Need Help?
Call or text
This is a replacement carburetor for Husqvarna string trimmers and is also used on some Craftsman models. It consists of an aluminum body with a bright blue choke and cherry red primer bulb. Engines rely on a mixture of fuel and air for proper operation. In a small engine, the fuel and air mix inside the carburetor. This is achieved with a series of small channels, which release a fine mist of fuel into a vortex of air. When one of these channels gets clogged, it can negatively impact engine performance. Carburetors can often be cleaned with a commercial carburetor cleaning spray, but this is sometimes not sufficient to clean a badly clogged carburetor. In this case, other measures such as hypersonic cleaners can often be effective, but they’re not always worth the cost. The alternative is replacing the entire carburetor, which can be done using this kit. This is an OEM part sourced directly from the manufacturer, and it is sold individually. A heat shield is also included with the kit.
Installed new carburetor kit Read more
Usually ships within 4 - 14 days
The chainsaw carburetor mixes air and gas before this mixture makes its way to the engine. If this is not working correctly, the engine receives a less efficient gas supply or no gas supply at all. If your chainsaw has a full tank of gas but will not start or stops just after starting, the carburetor may need to be replaced. While carburetors can be cleaned to get them working again, they often need to be replaced if they have become too clogged. Depending on what you can reuse from your old carburetor, you may need to order new gaskets as well to ensure an airtight seal. A screwdriver, a nut driver, and a socket wrench set may be needed to complete this repair. This chainsaw carburetor is sold individually from other parts, but it does include the primer bulb. It is compatible with Craftsman and Poulan chainsaws. This chainsaw carburetor is a genuine OEM part.
Ordered plastic tubes, filter, gas cap, new carb. Read more
This replacement part is a carburetor gasket intended for use in lawn equipment. This is a genuine replacement part made by MTD. This specific part is situated next to the carburetor and ensures that the air stays where it needs to be and keeps the carburetor running smoothly. The carburetor is then able to regulate the air flow so that the appliance is able to run properly and continuously.A new carburetor gasket might be needed if the appliance is unable to start or stops while in use. If air is getting into places it shouldn't, it is possible the gasket is malfunctioning. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by MTD.
This is a genuine MTD fuel cap replacement made for use on select snowblowers. It features a molded gasket for secure sealing and less risk of losing parts. The fuel cap is responsible for securing the fuel in the fuel tank during operation so that it doesn't spill out. There is an air hole in the cap to prevent pressurization of the fuel, ensuring safe operation at all times. This cap is made of plastic and it can become cracked or stripped with regular use. If it is damaged, the fuel will not be secure and the machine will not be safe to use. That will require an immediate replacement. This OEM fuel cap is made to exact standards by MTD and is compatible with several models of snow blowers and snow throwers. It is also capable of fitting select models from Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. It features an easy plastic grip and a seal to prevent spillage. It can be installed with no tools and is sold as an individual unit. It is easy to screw the new cap into place, but be sure to thread the screw properly to prevent accidental stripping or misthreading that can cause the cap to get stuck.
The torsion spring is designed to create tension between various components in lawn and garden equipment engines. This spring may have multiple applications depending on the type of machine. The torsion spring typically connects levers and other things that need pressure to operate properly. They create torque and help support various items in lawn and garden machines. Over time, they can become worn or the springs can stretch or snap. This will require a replacement of the entire spring, since the unit will typically not be able to function without a properly working torsion spring. This genuine OEM replacement spring is manufactured to exact standards by MTD. This part can be found in hundreds of models from MTD, Yard Machines, Cub Cadet, Troy-Bilt, Husky, Bolens, and Yard-Man. Check the parts diagrams and equipment manual for the exact location and application of this torsion spring. This high-quality spring is made of metal and is sold as an individual unit. Always wear gloves when performing repairs on lawn and garden machines. Beware of pinching and crushing injuries when working with springs, which are typically under a lot of pressure.
This is a riding mower fan that works as a replacement for damaged fans for many mower and tractor models. This fan connects to the transaxle above the pulley. The purpose of the fan is simple—it helps to move air around the transmission, which will prevent overheating. If the machine's engine is running hot, a problematic fan could be to blame. Check the fan and replace it if needed. If the fan doesn't run, the tractor will overheat and not operate properly. Overheating could cause further damage to the engine.The fan is made from high-quality plastic. It should last a long time without worry, but blades could crack and break off eventually due to wear and tear. The fan could also be damaged because of an accident. Regardless, replace the fan.The riding mower fan serves as a replacement for tractors and riding mowers from Jonsered, Husqvarna, and Craftsman. It is sold individually and is a genuine OEM replacement part.
This is a replacement fuel bowl gasket that is specifically made for select models of snowblowers. The fuel bowl gasket is used to create a seal in the fuel bowl, allowing the carburetor to maintain appropriate pressure and deliver the fuel properly throughout the engine. Over time, gaskets like this one will become compressed and deteriorated, creating a leak in their seal. This can lead to fuel or air leakage, poor engine performance, and more serious damage if left unrepaired. Replacing gaskets is typically considered routine maintenance, and it is essential to replace them as quickly as possible. This genuine fuel bowl gasket is manufactured to OEM specifications by MTD and designed for use in select machines from MTD, as well as those from Cub Cadet, HUSKEE, Lawn Chief, RYOBI, Troy-Bilt, Craftsman, Remington, Yard Machines, Yard Man, and Bolens. There are hundreds of machines that can use this fuel bowl gasket. It is made of durable rubber material and sold as a single unit. Always be sure to inspect gaskets when performing other maintenance and repairs and use the correct tools for gasket replacement to prevent damage during installation.
This is a genuine replacement for Echo 3 x 6 x 80 clear yellow pipe. The pipe is used on various engines and lawn and garden machines to transport fuel between the fuel tank and the carburetor. This pipe is made of durable plastic material, but it can become brittle and crack or break over time. This could lead to leaks or even a total engine failure, which is why it is important to replace pipes as soon as possible to ensure that further damage does not occur. This replacement part can repair various compatible machines that require a genuine Echo part. This clear fuel line pipe is designed to work with tillers, trimmers, blowers, and other lawn and garden equipment with small engines made by Echo. It is important to drain the fuel from the engine and the fuel tank before beginning any work on the fuel system. Allow the engine to cool completely and wear gloves whenever performing engine repairs. This pipe is sold as a single unit and does not include any hardware or additional parts.