Need Help?
Call
Oven light not working or saw a flash near the bulb? This light socket houses the oven bulb and is a straightforward DIY fix in under 30 minutes.
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm! Read more
Replacement 6-inch chrome drip pan for electric range cooktops. Catches spills and protects your stovetop. Replace if rusted, cracked, or worn out.
Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed. Read more
Fix F99, F13 error codes, dead display, or non-working oven timer. This clock control board restores all timer and bake functions. DIY-friendly repair.
Replaced Oven Control Board. I already had removed the old part when I ordered the replacement. Part showed up in 48 hours. It took me about two minutes to install the new part. Tested to make sure it worked, then another 30 seconds to screw the back panel of the stove on. Read more
Dual element not heating or only outer ring works? This cooktop surface element fits both heating zones. DIY repair typically takes 15-30 minutes.
Ordered the dual element,only took 1 day for delivery,replaced element in about 15 min.and we're back in business Thanks Read more
Oven not heating or heating unevenly? This bake element restores proper temperature for consistent cooking. DIY-friendly installation in under an hour.
I ordered an element one day it was there the next day, that was quick. It fit perfectly in place Read more
Burner won't turn on or heat properly? This range burner control switch restores heat level adjustment. Moderate DIY with wiring terminal labels.
Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days... Read more
Burner orifice for gas ranges and cooktops. Controls gas flow to burner. Replace if cracked, corroded, or when converting between natural gas and propane.
Found the parts I needed ordered them from your site Received them and installed in a few minuets and was done Read more
Touch pad overlay for ranges and ovens. Covers the control board with buttons and display panel. Replace if cracked, peeling, faded, or worn out.
Replaced Oven control Board, I actually had a "professional" appliance repair man come to the house and tell me what was wrong with the oven. While he was standing in my kitchen, I noticed he pulled up the AppliancePartsPros.com website to quote me the pricing for the parts. I did not see it necessary to pay him the marked up price. He left the house without repairing the oven I proceeded to order the parts that same evening, replaced the bad parts the same day I received them. I noticed while... Read more
The Stove Top Burner is an OEM part for Frigidaire cooktops and ranges. It is designed to provide consistent and reliable heat for cooking on the stovetop. This burner ensures even heat distribution, allowing for efficient cooking and precise temperature control.
Over time, stove top burners can become faulty due to various reasons. Causes of a bad stove top burner can include wear and tear from regular use, accumulation of food residue or grease, or damage from impact. These factors can lead to inconsistent heating or the burner failing to ignite.
Symptoms of a bad stove top burner include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Bought new burner tops for all four burners. Lights great now with nice blue flames and no yellow. Read more
This electronic control board manages oven functions including temperature regulation, bake/broil cycles, and the clock display. It mounts behind the control panel and communicates with the oven's heating elements and sensors. Replace this board if the oven won't heat, displays error codes, has a blank or flickering display, or if the clock and timer stop working correctly.
After finding or oven no longer heated, we found that the clock/time (controller) board had failed and fused one lead of the wiring harness to the board. We replaced the board and entire wiring harness. Took about an hour to match the direct fit wiring harness and mount the new board. The job wasn't difficult just a little time consuming. Read more
Fix F95 error code or oven door that won't lock during self-clean cycle. This door lock motor assembly repair takes about 15 minutes with basic tools.
I replaced the controller to remedy the LED display issue and changed the motor latch assembly to fix the F95 error. The installation of both parts was very easy. A local repair shop wanted a minimum of $115 just to show-up at my door, and their price for the same parts was over $140 what I paid at AppliancePartsPros. Thanks. Read more
Burner won't spark or ignite? This cooktop igniter electrode creates the spark needed to light gas burners. Simple DIY fix in under 30 minutes.
This is a Montgomery Ward gas range made by Tappan. Parts are no longer offered for this appliance. So, I had to eyeball various ignitors to determine which one would work. I settled on the least expensive one and ordered two (Just in case there were "issues"). The parts arrived quickly but were not a simple drop-in replacement. The new ones were longer and smaller in diameter. I had to use the original bracket because it provided the electrical ground for the spark. I used a spring to... Read more
Oven burns food or won't reach set temperature? The oven thermostat regulates heat by cycling elements on and off. DIY repair takes about 15 minutes.
Ordered a new thermostat from you one day, got it the next day, installed it in about 15 minutes,and got excellent results. Read more
Replacement gas burner for ranges and cooktops. Restores even flame distribution when original is clogged, damaged, or worn from boilovers and daily use.
Replaced the part and it works great. Thanks! Read more
Gas burners won't ignite? A faulty spark module may be the issue. This part sends electrical current to igniters. DIY-friendly, takes minutes.
Watched repair video's to learn where parts were located. Put replacement in and it worked great! Read more
Burner won't heat evenly or only outer ring works? This dual 9/12 inch radiant surface element restores proper heating. Easy DIY replacement in minutes.
Replace element. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.