General Electric Cooktop Gas Conv Kit Parts

LP gas. SM .63mm

This LP orifice spud meters gas to a range burner when using liquid propane. Replacing a worn or incorrect jet helps restore proper flame size and clean combustion during LP setup or conversion.

• Meters LP gas to the burner for correct flame height and color
• Helps resolve large yellow flames, soot, and poor simmering caused by an incorrect/blocked spud
• Supports safe operation when converting from natural gas to LP per the manufacturer's instructions
• Can improve ignition and flame stability when the original jet is damaged or clogged

• Disconnect power and shut off the gas supply; allow the appliance to cool before servicing
• Remove the existing spud with the correct wrench and install the replacement snugly—do not overtighten
• Perform any required air-shutter/burner adjustments per the service instructions
• After installation, leak-check with a soapy water solution; LP conversions should comply with local codes

Liquid propane. Simmer burner

Liquid propane. Main burner.

This LP orifice spud directs propane gas to a burner for correct flame size and stable cooking heat. It's the specific replacement used in LP-configured gas cooktop/oven burners to restore proper gas flow. What it does:

• Meters propane flow to a burner for consistent flame performance.
• Used in LP (propane) conversions or LP-configured burners.
• Common symptoms it can fix: burner won't light, weak or uneven flame, or poor heat control.
• Fits into the burner valve/manifold assembly and works with the burner head.

• Turn off the gas supply and disconnect power to the appliance before servicing.
• Use correct LP conversion instructions for your appliance and replace only with the specified orifice for LP.
• Hand-start threads, then snug with the appropriate wrench; avoid over-tightening.

Natural gas

Natural gas

Natural gas. Simmer burner

Natural gas

18K

Liquid propane

Natural gas. Main burner.

Natural gas. LG 1.68mm

This air shutter controls the air-to-gas mixture for a range/oven burner to help produce a proper flame for efficient cooking and reliable ignition. It's a simple replacement part that restores correct airflow at the burner inlet. What it does:

• Regulates burner airflow to help achieve a stable, properly-colored flame
• Helps correct weak, uneven, or yellow-tipped flames when misaligned or damaged
• Supports consistent ignition and steady burner performance
• Works at the burner/orifice connection to fine-tune combustion air

• Turn off gas supply and electrical power to the appliance before servicing
• Remove burner components as needed to access and replace the shutter; retain screws or clips
• Position the shutter per OEM orientation and secure; do not overtighten fasteners

This orifice hood directs and stabilizes the natural gas flow to a single range/oven burner for reliable combustion and consistent heat. It helps restore proper burner performance when the hood is damaged or worn. What it does:

• Guides natural gas from the orifice to the burner for steady flame and efficient combustion
• Commonly used when burners have weak, uneven, or unstable flames
• Can resolve ignition problems tied to damaged or misshapen hoods
• Supports correct flame shape to reduce yellow tipping or sooting

• Turn off gas supply and electrical power before servicing; follow local codes
• Install on the burner tube/orifice assembly as shown in your service manual
• Inspect surrounding fittings and gaskets; replace any damaged components
• After installation, check for gas leaks and proper burner operation