Frigidaire Dishwasher Cable Or Retainer

The Door Cable is an OEM part for Frigidaire dishwashers. It is a component that connects the dishwasher door to the frame, controlling movement when accessing the tub interior.

Causes of a bad cable can be related to wear and tear over extended use, damage from faulty installation, impacts that deform the metal casing, or defects present since manufacture. Regular cycling of the door over many years places repeated stress on the cable.

Symptoms of a bad door cable: 

• Failure to open or close the door smoothly
• Lack of proper alignment
• Snapping/popping noises
• Door not sealing tightly against the gasket.

This OEM replacement part is also compatible with dishwashers made by Electrolux, Kenmore, and some KitchenAid models.

The Spring and Cable Assembly is an OEM replacement part for Frigidaire dishwashers. It contains both a spring and cable that coordinate moving parts to provide a balanced opening and closing of the dishwasher door.

Causes of a bad assembly can include failure of internal spring components due to fatigue from extensive use over time. Cables may also experience wear from constant flexing during door movement.

Symptoms of a bad Spring & Cable Assembly include:

• A sagging or unstable door that does not stay securely closed
• Difficulty smoothly opening and closing the door
• Improper latching that allows door to pop back open
• Excessive noise and vibration occurring during wash cycles

This OEM part fits Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Door Spring Linkage is an OEM part for Frigidaire dishwashers. This part connects the door springs to the dishwasher door, ensuring smooth and balanced opening and closing of the door.

Causes of a bad door spring linkage can include wear and tear from frequent use, physical damage from impacts or mishandling, or deterioration over time.

Symptoms of a bad door spring linkage include:

• The dishwasher door not staying open or closed
• Difficulty in opening or closing the door
• A loose or sagging door
• Unusual noises when operating the door

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This pulley is part of the dishwasher door balance system. It guides the door cable and spring so the door opens smoothly and stays controlled. A worn pulley can make the door feel heavy, drop open, or squeak.

• Routes the door balance cable between the hinge and spring to manage door tension
• Reduces friction for smooth, even door movement
• Helps prevent the door from slamming open or feeling excessively heavy
• Common symptoms: door drops or slams, won't hold a partially open position, squeaks or grinds near the base

• Disconnect power and turn off water supply before servicing
• Carefully relieve door spring tension; springs and cables are under load
• Pull the dishwasher forward to access the side frame area where the pulley mounts
• Note the cable routing before removal; install the new pulley and balanced door operation

This pulley guides the dishwasher door's balance cable so the springs can counterweight the door. Replacing a worn or broken pulley restores smooth, controlled door movement and helps prevent the door from dropping or feeling heavy.

• Guides the door balance cable/cord to maintain proper spring tension
• Helps the door open and close smoothly and evenly
• Visible cracks, wobble, or flat spots on the wheel indicate replacement

• Disconnect power and shut off water before servicing
• Remove the toe-kick to access the side spring/cable area
• Support the door and carefully relieve spring tension; note the cable routing through the pulley
• Install the new pulley in the original position and inspect related cable/link and spring for wear

This retainer lever secures and positions a moving component inside the appliance so doors, trays, or assemblies operate correctly. Replacing a worn or broken lever restores proper engagement and prevents loose or misaligned parts. What it does:

• Holds and guides a mating part or linkage in place to ensure consistent engagement
• Prevents assemblies from slipping or coming out of position during use
• Helps restore normal opening/closing or indexing behavior when the original lever is cracked or broken
• Works as a direct-fit replacement where the factory lever has failed

• One retainer lever

• Install with power disconnected and any moving assemblies supported or restrained
• Inspect adjacent clips, pins, or fasteners and replace if damaged—only the listed lever ships
• Use basic hand tools; avoid forcing components—ensure correct alignment before fastening