction with the flywheel to create an electric current. It sends the voltage to the spark plug at a precise time to ignite the fuel and air mixture in the cylinder. An ignition module does not have moving components, but exposure to heat can cause damage over time. There are several warning signs that the ignition module has failed. The most common ignition module related problem is engine sputtering. If the damage is severe, it may cause total engine start failure. This is an original Husqvarna ignition module replacement. This part is compatible with string trimmers, pole pruners, hedge trimmers, and leaf blowers from Craftsman, Poulan Pro, Weed Eater, and Poulan. It is sold individually. Other components are not included in this ignition module replacement.
These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.
This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.
This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.
The rope kit is for use with handheld trimmers and pruners. The replacement rope is one of the most important items in the recoil starter mechanism. The rope on these machines needs to be pulled to engage the cylinders and start the engine.The rope could become damaged through regular use or an accident. If the rope is frayed, owners should replace it as soon as possible. The fraying will continue and it will eventually break. This could be dangerous, and it would mean the machine is not usable until the rope is replaced.The durable nylon rope will work with certain models of handheld trimmers and pruners from Husqvarna, Poulan, and McCulloch. The rope is sold individually, and it should be noted that it only comes with the rope. The grip is sold separately. The grip from the old rope may still be serviceable. If not, the owner will want to buy a grip at the same time as the rope to replace everything at once. This is a genuine OEM replacement part from the manufacturer.
The clutch assembly is located in the clutch drum and connected to the drive shaft of the motor. This part is what allows the engine to idle without actually driving the cutter on lawn and garden equipment. The clutch is constantly engaged, so it can wear out over time and eventually need to be replaced. It may also become damaged in a direct impact or incident. If the clutch assembly fails, this could impact the ability of the engine to idle properly or even to remain running once it's started. This replacement part can offer an exact fit for compatible engines. This OEM clutch assembly is manufactured to high standards by Poulan and is designed to be compatible with various machines from Poulan, Weed Eater, Jonsered, and Husqvarna. The clutch assembly is a replacement part for various trimmers and pruners from the brands listed above. Replacing the clutch will require a wrench, screwdriver, pliers, and socket set. Be sure to cool the engine completely and wear gloves when doing repairs on lawn and garden equipment for safety.
This is a housing fan assembly used to cover the flywheel fan and clutch, protecting them from outside elements. It keeps dirt and debris from reaching the flywheel fan and clutch. A visual inspection for cracks, breaks or corrosion is all that is needed to determine if this part should be replaced.Replacing a housing fan assembly kit is a simple repair. Make sure to allow the machine to cool thoroughly before beginning. Wear gloves for protection.This housing fan assembly kit is an authentic OEM part. It is sold as an individual unit. This piece is made of high-quality, durable materials. It is compatible with Poulan and Husqvarna brand lawn and garden equipment. It can successfully be installed in various trimmers and pruners, including over 25 different models.
This recoil starter spring is what retracts the rope back into the main starter assembly. When the rope is pulled, the spring expands. The release of the rope triggers a retraction, which pulls the rope in and activates the starter, creating the chain reaction that starts the engine. This spring can get twisted or become hyperextended with regular use, in which case the only solution would be to replace the entire spring assembly. This OEM recoil starter spring is manufactured by Husqvarna, with high-quality standards in mind. It is compatible with Poulan, Weed Eater, and Husqvarna machines, including trimmers, leaf blowers, edgers, and pruners. Owners should always consult their parts diagram or owner’s manual for exact part number compatibility. This durable metal spring is designed from high-quality materials and is sold individually. The starter rope and other parts of the assembly are sold separately. Always disconnect the spark plug and wear gloves when performing engine work.
This is a recoil starter pulley kit that can be used as a replacement for many different models of handheld trimmers and similar outdoor power equipment. The starter pulley is an important part of the starter mechanism in the engine. When the user pulls the rope to start the engine, the pulley will engage the flywheel, which will then allow the engine to start running. Owners might find that they need to replace the recoil starter pulley at some point. Over time and with a lot of use, this part can begin to wear down. Elements of it could break or wear away. If this happens, it will be difficult to get the engine started because the pulley will not properly engage the flywheels. Sometimes, it might be impossible to get the engine started at all. The owner will then need to replace the recoil starter pulley. This is a genuine OEM replacement part that is sold individually. The pulley can work with many models of pole pruner, string trimmer, and leaf blower. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro.
This fan baffle is a genuine Husqvarna part, sold individually. This fan baffle can be used as a replacement part in a string trimmer or a pole pruner. The fan baffle in a string trimmer or a pole pruner might have to be completely replaced if the fan baffle can no longer serve its typical function. This could occur if the fan baffle suffers damage for which a repair cannot be conducted. If this occurs, the fan baffle should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual or handbook. It is a simple replacement process that will only require simple tools to conduct. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fan baffle is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.
This flywheel assembly is for use with trimmers and pruners. This part is located on the crankshaft on the outside of the case, and it creates a spark from the magnets on its sides. Flywheels can become damaged or worn with use over time and should be replaced if they are no longer functioning as they should.Check for knocking, rattling or other chirping noises when the flywheel is engaged; these are signs that it is failing. Eventually, once this part has failed completely, the garden tool will no longer function at all. Replacing a flywheel assembly is a simple task with the appropriate tools. Wear gloves for protection while making the repair. Be sure the device is entirely cooled before attempting to work on it.This flywheel assembly is an authentic OEM replacement part. It is made from high-quality, solid, metal materials. The flywheel assembly is sold as an individual unit. The replacement part is sourced directly from the manufacturer. It can be installed in both Husqvarna and Poulan brand lawn equipment. It is used in over 25 different models of trimmers and pruners.
This replacement part is a retaining ring. This is a genuine replacement part made by Husqvarna. This part acts as a fastener and is used to hold certain components together. This ensures that the machine is working efficiently during use. A new retaining ring might be needed if the current one is visibly damaged or is no longer able to stay attached to the machine. If the ring has become stripped over time, it might be best to replace it so that the appliance can return to working order. This should be a simple repair and only require common household tools such as screwdrivers or pliers. Refer to the owner's manual for more information on how to repair this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
This is a genuine outer bearing replacement for use on select models of outdoor lawn and garden equipment. The outer bearing is installed on the crankshaft and helps create a flexible joint for the various components to move against. This bearing is made of durable metal material, but over time it can become worn and damaged. It may also come loose or get lost in the process of other repairs. In any case, a faulty bearing will need an immediate and original replacement. Wear gloves and allow the engine to cool completely before beginning any repairs. Be sure to take the crankshaft components apart carefully to access the bearing so that they can be reassembled properly. Bearings should also be lubricated when installed.This is an OEM part that is manufactured to exact standards. It is made by Craftsman and can be used in machines from Weed Eater, Poulan, and Craftsman. This bearing can be used in compatible blowers, edgers, trimmers, pruners, and hedge trimmers. It is sold as an individual unit and there is no additional hardware included.
A crankcase seal is what prevents the oil from leaking between the crankcase opening and the crankshaft. It is often found on the engine's front or underside and seals the timing cover to the crankshaft. Oil seals may become damaged or worn with use. Bearing seizures and grinding indicate that the crankcase seal should be replaced. If there is oil leaking from the crankcase or on the crankshaft, a replacement crankcase seal is necessary.Wear gloves and be sure to collect all the tools needed prior to starting a replacement. Replacing a crankcase seal requires Torx wrenches, a container for fuel, spark plug socket or wrench, adjustable or 10-millimeter wrench, rubber mallet, long-nosed pliers, screwdriver, adjustable pliers, socket set, starter rope, 2-cycle engine oil, ignition gapping gauge, and a razor blade. Follow the operator manual for specific directions.The crankcase seal is a genuine OEM part. It is sold individually. The crankcase seal is black, round, and made from durable, high-quality plastic and metal for extensive use. It can be used in a variety of lawn equipment, including leaf blowers, trimmers, hedge trimmers, and vacuums. It is compatible with various manufacturers, including Craftsman, Husqvarna, Weed Eater, RedMax, and Poulan Pro.
This bearing is a genuine Husqvarna part, sold individually. A bearing can be used as a replacement part for outdoor appliances including string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners. The purpose of this genuine OEM part is to facilitate the rotation of one or more components within one of these outdoor appliances.If the bearing has been punctured, dented, cracked, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bearing is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Paramount, and Turf King.
This replacement piston kit is designed to be used with many different types of handheld lawn and garden equipment. The pistons are important parts of the engine. The crankshaft powers the pistons, so they move up and down within the cylinder. The purpose of the pistons is to transfer the gas that expands within the cylinder. The pistons can begin to wear out over time, which means that they could fail, which will cause serious problems for engine performance. If there are issues with the piston, a replacement piston kit is essential to get the machine back up and running. When a piston goes bad, it will cause the engine power to decrease. In some cases, the engine might lose all power. Replacement will require pliers, a set of wrenches, and a screwdriver to complete. This high-quality piston kit replacement is a genuine OEM part. It is sold individually. The part can be used for pole pruners, edgers, leaf blowers, string trimmers, and hedge trimmers. Compatible brands include Weed Eater, Poulan, Poulan Pro, Husqvarna, and Craftsman.
This is a connecting rod assembly used in many types of lawn and garden equipment. It is made of durable metal and connects the engine crankshaft to the piston. The connection rod assembly is also tasked with transferring power to the crankshaft from the piston. This is an important component that is required for the proper functioning of an internal combustion engine.If the connecting rod assembly has gone bad, it can cause knocking sounds from the engine, low oil flow and pressure, and excessive oil consumption. In some cases, a broken connecting rod assembly will also result in an overheating engine. If the connecting rod assembly has gone bad, a wrench and screwdriver will be needed to replace it. Make sure to wear work gloves, disconnect the spark plug wire, and let the engine cool before working on the part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The connecting rod assembly is designed for use with string trimmers, hedge trimmers, leaf blowers, edgers, and pole prunes manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.
This is an OEM replacement screw that is specifically designed to secure the fuel tank on select lawn and garden equipment. The fuel tank retainer screw is made of durable metal and will be screwed to the fuel tank and the body of the machine, holding the tank in place and preventing it from being exposed to excessive vibrations or potential spillage. These screws can become worn over time or be lost in the process of other repairs. This genuine OEM fuel tank retainer screw is compatible with hundreds of trimmers, blowers, edgers, and pruners. It can be used with select models of machines from Poulan, Husqvarna, Weed Eater, and Jonsered. Owners should check their parts diagram for exact placement and part number compatibility as fuel tank retainer screws come in different lengths and diameters, so they are model-specific. This screw is made of durable metal and will require a Torx driver to install. The fuel tank retainer screw includes a built-in washer and is sold as an individual unit. Those who need more than one will have to purchase multiple quantities.
This part is discontinued by the manufacturer and is no longer available for purchase.
The fuel system on a trimmer is contained within the fuel tank assembly and will include the fuel lines, fuel cap, and the fuel filter. It is a typical and essential system on any gas-powered trimmer. Although it might seem that a fuel system is a universal thing, there are specific styles that work with specific models. Though they are crafted of durable materials, with time and the vibrations, heat, and wear and tear put on them, they can require replacement. They can also be damaged by dropping or striking the trimmer and necessitate a replacement. It will require a star or Torx screwdriver for the replacement process. The damaged assembly will have to be removed, and any seals or lines checked for damage or leaks, and then the new assembly can be installed easily. This authentic OEM fuel tank assembly is designed to include the fuel tank, a cap, and the fuel line. It is made of durable and long-lasting materials and will offer a long period of reliable performance when installed properly. This fuel tank assembly works on string trimmers as well as pole pruners made by Craftsman, Poulan, Poulan Pro, and Weed Eater, as well as Husqvarna.
This is a 25-inch long fuel line for use with various outdoor power tools and equipment that include small engines. Known as a fuel hose, fuel tube, or pick-up tube, the fuel line delivers fuel from the tank to the carburetor. It is made of flexible translucent plastic to prevent splitting and kinking. Over time, the fuel line can become brittle, cracked, or clogged. When a crack or clog develops, fuel can leak out and make it difficult to start the engine. A leak can cause damage to the motor and the equipment, create performance issues, and even become a safety hazard because of the flammability of the fuel. Replacing a worn-out or cracked fuel line is easy and takes 30 to 60 minutes to complete. Disconnect the old fuel line from the carburetor and the fuel grommet, then replace it with the new line. This replacement part works with different outdoor power tools like the chainsaw, edger, hedge trimmer, leaf blower/vacuum, pole pruner, and pole saw. It is compatible with popular brands like Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater. It is an OEM replacement part sourced directly from the manufacturer and is sold individually.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
This gasket replacement kit is for use with several types of handheld lawn and garden tools to help ensure there are no leaks of air or oil in the engine. They are an important part of the engine and help it continue to run efficiently. Over time, the gaskets will start to wear down. They might become brittle and start to crack. In some cases, they may no longer sit properly and could allow for leaks. If an owner notices an engine running roughly or leaking oil, the problem could be with the gaskets. They will need to be replaced. This replacement gasket kit is a genuine OEM selection. It includes the major gaskets and O-rings that need to be replaced when the owner is rebuilding an engine. These gaskets will work with trimmers and pole pruners. The compatible brands include Craftsman, Weed Eater, Poulan, Poulan Pro, and Husqvarna. Buyers should always double-check to ensure the gasket kit is compatible with their make and model.
The clutch drum assembly seen here from Husqvarna is an important part of machines such as trimmers and pruners. The purpose of the clutch drum is to engage the clutch to spin the flex shaft and the cutting head. The clutch drum assembly could need to be replaced for many reasons. One of the most common signs is when the trimmer head stops spinning when it encounters weeds, grass, etc. Other signs include having a drive shaft that will not engage or a clutch that won't engage the drum. Sometimes, the lining in the clutch drum could become stripped, so there will be no torque when it is used. Replacing the clutch drum assembly can be a complicated task and will require a range of tools. Owners will also need to empty the fuel from the machine before they replace the clutch drum. This authentic clutch drum assembly is an OEM part from Husqvarna. It is sold individually and works for certain models of string trimmer and pole pruner. Brands that are compatible in addition to models from Husqvarna include Craftsman, Weed Eater, Poulan, and Poulan Pro.
This part is a replacement clutch cover assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective clutch cover assembly in line trimmers.Clutch cover assemblies are important as they help to cover and protect the clutch. This keeps the clutch from being subject to unnecessary damage by dirt and debris or contact with solid objects. If the cover is cracked, worn, or ineffective, it should be replaced. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this clutch cover assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This clutch cover assembly can be used with different models of line trimmers that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.