General Electric Cooktop Lens & Related Parts

This indicator light lens covers the control-panel lamp opening, diffusing the light and protecting the hole from debris and contact. Replace a missing or damaged lens to restore a clean, finished look and clear on/off indication.

• Provides a finished cover for the indicator lamp opening on the panel
• Diffuses the light for clearer visibility
• Shields the opening from dust, moisture, and accidental contact
• Common signs to replace: lens is cracked, missing, discolored, or won't stay seated

• Disconnect power at the breaker before servicing
• Access the control panel as required for your model (remove knobs/screws if needed)
• Lens typically snaps in; some models use a rear retainer—transfer any clip or seal
• Align with the lamp and press evenly; do not force or overtighten fasteners

This indicator light cover is the protective lens for the status light on a range or cooktop. It shields the opening and diffuses the light so on/hot indications stay visible while helping keep dust and moisture out.

• Protects the indicator opening and retains the light assembly in the control panel
• Diffuses the light for clear on/hot visibility
• Restores a finished look and helps keep debris and moisture out of the panel
• Replace if the lens is cracked, discolored, loose, or missing

• Disconnect power to the appliance before servicing
• Access the control panel, release the old cover's retaining tabs, and remove
• Seat the new cover fully so tabs engage; transfer any clip/gasket from the original if present
• Restore power and verify the indicator light is clearly visible and the cover is secure

This part is the lens for a small appliance light on select GE cooking products. It covers and diffuses the lamp, protecting the opening and restoring a clean, finished appearance so status illumination is easy to see.

• Covers and diffuses a panel/indicator light so it's visible without glare
• Helps shield the lamp cavity from grease, moisture, and debris
• Restores proper appearance if the original lens is cracked, missing, or discolored
• Common symptoms: missing or broken lens, cloudy/yellowed lens, exposed indicator lamp

• Disconnect power to the appliance before servicing
• Access the lens from the rear of the panel or mounting area; release retaining tabs or hardware
• Seat the new lens fully and align any tabs before securing
• Restore power and verify the indicator light shines through clearly

This indicator light replaces a failed pilot light on a range or cooktop. Mounted in the control area, it illuminates to show when a burner or function is on, restoring clear visual status and everyday safety.

• Lights when the associated heating element or oven function is active
• Provides a visible "on" cue to help prevent accidental contact
• Common symptoms: won't light, flickers/intermittent, or stays on when controls are off
• Restores proper visual feedback when the original light has failed

• Disconnect power at the breaker or unplug the appliance before servicing
• Access the rear of the control panel; remove back cover/trim as needed
• Note wire positions and transfer them to the new light one at a time
• Seat the light securely and reuse existing mounting hardware; ensure wires are not pinched

Control-panel indicator light that signals power or heating status on select ranges and ovens. Replaces a failed or cracked panel lamp to restore visible status feedback from the appliance. What it does:

• Illuminates to show power, element or status indications on the appliance control panel.
• Replaces a burnt-out or dim indicator so you can see when functions are active.
• Common symptoms this part fixes: no indicator light, flickering/dim illumination, or a cracked/ cloudy lens.
• Matches the original panel lamp form and mounting for a direct replacement.

• Disconnect power to the appliance (unplug or shut off the breaker) before beginning any service.
• Allow surfaces to cool completely before removing the control panel or handling the lamp.
• Follow the appliance disassembly steps in the service manual; avoid forcing connectors or wiring.

A light indicator is installed on ranges and wall ovens as a safety feature. The purpose of the light indicator is to tell the user when the appliance is in operation. When the unit is heating up or running, the light indicator will illuminate. A replacement part is necessary if the component is no longer functioning.A visual inspection will determine if the light indicator is working. Turn the oven on, and if the light doesn't glow, it's broken. Replacing the light indicator is a quick and easy process. Unplug the range from its power source before starting. An adjustable wrench or nut driver is required to make the replacement. The light indicator is located inside the cover plate of the appliance.This light indicator is an authentic OEM replacement part. It is sold as an individual unit. It comes sourced directly from the manufacturer. The light indicator is made of durable, high-quality materials. The component is compatible with several models of ranges. It fits into products produced by General Electric, RCA, and Hotpoint.

This LED board is the refrigerator interior light assembly that restores bright, even illumination inside the fresh-food compartment for easier visibility and safer food access. What it does

• Powers and distributes LED light to illuminate the refrigerator interior
• Replaces a failed or dimming light board to stop flicker or complete loss of interior lighting
• Ensures even light coverage across the compartment for better visibility
• Works with the refrigerator's existing light housing and connectors to restore normal operation

• One LED board

• Disconnect power to the appliance before starting any work
• Handle the board by its edges and avoid touching LED components or circuitry
• Remove shelves and trim as needed to access the light housing; keep track of screws and retainers
• Reconnect all wiring and verify proper operation before reassembling the compartment

This LED light assembly replaces a failed or damaged interior refrigerator light to restore bright, energy-efficient illumination inside the fresh-food compartment. It mounts in the light housing and connects to the factory wiring harness. What it does:

• Replaces burned-out or broken interior LED lighting
• Restores consistent, flicker-free illumination when the door is opened
• Helps you see foods and settings clearly on shelves and door bins
• Works with the factory light housing and wiring for a direct replacement

• Disconnect power to the appliance before beginning any work to avoid electric shock.
• Handle the LED assembly and connectors carefully; avoid touching LED surfaces or exposing contacts to moisture.
• Some installations require removing the light housing or interior trim; keep fasteners organized for reassembly.
• If mounting screws, brackets, or clips are not obvious, refer to the appliance's parts diagram or service manual to identify the correct removal order.

A direct-replacement light indicator assembly that restores the control panel's visual status cues so you can see power and cycle indicators clearly. Fits into the control panel to signal key functions. What it does:

• Lights the control panel so you can confirm power or cycle status at a glance
• Replaces a cracked, dim, or non-functioning indicator lens and lamp assembly
• Helps resolve intermittent or no-light symptoms from the affected indicator
• Provides the proper fit and alignment for consistent illumination

• One light indicator assembly

• Disconnect power to the appliance before attempting any service
• Remove the control panel or access panel per the service manual to reach the assembly
• Handle the lens and lamp carefully to avoid damage; use basic hand tools

This lens bezel covers and protects the appliance's front control panel, keeping buttons and displays visible while shielding them from spills and wear. It restores the appearance and function of the control area for a clean, readable interface. What it does:

• Protects the control panel lens and underlying electronics from splashes, spills, and everyday wear
• Provides a clear viewing surface for display readouts and button labels
• Helps keep button/dial areas aligned and prevents debris from entering gaps
• Restores a worn, cracked, or scratched control area to improve usability and appearance

• One lens bezel

• Remove power to the appliance before beginning any work to avoid shock or injury
• Typically secures with clips or screws; handle the lens gently to avoid cracking
• Inspect surrounding trim and gaskets during reassembly; replace damaged fasteners as needed