Dryer Baffle Parts

This replacement drum baffle helps lift and separate clothes as the dryer tumbles so items dry more evenly and move freely. Fits into the dryer drum to restore proper fabric circulation and reduce bunching. What it does:

• Lifts and guides clothes during tumbling to improve airflow and drying consistency
• Helps prevent items from wrapping or bunching against the drum
• Can reduce loud thumping or scraping noises caused by a loose or broken baffle
• Addresses symptoms such as uneven drying, items clumping together, or abnormal drum noises

• One drum baffle

• Disconnect power before beginning any work; follow the dryer's service manual for panel removal and reassembly
• Replacement typically requires opening the dryer cabinet or removing the drum—use proper tools and follow model-specific instructions
• Retain existing screws or fasteners unless new hardware is specified for your model

This white baffle cylinder is the replaceable tub/agitator baffle that helps move and separate laundry during the wash cycle for proper cleaning action. It restores agitation and water flow when the original baffle is worn or damaged. What it does:

• Channels water and works with the agitator/tub to help move clothes for improved washing action
• Helps reduce tangling and keeps items circulating through the wash zone
• Replaces cracked, broken, or excessively worn baffles that cause poor agitation or noisy operation
• Matches the original white finish for a factory appearance

• Disconnect power and water supply before beginning any repair
• Basic tools typically required; may need to remove agitator or access cap—refer to your model's service manual
• Inspect mating surfaces and fasteners; replace any worn hardware and ensure proper seating to avoid agitation issues

The Drum Baffle is an OEM part for GE electric and gas dryers. Located inside the rotating drum, this baffle helps separate and tumble fabrics efficiently during drying cycles. 

Symptoms of a damaged or improperly functioning baffle include:

• Excessively long dry times 
• Items not fully drying or left damp after a cycle
• Increased tangling or bunching of clothes within the drum

Causes stem from cracking/breaking under repeated impacts from swinging loads, general wear over extended use, or damage upon removal of tightly packed fabrics.

This genuine GE replacement restores balanced tumbling action within the drum. 

This drum baffle restores proper tumbling by lifting and separating laundry as the dryer drum rotates. It helps improve drying performance and reduces garment bunching. What it does:

• Lifts and tumbles clothes so air flows more evenly through the load
• Helps prevent garments from clumping or wrapping around the drum
• Can reduce rubbing, thumping, or scraping noises caused by a loose or damaged lifter
• Restores consistent drum contact and improves drying efficiency

• Disconnect power before starting any repair to avoid shock or injury
• Access typically requires opening the dryer cabinet or front panel; small tools may be needed
• Align the baffle with factory mounting holes and secure with existing fasteners; use correct screws if replacements are required
• Inspect and replace worn drum or support parts as needed for reliable operation

This replacement air baffle vane directs cooled air inside the refrigerator to help maintain even temperature distribution and proper airflow between compartments. Replaces a cracked or missing vane to restore intended airflow control. What it does:

• Directs and channels cold air from the evaporator to the refrigerator/freezer compartments
• Helps reduce uneven cooling and temperature stratification
• Prevents excessive airflow in one area that can cause frost buildup or warm spots
• Replaces broken, cracked, or warped vanes that rattle or obstruct airflow

• Disconnect power before beginning any repair to avoid electrical hazard
• Access typically requires removing shelves or the evaporator cover; keep parts organized
• Handle gently to avoid cracking the replacement vane during installation
• Use basic hand tools;

The Dryer Drum Lifter is an essential component designed to support the drum in your Samsung dryer. This genuine OEM part ensures a precise fit and reliable performance, helping to maintain the smooth operation of your appliance. The drum lifter plays a key role in minimizing noise and reducing vibrations, which enhances your drying experience and protects other parts of the dryer from undue stress. Installing this part is straightforward, allowing you to replace a worn or damaged lifter easily and restore your dryer's functionality without the need for professional help. Additionally, the Dryer Drum Lifter is compatible with a variety of Samsung dryer models, ensuring versatility and ease of use. By choosing this genuine OEM part, you are investing in durability and optimal performance for your dryer. Trust the Dryer Drum Lifter to keep your Samsung dryer running efficiently and extend the life of your appliance, providing you with reliable and consistent drying results every time.

This drum baffle restores proper fabric tumbling and gentle movement inside the dryer drum for more even drying and fewer snags. It fits the drum to help lift and separate items during the cycle. What it does:

• Lifts and guides clothes as the drum rotates to promote consistent tumbling
• Reduces fabric bunching and helps improve air exposure for more even drying
• Prevents garments from riding on the drum seam and reduces rubbing/snags
• Can stop or reduce thumping or uneven tumbling when a worn baffle is the cause

• One drum baffle

• Disconnect power before beginning work
• Installation typically requires opening the dryer's front or top panel and rotating/removing the drum—follow your model's service manual
• Keep track of fasteners and note baffle orientation; replace any damaged clips or screws
• Wear gloves and eye protection; watch for sharp edges and pinch points during reassembly

This drum baffle is the interior vane that lifts and tumbles clothes inside the dryer drum, helping move garments for even drying and reducing tangling. It replaces a worn or broken vane to restore normal tumbling action. What it does:

• Guides and lifts clothes as the drum rotates to improve airflow and drying consistency
• Reduces garment bunching and helps prevent tangling during cycles
• Prevents direct cloth contact with the drum shell where worn or broken baffles can catch fabric
• Restores proper drum rotation balance when a missing or damaged baffle causes wobble or uneven wear

• Intended for a user familiar with appliance repair; disconnect power before servicing
• Typically installs from inside the dryer cabinet or by removing the drum; follow OEM diagram for exact procedure
• Inspect mounting tabs and screws; replace any damaged fasteners for a secure fit
• If dryer shows additional noise or vibration after replacement, recheck alignment and mounting hardware

The Dryer Drum Baffle is an OEM part for LG dryers. This baffle is attached to the inside of the dryer drum and is designed to help lift and tumble clothes during the drying cycle. 

Causes of a bad dryer drum baffle can include wear and tear from regular use, physical damage from heavy or sharp objects, or becoming loose due to vibration over time. 

Symptoms of a bad dryer drum baffle include:

• Thumping or banging noises during the drying cycle
• Clothes not tumbling properly, leading to uneven drying
• Loose or rattling baffle inside the drum
• Visible damage or breakage on the baffle

This OEM LG part is also compatible with some Kenmore models.

A lower-rack lifter that secures and guides the dishwasher's bottom rack for smooth movement and correct positioning. Restores proper rack height and alignment so dishes load, wash, and drain without interference. What it does:

• Supports and raises/lowers the lower dish rack to the correct operating position
• Keeps the rack aligned on its track to prevent binding or rough movement
• Reduces rack rubbing against tub walls and helps ensure proper spray-arm clearance
• Commonly replaced when the rack drops, won't stay level, or moves unevenly

• Disconnect power and turn off water supply before servicing dishwasher
• Remove lower rack to access and replace the lifter; no special tools typically required
• Verify proper seating on the rack guide and smooth operation before returning unit to service
• If other rack components are damaged, inspect for worn wheels or track issues

This drum vane replaces a damaged or missing dryer drum lifter that helps lift and tumble clothes for even drying and gentle fabric movement. Restores proper tumbling and reduces fabric snags when installed correctly. What it does:

• Lifts and guides clothing as the dryer drum rotates to promote even tumbling.
• Prevents clothes from bunching or staying in one spot during a cycle.
• Reduces scraping, thumping, or uneven noise caused by a broken or missing vane.
• Helps maintain proper drum rotation and load distribution.

• Disconnect power to the appliance before starting any repairs.
• Access the drum per your model's service instructions (front panel or cabinet removal may be required).
• Align the vane with the drum mounting points and secure using the original fasteners; replace damaged clips or screws if needed.
• After reassembly, run a short no-heat cycle to ensure smooth drum rotation and correct installation.