Frigidaire Range / Cooktop / Oven Control Board

This clock timer is the control that displays the time and runs timed-cooking features. On models that use it as the main oven control, it also coordinates bake and broil. Replacing a failed unit restores reliable operation. What it does:

• Displays time-of-day and manages kitchen timer, delayed start, and cook duration functions
• On applicable models, controls oven heating by signaling bake/broil circuits to start and stop
• Common symptoms of failure: blank or dim display, inability to set clock/timer, oven won't start or shuts off unexpectedly

• 1 clock/timer control assembly

• Disconnect power at the breaker before servicing
• Access the control behind the console/control panel; label or photograph all wire connections
• Handle the board carefully to avoid static discharge and damage to terminals
• Transfer existing mounting brackets and any faceplate/overlay if your model uses them; secure and test operation before final reassembly

The Relay Board is an OEM part for Frigidaire ranges. It is an electronic component that controls the operation of various range functions and components by directing electrical currents through a network of relays.

Causes of a bad relay board include failure of electronic components over time due to continuous use, component fatigue, water damage, or surges/spikes in electrical current.

Symptoms of a bad range relay board include:

• Inoperable or unreliable oven/range functions such as bake, broil, warm, etc.
• Issues with cooktop burner ignition or flame level control
• Inconsistent or inaccurate temperature readings
• Error codes or diagnostic trouble codes appearing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This control board has been manufactured by Frigidaire for use with wall ovens.The control board manages the different heat and temperature functions of the oven, as well as contains the display components that show the temperature and time. If the display fails to light up or the user is unable to select the desired temperature, it's an indicator that this part needs to be immediately replaced. Make sure to disconnect the appliance from the power source or turn off the circuit breaker before beginning the repair process. Work gloves are also recommended.This is an authentic OEM part and as such is sold individually and made from durable, high-quality, non-corrosive materials. This control board is compatible with wall ovens that have been manufactured by Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and some other compatible brands.

This is the electronic clock/timer that controls the oven. It manages bake and broil functions and provides the display and timing, helping restore proper heating and responsive controls when the original board fails. What it does:

• Controls oven heating by sending power to the bake and broil circuits based on user selections
• Drives the clock, temperature, and status display
• Interfaces with the keypad to run timed baking and other oven functions
• Common failure symptoms can include no display, unresponsive buttons, error codes, or an oven that won't start or heat consistently

• Electronic control board (clock/timer) module

• Disconnect power at the breaker before servicing
• Access the control through the console/control panel; remove mounting screws to reach the board
• Label or photograph wiring and move connectors one at a time to the new board
• Handle by the edges to avoid static damage; secure all mounts and test operation after reassembly

This clock timer is the electronic oven control that governs timekeeping and oven functions. It displays the clock and settings and directs power to the bake/broil circuits so the oven responds to your commands.

• Controls and displays the clock, kitchen timer, and oven settings
• Sends power to bake and broil relays based on selected temperature and mode
• Coordinates preheat and cycle timing for consistent results
• Common signs it may be needed: blank or dim display, unresponsive buttons, error codes/beeping, oven won't start or heat though elements and power test good

• Disconnect power at the breaker before servicing—this is a high-voltage electronic part
• Access through the control panel or backguard; remove panel screws to reach the control
• Move wire connectors one at a time to the new control; reuse any mounting hardware
• Handle the board carefully to avoid static discharge; after installing, restore power and set the clock, then test oven functions

Restore reliable timekeeping and timed-cycle control with this Clock/Timer Kit. It replaces a failed clock/timer so you can set the time, run countdowns, and receive alerts as designed by the manufacturer. What it does

• Displays and keeps the appliance's current time
• Controls kitchen timer/countdown functions and audible alerts
• Interfaces with the appliance to manage timed cycles (start/stop)
• Helps resolve issues like blank or dim display, timer not advancing, drifting time, or unresponsive keys/knob

• 1 clock/timer kit assembly

• Disconnect power at the breaker before servicing; verify no voltage is present
• Access the control area; note screw locations and panel orientation
• Label or photograph wire locations; transfer connections one at a time to the new unit
• Mount securely, reassemble, restore power, and set the clock before testing timer functions

This clock timer is the electronic control that runs your range or wall oven's display, timer, and cooking functions. Replacing a failed control restores the clock/timer and reliable bake/broil operation when the display or controls stop working.

• Manages the clock, timer, and user interface; processes keypad/touchpad inputs
• Controls bake and broil elements via internal relays to reach and maintain set temperatures
• Coordinates preheat and temperature regulation using sensor feedback
• Common symptoms of failure: blank or erratic display, unresponsive buttons, oven won't start or heat, or unexpected error codes

• Disconnect power at the breaker before servicing; verify no voltage at the appliance
• Photograph/label wire connections and move harnesses one at a time to the new control
• Transfer any model-specific mounting hardware or faceplate as needed
• Handle the board by the edges and protect from static discharge

This electronic oven control board manages oven temperature, bake/broil functions, and the display/keypad. Replacing a failed board restores proper heating and responsive controls so the oven operates and times as it should. What it does:

• Regulates power to the bake/broil elements or gas valve to reach and maintain set temperature
• Interprets keypad inputs and controls oven modes (Bake, Broil, Start/Stop, Timer)
• Drives the digital display for time, temperature, and status
• Common symptoms of failure: no display, unresponsive buttons, oven won't heat or overheats, or recurring error beeps/codes

• 1 electronic control board assembly

• Disconnect power at the breaker; turn off gas supply for gas ranges
• Use ESD precautions; handle the board by its edges
• Label and transfer wire connectors one at a time; move any mounting hardware/overlay from the original, if required
• After installation, restore power, set the clock, and test oven modes

This replacement part is a genuine OEM frigidaire oven control board. The oven control board is the main circuit board that controls the ovens' essential functions. If the oven isn't heating properly, not turning on, or showing an error code on the digital display, it might be time to replace the control board. Replacing a control board may seem like a difficult task, but it is actually a relatively simple process. First, unplug the power to the stove. Move the appliance back to gain access to the back. Remove the upper back panel, and locate the control board. Take note of the order of the wires using a phone camera. Then detach the wire harness from the old control board. Remove any individual wires with needle-nose pliers. Then re-attach the wires to the new control board in the correct terminals. Snap the new control board into place and reinstall the upper back panel of the range.This replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand ovens.

This electronic control board regulates oven functions and the display, interpreting keypad inputs and controlling the bake and broil elements. Replacing a failed board restores responsive controls, accurate heating, and a readable clock/timer.

• Controls bake and broil element power using temperature sensor feedback
• Manages oven modes, timers, and the display/clock
• Interfaces with the keypad membrane to read user selections
• Failure symptoms can include no heat, oven won't start, erratic temperatures, or a dead/flickering display

• Disconnect power at the breaker before servicing to avoid electrical shock
• Handle the board by the edges; use ESD protection to prevent static damage
• Photograph wiring and transfer connectors one at a time to the new board
• Reuse existing mounting hardware and front overlay if applicable; correct orientation before securing

This electronic oven control board governs the appliance's heating and front-panel functions. Replacing a failed board can restore accurate temperature control, mode selection, and display/timer operation.

• Controls bake and broil relays to reach and maintain the set temperature
• Manages the oven clock, timer, and digital display
• Receives keypad inputs for mode and temperature selection
• Monitors the temperature sensor and can register fault codes
• Common symptoms: oven won't heat or start, blank/erratic display, unresponsive buttons, random beeps or error codes

• Disconnect power at the breaker before servicing
• Use ESD precautions; avoid touching circuitry and contacts
• Label or photograph all wiring; transfer mounting hardware and the existing faceplate/overlay if applicable
• After installation, run a test cycle; some models may require initialization or calibration per the service sheet in the unit

Clock Timer restores the oven's clock and countdown timer so you can time cooking and read the display. Replacing this assembly returns visible clock/timer functions for accurate bake and broil timing. What it does:

• Controls the oven clock display and countdown/count-up timer
• Enables timed cooking functions and visible timekeeping
• Commonly replaced when the display is blank, timer won't run, or timed cycles fail
• Works with the oven's front control interface and timing features

• Disconnect power to the appliance before starting any repair.
• May require removing the control panel or back panel to access connectors; handle the display and housing carefully.
• Match electrical connectors and mounting points before final assembly; do not force parts.

Replacement clock timer control that restores the oven/range clock display and basic timed-cooking functions. Ideal for appliances with a blank or unresponsive clock that need the timer and time-of-day features working again. What it does:

• Displays the current time and runs the oven/range timer and delay-start features.
• Manages timed cooking cycles (start/stop) and basic clock functions.
• Common replacement for a blank display, unresponsive buttons, or incorrect time/timer operation.

• Always disconnect power at the circuit breaker or unplug the appliance before servicing.
• Handle the display, glass, and electrical connectors carefully; avoid bending ribbon connectors or exposing the unit to moisture.

This genuine OEM part is a clock timer for ovens. The clock timer is the part of the oven that allows the user to set a time for cooking and baking. If the timer buttons are no longer responding to touch or the timer's digital display is no longer visible, it will need to be replaced. Luckily, replacing a timer is a fairly simple repair.To get started, make sure the range is unplugged. Once unplugged, pull the range out and away from the wall to gain access to the upper back panel. Remove the mounting screws to the panel to gain access to the back of the control panel. Locate the timer and proceed to unthread the screws that hold it in place. Once loosened, pull the timer out of its place and install the new timer by threading the mounting screws that secure it to the control panel. Reinstall the upper back panel and restore power to the appliance.This replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand ovens.

Electronic oven control board that manages the oven's functions and user interface, restoring temperature regulation and bake/broil cycles when the original control fails, helping return normal oven operation. What it does:

• Manages bake, broil and self-clean cycles and communicates with temperature sensors and relays.
• Replaces a failed control that can cause a blank or erratic display, incorrect temperatures, or an oven that won't heat.
• Helps resolve intermittent heating, unexpected shutoffs, and control-panel errors when the board is the root cause.
• Interfaces with the existing wiring harness and oven components to restore electronic control functions.

• Always disconnect power at the breaker before accessing or replacing the control board.
• Handle the board by the edges and avoid static discharge; ground yourself before touching electronics.
• Installation requires basic access to the oven's control cavity and may involve panel removal and reconnecting wiring harnesses.

Electronic clock/timer assembly that displays the time and manages timed cooking functions. Replaces a failed control clock to restore the clock readout, countdown timer and delay-start/timed-cook features. What it does:

• Displays current time and provides minute-timer/countdown functions used for timed cooking.
• Enables delay-start and timed-cook features when paired with the oven control.
• Common symptoms it fixes: blank or flickering display, clock not keeping time, timer not counting down, or unresponsive timer buttons.

• Disconnect power at the breaker before servicing to avoid shock.
• Access typically requires removing the control panel; handle the display lens and PCB carefully.
• Disconnect and reconnect the wiring harness by matching connector shapes; secure mounting screws before restoring power.
• After installation, set the clock and test timer/delay-start functions.