Frigidaire Lens & Related Parts

The Indicator Light Lens is an OEM part for Frigidaire ranges and cooktops. It is designed to cover and protect the indicator light bulb, which signals when a burner is turned on or if the cooktop is still hot after use. This small component ensures that the light is visible and diffused properly, helping to prevent accidental burns or other safety issues.

Symptoms of a failing Indicator Light Lens include:

• Cracking or damage to the lens that impairs visibility
• Discoloration that makes it hard to tell if the light is on
• The lens becoming loose or falling off
• The light appearing overly bright or unfiltered

Causes of a bad indicator light lens typically involve high heat exposure, which can lead to cracking or warping, or accidental impacts during cleaning or use.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

250V.

This replacement lens is the clear plastic light cover that protects and diffuses the oven/microwave/refrigerator interior lamp so you get even illumination and keep the bulb shielded from spills and debris. It restores proper light output and appearance. What it does:

• Shields the interior light bulb from food, grease and moisture
• Diffuses and directs the lamp's output for more even illumination
• Helps prevent direct contact with the hot bulb during use
• Common signs you need this part: cracked, cloudy or missing lens, or visible bulb exposure

• One replacement lens

• Disconnect power or unplug the appliance before servicing to avoid shock
• Allow bulb and surrounding areas to cool before removing or installing the lens
• Handle the lens carefully to avoid scratches; use a soft cloth if needed

Indicator light replaces the control-panel lamp that signals power or active functions, restoring visible status feedback for safer, more confident operation. Use this when the original lamp is dim, cracked, or fails to illuminate. What it does:

• Provides visible indication of power, cycle status, or selected functions on the appliance control panel.
• Restores clear status feedback when the original lamp is burned out or flickering.
• Helps troubleshoot whether a control or circuit is receiving power by showing when the indicator should be lit.
• Improves usability so settings and operating states are easy to confirm at a glance.

• Disconnect power to the appliance (unplug or turn off the breaker) before beginning work.
• Access may require removing the control panel or console.
• Handle the lamp carefully and avoid touching bulb surfaces; use gloves to prevent oil transfer.
• After installation, restore power and verify the indicator lights as expected; if it still does not light, further electrical diagnosis may be needed.

This light shield is the clear interior lens that covers and protects the refrigerator light, helping diffuse lamp output for even illumination and keeping the bulb shielded from spills and bumps. What it does:

• Covers and protects the interior lamp from food, moisture, and impact
• Diffuses light for more even brightness inside the compartment
• Helps prevent direct contact with the hot bulb for safer operation
• Commonly replaced when cracked, cloudy, or missing

• Disconnect power to the appliance before starting work
• Remove any shelving or clips blocking access to the lens before lifting out the old shield
• Handle the replacement lens carefully to avoid cracking; secure with original clips/screws per factory fit
• If you see damage to mounting clips or wiring while installing, stop and verify those parts before restoring power

The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.

Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.

Symptoms of a bad freezer lens include:

• Cloudiness, fogginess, or smears inhibiting internal visibility
• Cracks or breaks compromising the protective barrier
• Distorted views make it difficult to assess food levels
• Diffused lighting with shadows instead of a clear view

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This interior light assembly restores illumination inside the refrigerator so you can see contents clearly and safely access food. It fits the factory light location and replaces damaged or non-working lamp components. What it does:

• Houses and secures the refrigerator interior lamp so it stays lit and positioned correctly
• Provides the electrical connection for the bulb so the light turns on when door opens
• Restores visibility if the original lamp assembly is cracked, loose, or fails to light
• Helps prevent food spoilage-related accidents by improving interior visibility

• Disconnect power to the refrigerator before replacing the light assembly to avoid shock
• Remove the lens/cover and replace the assembly per manufacturer instructions
• Handle bulbs with care; use recommended bulb type and wattage specified by the appliance maker