General Electric Cooktop Grate, Grate Feet, Griddle

This surface burner grate supports cookware over the flame on a gas cooktop or range, providing a stable, level surface for cooking. Replace a cracked or warped grate to restore safe pan support and consistent heating.

• Supports pots and pans at the correct height over the burner
• Provides stable, level placement to promote even heating
• Replaces grates that are cracked, chipped, or warped
• Common signs: wobbling cookware, uneven cooking, or a grate that no longer sits flat

• Turn off all burners and allow the cooktop to cool completely
• Lift off the old grate; clean the area beneath as needed
• Place the new grate, ensuring it seats properly and rests flat on all contact points
• Verify pan stability before lighting a burner

The Burner Grate is an OEM part for GE gas ranges. This component supports cookware above the burner, allowing for even heating and stable placement of pots and pans during cooking. 

Causes of a bad burner grate can include prolonged exposure to high heat, accidental dropping or impact, or wear and tear from frequent use. A damaged grate can affect cooking efficiency and safety by causing instability for cookware.

Symptoms of a bad burner grate include:

• Cracks or chips in the grate
• Uneven or unstable cooking surface
• Rust or discoloration
• Difficulty in placing pots and pans securely

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Ranges and ovens have grate feet installed on the underside of their cooktop grates. This rubber piece keeps the stovetop from getting scratched by the grate when there is pressure applied. With use, misplacement, or other damages, there is a requirement for one more replacement grate foot pieces.A stovetop with scratches on the surface indicates a missing grate foot. There are four grate foot parts on each grate. The replacement of a grate foot is a simple process. Remove the grate covering the area where a visual inspection has determined there is a missing foot grate. Clean the area thoroughly. Apply the new foot grate. Reposition the grate on the stovetop. Wear gloves for safety. It's recommended to unplug the appliance while doing the replacement to prevent accidental activation of the cooktop.This grate foot is an authentic OEM replacement part. It is sold as an individual unit. It is made of high-quality, durable rubber. The piece is sourced directly from the manufacturer. It is compatible with several models of ranges and cooktops. The grate foot fits in appliances produced by General Electric, RCA, and Hotpoint.

This burner grates provide a stable surface on which to balance cookware and keep it squarely over the top of the flame on a gas range. This particular set includes all of the grates required to cover the burners on compatible range models. Over time, burner grates might become worn, dented, bent, corroded, or simply too damaged or dirty to use. No tools are needed to replace this part. Remove the old grates and slot the new ones into place. This part is a genuine OEM replacement burner grate set intended for use with gas range models. This part has been made by General Electric and has been sourced directly from the manufacturer. This part is made out of high-quality, durable, non-corrosive metal to ensure durability. This burner grate set is sold individually. It is intended for use with gas ranges manufactured by General Electric, Hotpoint, RCA, and other brands.

This replacement burner grate assembly restores a stable, level cooking surface so your cookware sits securely over the burners. Replace a worn, cracked, or missing grate to improve safety and everyday cooking performance.

• Supports pots and pans at the correct height over the flame for consistent heating
• Keeps cookware stable to help prevent rocking or tipping
• Replaces damaged, warped, or broken grates that can compromise results
• Refreshes the cooktop's appearance after heavy wear or discoloration

• Allow the cooktop and old grate to cool completely before handling
• Lift off the old grate and clean the support area of spills or debris
• Set the new grate in place, aligning feet/locator tabs so it sits flat without wobble
• Avoid dropping or sliding the grate to prevent chipping or surface scratches

Color: Gray.

This grate assembly replaces a damaged or missing cooktop grate to restore a stable cooking surface and proper burner support. It fits into the cooktop top and supports cookware for safe, even heating. What it does:

• Provides a stable platform for pots and pans over the burner
• Replaces cracked, warped, or chipped grates that cause instability
• Reduces rattling or movement of cookware during use
• Helps maintain proper clearance and airflow around the burner

• Disconnect electrical power and shut off gas (if applicable) before servicing.
• Handle enamel-coated grates carefully to avoid chipping; do not use abrasive cleaners.

Double. Right hand side

Cooktop grate assembly that supports cookware over gas burners, restoring a stable, level cooking surface and proper burner contact. Replaces damaged or warped grates to help reduce wobbling and improve cooking consistency. What it does:

• Provides a stable platform for pots and pans above gas burners
• Positions cookware for correct flame contact and more even heating
• Replaces cracked, chipped, or warped grates that can cause wobbling or unstable cookware
• Helps prevent pans from tipping and keeps the cooktop surface functioning as intended

• Allow the range and burners to cool completely before removing or installing the grate
• Typically installs by lifting the old grate off and seating the replacement into place—no special tools required
• Verify correct seating around the burner caps so flames are not obstructed

This replacement cooktop grate assembly restores a stable cooking surface for gas ranges, letting cookware sit level and burners operate safely. It replaces damaged or worn grates to help prevent pans from wobbling and improve usability. What it does:

• Supports pots and pans securely over the burner for safer cooking
• Replaces cracked, chipped, or warped grates that cause instability
• Helps burners and cookware align properly for consistent heat contact
• Restores the cooktop's original appearance and functionality

• Turn off the appliance and allow the cooktop to cool completely before handling
• Lift out the old grate and set the new grate into place; ensure it seats flat and stable
• No wiring or gas-line disconnection is required for grate replacement

Please note: These are a dark grey replacing light grey

This gas burner grate supports cookware on a gas cooktop, restoring stable, level support for safer, more consistent cooking. It replaces a cracked, warped or missing grate so pots and pans sit securely over the burner. What it does:

• Provides a stable surface for cookware so pans sit level over the flame.
• Helps maintain consistent heat contact for more even cooking.
• Replaces broken, chipped, warped or missing grates that cause wobbling or uneven heating.
• Designed to fit the designated cooktop burner location for correct alignment.

• Allow the cooktop to cool and turn all controls to OFF before replacing the grate.
• Remove the old grate and set the new grate into position—no tools are typically required.
• Inspect surrounding burner caps and ignitors; do not operate burners if any components are damaged.
• If you smell gas or suspect a leak, shut off the gas supply.

Color: Gray.

Qty: 1 (order quantity needed)

This center cooktop grate replaces a damaged or missing center grate to restore stable support for cookware and proper burner coverage. It helps keep pots and pans level and protects the burner area for even cooking. What it does:

• Provides a stable, centered cooking surface over the cooktop burners
• Keeps cookware properly positioned for consistent heating and flame coverage
• Replaces cracked, chipped, or warped grates that cause wobbling or uneven cooking
• Helps prevent cookware from contacting the burner cap or igniter

• One center cooktop grate

• Ensure the range is completely cool and all controls are off before handling
• Remove the old grate by lifting straight up; set the new grate into place so it seats flat
• No tools are typically required; inspect for proper alignment before use
• Clean with mild detergent and avoid abrasive cleaners that can damage the finish