Frigidaire Dryer Control Board

The Control Board is an OEM replacement part for Frigidaire dryers. It is the central processing unit that controls all functions and operations of the dryer. The board receives input from sensors, activates heating elements and motor controls, and determines dryness levels based on temperature, moisture, and time settings. 

Causes of a bad control board can include failure due to wear and tear over time, exposure to heat and electrical stresses during normal operating cycles, as well as damage due to external impact or moisture intrusion. 

Symptoms of a bad control board include: 

• The dryer not starting or powering on
• Display/touchpad malfunctions 
• Failure to progress through cycles
• Inability to achieve set heat or time settings
• Erratic programs or operation

This OEM replacement is also compatible with Electrolux and some Kenmore model dryers.

The Control Board is an OEM replacement part for Frigidaire dryers. It is the central component responsible for regulating and monitoring all functions of the dryer. The control board monitors temperatures, runs diagnostic tests, controls the timers and cycles, and ensures proper operation of components like the drum motor, heating element, and moisture sensor. 

Symptoms of a bad control board include: 

• Dryer not turning on or operating
• Dryer not heating
• Dryer functions and cycles not working properly
• Error codes appearing 

Causes of a control board failure can be due to issues like electrical faults, moisture damage, or general wear and tear over time. 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Control Board Dryer is an OEM replacement part for Frigidaire electric dryers. As the central processing unit, the control board is responsible for operating all electronically controlled systems and components that enable the drying process. It precisely coordinates heating times and temperature, drum rotation, airflow, sensors, and more.

Causes of a bad control board can include damage due to moisture intrusion, defective electronic components, or general wear and tear over extended use.  

Symptoms of a bad control board include:

• The dryer failing to start, heat or tumble clothes
• Random restarting or stopping during cycles  
• Burning smells coming from the control board area
• Error codes flashing on the display

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore electric dryer models.

This electronic control board is the appliance's central controller, interpreting your selections and directing power to run each cycle. Replacing a failed board can restore operation when the console is dead, unresponsive, or cycles won't start or advance.

• Coordinates cycle timing and executes user-selected programs
• Switches power to components via on-board relays/triacs
• Monitors inputs/sensors and reacts to faults
• Common failure symptoms: no power/display, won't start, unresponsive buttons/knob, erratic lights or beeping, cycle won't advance

• Disconnect power before servicing; verify no voltage is present
• Use ESD precautions; handle the board by edges only
• Transfer any mounting brackets, screws, or decorative overlays from the original as required
• Reseat all connectors firmly; after install, run a test/diagnostic or a normal cycle to confirm operation

This dryer timer controls and advances the cycle you select, routing power to the correct components and shutting the dryer off at the proper time. Replacing a worn timer restores consistent cycle timing and end-of-cycle shutoff.

• Controls cycle selection and duration
• Advances the dial through the program and turns the dryer off at the end
• Routes power to dryer components at the correct times during the cycle
• Signs of a failing timer may include: cycle not advancing, running indefinitely, stopping early, or erratic timing

• Disconnect power; for gas dryers, also shut off the gas supply
• Remove the control knob and access the console to unmount the old timer
• Label or photograph wiring; move terminals to the new timer one at a time to avoid miswiring
• Align the timer shaft with the dial, secure the timer, and test operation before reassembly

This dryer timer is the cycle control that advances your dryer through Timed and Auto Dry settings. Replacing a failed timer restores proper cycle progression, start/stop, and end-of-cycle shutoff.

• Advances the cam and internal contacts to move the dryer through heat, motor, and cool-down steps
• Governs run time on Timed Dry and Auto Dry cycles
• Routes power to the correct circuits in sequence; a failed timer may not advance or may stop early
• Common symptoms include timer knob not moving, dryer running indefinitely, or not starting on certain settings

• Disconnect power; for gas models, also shut off gas
• Remove knob/dial, open the console, and unmount the timer
• Label or photograph wiring; transfer wires one at a time to the new timer
• Reassemble and test both a Timed Dry and an Auto Dry cycle

The Dryer Timer is an OEM part for Frigidaire dryers. It is responsible for controlling the drying cycles by regulating the amount of time the dryer runs. The timer ensures that clothes are dried according to the selected settings, contributing to efficient and effective drying performance.

Causes of a bad timer can include electrical issues such as a short circuit, worn-out internal components due to frequent use, or exposure to moisture that can damage the timer mechanism.

Symptoms of a bad Dryer Timer include:

• The dryer not advancing through cycles
• The dryer running continuously without shutting off
• Inconsistent drying times
• The timer knob not turning or feeling loose

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This electronic control board manages the appliance's cycles, timing, and key functions. Replacing a failed board can restore reliable operation when the machine won't start, won't advance, or behaves erratically.

• Interprets inputs from sensors/switches and the user interface
• Controls motors, valves, and heaters based on the selected cycle
• Manages cycle timing, speeds, and indicator lights
• Typical failure symptoms: no start, unresponsive controls, stops mid-cycle, won't advance, random error codes or power cycling

• Disconnect power before servicing to prevent electrical shock
• Use ESD precautions; handle the board by its edges
• Transfer any mounting brackets or jumpers from the old board to the new one
• Move wiring connectors one at a time to matching positions and verify full seating

This dryer timer controls the sequence and length of drying cycles. Replacing a failed timer restores consistent cycle advancement and automatic shutoff so your dryer starts, runs, and ends at the correct time. What it does:

• Advances the selected cycle by opening and closing internal switch contacts on schedule
• Coordinates start/run timing and end-of-cycle shutoff for timed and auto settings
• Common failure signs: timer knob doesn't advance, dryer runs too long or won't shut off, stops early, or only certain cycles work

• Includes 1 dryer timer assembly

• Unplug the dryer or disconnect power before servicing
• Access the timer from the console; remove the control knob and mounting screws to release it
• Transfer wires one at a time to matching terminals on the new timer using your model's wiring diagram
• Mount securely, reassemble the console and knob, then test for proper cycle advancement

This electronic control is the refrigerator's main control board that manages temperature, timing, and user inputs for reliable operation. Replaces a failed control to restore proper cycling and display responsiveness. What it does:

• Receives signals from sensors and user controls to regulate compressor and defrost cycles
• Manages temperature setpoints and timed defrost operations
• Powers and updates the front display and touchpad responses
• Stops or prevents normal operation when the control fails, causing no display, unresponsive buttons, or continuous running

• Disconnect power to the appliance before beginning any repair to avoid shock
• Handle the board carefully; avoid touching circuit traces and use anti-static precautions
• Installation typically requires removing the control panel or console; keep track of mounting hardware

This mechanical dryer timer controls cycle sequencing and timing for compatible Frigidaire-style electric dryers, restoring proper cycle advancement and user-selected timing. Fits as a direct-replacement timing/control module. What it does:

• Advances the dryer through timed cycles and user-selected settings
• Routes power to components per cycle position
• Helps correct symptoms like cycles that won't advance, no change between settings, or a stuck timer knob
• Replaces a worn or non-rotating timer mechanism that prevents normal dryer operation

• Disconnect power at the breaker or unplug the dryer before service
• Handle the control and timer gently; avoid bending terminals or stressing wiring
• Verify knob alignment and cycle indexing during reassembly
• Refer to the dryer service manual or wiring diagram for exact hookup and safety procedures

This main electronic control board manages refrigerator functions and restores user control to the appliance. Replaces a failed board to return digital controls, cycles, and timed components to normal operation. What it does:

• Receives and processes user inputs from the control panel and directs functions like cooling cycles and defrost.
• Controls compressor, fans, and defrost timing so the refrigerator maintains proper temperature regulation.
• Powers and updates the display and user interface; often replaced when the display or buttons become unresponsive.
• Common symptom fix: intermittent or complete loss of control panel response, erratic cooling behavior, or failure to initiate defrost cycles.

• One main electronic control board

• Disconnect power to the appliance before beginning any repair to avoid electric shock.
• Handle the board by the edges and avoid static discharge; wear an anti-static wrist strap if available.
• Verify connector orientation and seating before restoring power; do not force connectors.

This electronic control board governs the appliance's main functions and user interface, restoring normal operation when the original board fails. Replace a faulty control board to recover timed cycles, display responsiveness, and overall control reliability. What it does:

• Receives and processes user inputs from the console and controls cycle timing and sequences
• Sends signals to heaters, motors, valves, and relays to run the appliance properly
• Common symptoms: unresponsive buttons or display, erratic cycles, appliance won't start, or frequent error codes
• Replacing the board resolves failures tied to damaged circuitry or burnt components

• Disconnect power (unplug or shut off house circuit) before starting any repair
• Handle the board by its edges and avoid touching components; observe ESD precautions
• Verify the appliance model and part number match before ordering and installing

This electronic control board regulates oven functions and user interface, restoring consistent controls and cycle operation. It replaces a failed console module to help return accurate temperature control, timed cooking and display responsiveness. What it does:

• Reads user inputs and sends commands to bake/ broil/ convection elements and timers
• Manages oven temperature regulation by communicating with sensors and relays
• Restores display, touchpad or knob-responsive controls and cycle selection
• Resolves symptoms like unresponsive controls, incorrect cycle starts, or intermittent operation

• Disconnect power at the breaker before starting work to avoid shock
• Ground yourself and handle the board by edges to protect against static damage
• Minor disassembly of the console or back panel is typically required; retain all screws and connectors

This user interface control board replaces the oven's front control module so you can send commands and view settings. It restores responsive touch/buttons and proper display feedback for normal operation. What it does

• Receives button/touch inputs and relays commands to the oven control system
• Provides display/status feedback so settings and timers are visible
• Helps resolve unresponsive buttons, blank or incorrect display readouts, or intermittent control behavior
• Works as the main input surface for oven functions like bake, broil, timers, and temperature settings

• One user interface control board (UI board) — only items explicitly listed by the manufacturer are included

• Turn power to the appliance off at the breaker before servicing to avoid electrical shock
• Handle the board and connectors carefully; avoid touching contacts or flexing the board
• Verify connector orientation and secure mounting; test operation with power restored