Need Help?
Call
Controls gas emissions from small engines on lawn equipment. Replace if cracked, saturated, or engine fails emissions. Confirm fit with your model number.
Usually ships within 4 - 14 days
Engine won't shut off or runs after ignition is turned off? This fuel shut off solenoid valve kit controls fuel flow. Includes gaskets for install.
This is a genuine OEM carburetor rebuild kit sourced directly from the manufacturer and is intended for use with lawn tractors. This rebuild kit saves money when the carburetor is not working up to its full potential. If the carburetor is clogged, it won't get enough fuel and the engine won't run efficiently. The carburetor creates the air and fuel mixture that causes the cylinders to ignite and run the engine. If any of the seals or gaskets are worn and fuel leaks from the carburetor or air gets inside, the ratio of fuel to air will be off and the engine may sputter or not run at all. Before rebuilding the carburetor, you can test it to determine if it needs to be repaired or if there are other potential issues. First, remove the air filter from the lawn tractor and pour a little gas directly into the carburetor. Start the engine. If the engine dies quickly after starting, the carburetor should be rebuilt. This kit contains all the gaskets and o-rings needed to rebuild the carburetor. Make sure there is no fuel in the engine when you work on the carburetor.This kit is made to be compatible with lawn tractor engines manufactured by Yard Machines, MTD, Cub Cadet, Husky, Yard-Man, and Troy Bilt. It is sold as an individual unit.
Won't start or pull cord snapped? This recoil starter assembly engages the flywheel to start your mower, tiller, or chipper. Moderate DIY repair.
This genuine OEM Part is a choke temperature control rod for lawnmowers. The choke temperature control is the metal piece that regulates the choke temperature allowing for it to function properly within a lawnmower. If the choke function is no longer working efficiently, it might be time to replace the choke temperature control. Luckily, replacing this part is a simple repair.Before beginning, make sure the engine is cool to avoid getting burned. Locate the old choke temperature control rod and remove the screws to the mounting assembly that hold the rod in place. Once removed, lift the old choke temperature control out and away from the mower and set it to the side. Replace with the new control rod and secure the mounting screws. Start up the mower to see if the choke function is working properly. If it does, the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.
Complete carburetor assembly for chipper shredders and vacuums. Replaces damaged or worn carburetors that affect fuel-air mixture delivery to the engine.
Replacement pre-filter that traps large debris before it reaches the main air filter. Replace when visibly dirty or damaged to maintain engine performance. Verify fit.
Prevents dirt, dust, and debris from entering your engine. Replace when dirty or clogged to maintain performance. Confirm fit with your model number.
This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.
Can't start your engine? A frayed or broken starter rope grip prevents pull-starting. This replacement rope grip restores easy starting in 15 minutes.
Engine oil filter traps contaminants to protect internal components. Replace during oil changes or when engine performance decreases. Verify fit with your model.
Engine won't start or runs rough? This carburetor overhaul kit restores proper fuel delivery. Includes gaskets, diaphragms, and seals. Moderate skill.
Engine won't start or pull cord doesn't retract? This rewind starter assembly restores pull-start function on lawn and garden engines. Moderate DIY repair.
Sealing washer creates a tight seal between engine components to prevent leaks. Replace if you notice oil or fluid leaks. Verify fit with your model number.
Seals the air cleaner to prevent unfiltered air and debris from entering your engine. Replace if cracked, compressed, or causing rough running.
Engine won't start or keeps running after key turned off? This ignition key switch controls engine power and startup. Common fix for starting issues.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.