Dryer Accessories

The Moisture Sensor Holder is an OEM part for LG dryers. It is designed to securely house the moisture sensor, which detects the moisture level in clothes during drying cycles to adjust drying time and ensure efficient operation.

Causes of a bad moisture sensor holder can include wear and tear from regular use, damage from physical impact, or warping due to exposure to high temperatures.

Symptoms of a bad moisture sensor holder include:

• Inaccurate drying times
• Clothes remaining damp after a cycle
• Dryer running longer than necessary
• Sensor falling out of place

This OEM LG part is also compatible with some Kenmore models.

Includes 2 adhesive pads, 2 brackets, 4 screws, and installation instructions.

This accessory assembly is the factory-specified kit used to attach or secure designated parts on your appliance. Replacing missing or worn pieces restores a solid, factory fit and finish.

• Provides the original mounting/attachment components specified for your model
• Replaces lost or damaged hardware after installation, moving, or service
• Helps correct loose, misaligned, or rattling parts caused by missing fasteners
• Maintains proper alignment and appearance of exterior parts such as trim or handles

• Disconnect power; also shut off water and/or gas supplies before servicing
• Protect finished surfaces; start fasteners by hand to avoid cross-threading or damage
• Follow your model's service or installation guide for correct order and placement
• After assembly, verify everything is secure and test operation before returning to service

This door reversal kit provides the hardware needed to change the door swing to the opposite side on compatible appliances. Reverse the hinge and strike positions to improve access in tight spaces or match your layout.

• Reverses door swing by relocating the hinge and door strike to the opposite side
• Helps prevent interference with nearby walls, cabinets, or adjacent appliances
• Useful when rearranging a laundry pair or installing in a narrow alcove
• Not intended to repair damaged hinges, latches, or warped doors

• Disconnect power and, if applicable, gas supply before servicing
• Support the door during removal; a second person is recommended
• Move hinge/strike and reinstall fasteners per instructions; avoid overtightening into metal or plastic
• After conversion, verify latch engagement and door seal before use

This stacking kit secures a dryer on top of a compatible washer to save floor space and stabilize the stacked units. It helps keep the dryer aligned and reduces shifting or rocking during use. What it does:

• Provides a secure connection between dryer and washer to create a stable stacked laundry configuration.
• Helps prevent the dryer from sliding, tilting, or shifting during spin cycles — common signs a stack kit is needed.
• Uses brackets and mounting hardware to fasten the dryer to the washer and maintain alignment.

• Disconnect power to both appliances and follow all safety precautions before starting installation.
• Have a second person assist when lifting or positioning the dryer to avoid injury or damage.
• Follow the OEM installation instructions and torque guidance for mounting hardware; ensure both appliances are level and stable after installation.

This 38-inch stacking kit lets you securely mount a dryer on top of a matching washer to save floor space and stabilize the stacked units. It provides a tidy, secure connection for paired laundry appliances. What it does:

• Secures the dryer to the washer to reduce the risk of tipping or shifting during operation
• Keeps stacked appliances aligned for safer, more stable operation
• Helps minimize vibration transfer between machines for quieter performance
• Enables space-saving stacked installation in closets or compact laundry areas

• Follow the washer and dryer installation manuals and the kit instructions exactly for proper fit and safety
• Disconnect power and gas (if applicable) and empty both appliances before installing
• Installation may require two people and basic hand tools for safe handling of appliances

The Installation Kit is an OEM part for Frigidaire washing machines. It is a kit that provides all the necessary installation hardware to securely mount a washing machine on a pedestal. Having a properly installed and level pedestal is important to ensure stability during the wash cycle and reduce vibration and noise.

Causes may include missing hardware, damaged or worn parts in the existing pedestal, or inadequate installation. This replacement kit from Frigidaire includes mounts, brackets, screws, and leveling components to facilitate a straightforward and proper installation.

Symptoms of a bad or improperly installed pedestal can include:

• Excessive shaking and movement of the washer during operation
• Drain leakage or hose connections coming loose over time
• The washer developing alignment or leveling issues
• Noise and sounds that worsen over repeated use

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This steam kit is the OEM steam generator assembly that supplies steam for steam-refresh and wrinkle-care cycles. It restores the appliance's ability to produce steam for improved fabric care and odor removal. What it does

• Heats and releases water as steam into the drum during steam cycles to help relax wrinkles and freshen clothes.
• Addresses weak or no-steam symptoms when the dryer runs steam cycles but garments remain untreated.
• Works with the appliance's control system to deliver steam only during designated cycle phases.
• Helps reduce the need for ironing by loosening fabric fibers during the cycle.

• One steam generator assembly (steam kit) as shown.

• Disconnect power before starting any repair to avoid shock or flooding.
• Suitable for technicians or experienced DIYers; follow the appliance service manual for disassembly and routing of water/steam lines.
• Inspect and replace any brittle or cracked tubing and seals to prevent leaks; test for proper steam delivery after installation.
• Do not operate the dryer with missing or damaged panels; ensure all connectors are secure.

This coupler connects the washer motor to the gearcase so the motor can turn the transmission and drive the washer's agitator and spin functions. Replacing a worn coupler restores reliable power transfer and normal wash cycles. What it does:

• Transfers torque from the motor to the gearcase so the washer agitates and spins
• Dampens shock between motor and transmission during load changes
• Worn or broken couplers can cause no-agitate/no-spin, slipping, or loud grinding noises
• Prevents direct metal-to-metal contact that can damage motor or gearcase

• Disconnect power and water supply before starting any repair
• Support the tub or transmission per the OEM instructions before removing the old coupler
• Inspect motor shaft and gearcase input for damage; replace additional parts if scored or worn
• Use basic hand tools; follow OEM diagram for proper alignment and secure fit

Replacement Stackit2 3.0 module (TAW) designed to restore the intended fit and function of the Stackit2 assembly in compatible appliances. Offers a like-for-like replacement to address wear, damage, or missing pieces. What it does

• Replaces a worn, cracked, or missing Stackit2 3.0 module to restore proper assembly fit.
• Helps eliminate rattling, misalignment, or instability caused by a damaged module.
• Restores the original mounting/stacking interface so the appliance components seat correctly.
• Useful when visual damage or loss is present at the Stackit2 connection point.

• One Stackit2 3.0 module (TAW) as pictured.

• Disconnect power to the appliance before attempting any repair.
• Inspect surrounding components for additional damage before installing the replacement.
• Install in the original orientation; secure any fasteners removed during disassembly.

This replacement drawer restores the refrigerator's storage compartment so food stays organized and accessible. Durable molded plastic provides a stable, easy-to-clean bin that helps contain spills and separate items. What it does:

• Holds and organizes refrigerated items to maximize usable space
• Slides into the cabinet on factory rails for smooth access
• Replaces cracked, warped, or broken drawers that can catch or spill contents
• Helps maintain proper airflow distribution by fitting the intended compartment

• Empty the drawer and remove any shelves or rails that block access before installing
• Handle with care to avoid scratching or cracking; use two hands for larger drawers
• Align drawer tracks with cabinet rails and slide in until fully seated
• If drawer binding occurs, verify rails are clean and undamaged before use