Parts for Kenmore 417.29042991 (41729042991, 417 29042991): Drums Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Counterweight ring that stabilizes your washer tub during spin cycles. Replace if cracked, broken, or missing to restore proper drum balance.

Carriage bolt for washers. Secures internal components and panels. Replace if missing, stripped, or corroded to restore proper assembly and fit.

Carriage bolt for washer assemblies. Secures structural components and mounting hardware. Replace if missing, stripped, or corroded during repairs.

Carriage bolt for washer assemblies. Secures structural components and mounting hardware. Replace if missing, stripped, or corroded during repairs.

Prevents leaks and seals your washer door during wash cycles. Replace if torn, moldy, or causing water leakage. Verify fit with your model number.

Replacement mounting nut for washers and laundry appliances. Secures internal components and panels. Order if original nut is stripped, missing, or broken.

This suspension spring supports the washer tub and helps stabilize the drum during spin cycles to reduce vibration and noise. Replaces a worn or broken tub spring to restore smoother operation. What it does

• Holds and stabilizes the inner tub assembly to limit excessive movement during spins
• Helps reduce vibration and rattling that can occur from a loose or broken spring
• Prevents tub misalignment that can cause rubbing or noise
• Works with the washer's suspension system to maintain proper spin balance

• One suspension (tub) spring as shown

• Disconnect power and water supply before starting any repairs
• Springs are under tension; use caution and proper tools to remove/install
• Inspect other suspension components (shocks/rods, mounts) and replace if worn

Support plate for washer components. Mounts internally to secure parts in place. Replace if cracked, bent, or missing to restore proper structural support.

Front tub shell for your washer. Replacement needed when the outer tub is cracked, broken, or has pieces breaking off during operation.

Replaces cracked or broken suspension springs that support the drum in front-load washers. Installs at top of tub assembly. Sold individually.

Hex washer head screw secures panels, brackets, and drum assemblies in washers. Replace rusted, stripped, or missing screws to prevent rattling.

Fix loud banging, grinding noises, or oil leaks during spin with this inner tub assembly. Includes spider and shaft. Advanced repair, 2-4 hours.

Replaces cracked, broken, or missing drum baffle that lifts and tumbles laundry inside your washer. Prevents fabric snags and restores proper movement.

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

This main motor assembly powers the dryer's drum and blower so the load tumbles and air circulates for drying. Replaces a worn or failed motor to restore normal tumble and airflow performance. What it does:

• Turns the drum and drives the blower to move air through the dryer
• Restores tumbling when the dryer won't rotate or only hums
• Helps correct slow or inconsistent drum rotation caused by motor failure
• Works with the dryer's belt and idler to maintain proper drum tension

• Disconnect power before beginning any repair
• Handle motor and wiring harness carefully; match connectors and mounting orientation
• Test operation after installation before reassembling panels

Secures the motor housing to its mounting bracket in washers and laundry centers. Replace if screw is missing, stripped, or damaged during service.

Seals front and rear tub halves to prevent water leaks. Replace if you notice leaking during wash cycles or after bearing repair. Verify fit with your model.

Includes bearing and seal. Bearing is not available separately.

The Drum Drive Belt is an OEM part for Frigidaire dryers. It connects the drum to the motor, enabling the drum to rotate and tumble the clothes during drying cycles. The belt is 54 inches long and 5/8 inches wide

You should replace this drum drive belt if it becomes worn out, frayed, or broken due to the high heat and friction involved in the drying process. Additionally, improper loading or overloading of the dryer can cause the belt to stretch or snap.

Symptoms of a bad drum drive belt include:

• Dryer drum not turning
• A loud thumping or squealing noise during operation
• Dryer stopping mid-cycle
• Clothes remaining wet after the drying cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Flat washer used to secure components in washers, dryers, and laundry centers. Replace if washer is missing, bent, or corroded during repairs.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replace your washer's 3/8 inch lock washer. Secures internal components and hardware connections. Order a new one if bent, missing, or worn out.

Shock absorber kit for front-load washers. Includes 2 absorbers, pins, and hardware. Replace when broken, cracked, or worn to restore stability.

Secures the shock absorber to the outer tub in your washer. Replace if the pin is broken, cracked, or missing to restore proper shock mounting.

Phillips pan head screw for securing panels and components in appliances. Replace missing, stripped, or corroded screws during repairs or maintenance.

Cushioned fastener washer that protects surfaces and reduces vibration. Replace if cracked, compressed, or missing to prevent metal damage and loosening.

Washer won't drain or makes loud whining noise? This drain pump removes water between cycles. DIY repair takes 30-40 minutes with basic tools.

Sump hose connects the washer tub to the drain pump. Replace if cracked, leaking, deteriorated, or has holes causing water leaks during wash cycles.

Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.

Secures hoses on your washer to prevent leaks and water damage. Replace if loose, cracked, or during hose repairs. Verify fit with your model number.

Replacement bushing that cushions and centers the washer's top panel. Needed when original is worn, cracked, or missing, causing panel rattles or loose fit.

This cushion is a small mounting pad that helps reduce vibration and cushions contact between moving or mating parts, improving fit and reducing noise. Use it to replace worn or missing cushions that allow rubbing, rattling, or uneven contact. What it does:

• Pads and isolates components to cut down on vibration and noise
• Prevents direct hard contact that can cause wear or chafing
• Helps maintain proper alignment between parts that bear weight or move
• Commonly used where a soft stop or spacer is needed to prevent rattling

• One cushion

• Inspect the mating surfaces and remove debris before installing the cushion
• Install in the same orientation as the original part; hand-press or gently tap into place
• Do not use adhesives or solvents unless specified by the equipment manufacturer

This is a replacement parts list—an illustrated diagram sheet that helps identify components and part numbers for service and ordering. Keep it with your owner's paperwork to simplify repairs and parts lookup. What it does:

• Shows exploded diagrams and part numbers for the appliance to speed identification
• Serves as a quick-reference for technicians during diagnostics
• Reduces guesswork and potential returns by matching parts visually

• Not a functional or electronic component; no installation required
• Keep with the appliance manual or service records for future reference
• Protect from moisture and heavy creasing to keep diagrams legible

Shipping bolt kit secures the washer drum during transport. Replace missing or lost bolts when moving your washer to prevent damage to the suspension system.

Lower spring tub sleeve for washers. Protects and guides the suspension spring connection to the tub. Replace if cracked, worn, or missing.

Upper spring tub sleeve for washers. This bushing cushions the suspension spring connection to the tub. Replace if worn, cracked, or missing.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.