General Electric Range Gas Conv Kit Parts

This replacement high-altitude natural gas orifice helps restore correct gas flow for burners in higher-elevation installations, improving ignition consistency and flame stability compared with an incorrect or worn orifice. What it does:

• Regulates natural gas flow for proper burner operation at higher elevations
• Helps reduce weak or uneven flames and ignition difficulty caused by altitude-related gas pressure differences
• Used where an adjusted orifice is required instead of standard sea-level orifices
• Designed to work with specified OEM gas valve/burner assemblies

• Turn off gas supply and electrical power before servicing; follow all local codes
• Install only in the specified orifice location and orientation; do not force or modify the part
• Check for gas leaks after installation and restore power only after confirming safe operation

This right rear burner tube assembly routes gas from the manifold to the right-rear burner on compatible gas ranges, restoring proper fuel flow and stable burner operation. What it does:

• Directs gas to the right-rear surface burner so the burner can light and maintain a steady flame
• Replaces a bent, clogged, or corroded tube that can cause weak or uneven flames
• Helps eliminate burner misfires or no-light conditions when tube damage or obstruction is the cause
• When damaged or loose, can contribute to gas odor or leaking — replacing a compromised tube restores safe, correct routing

• Turn off the range's gas supply and electrical power before beginning work
• Verify correct tube alignment on the manifold and burner adapter; avoid overtightening fittings
• Check for gas leaks after installation using a soap-and-water solution or a gas leak detector

Location: Right front.

Natural gas

This orifice holder secures the burner orifice for the right-rear cooktop burner, restoring correct gas flow for consistent ignition and flame performance. Use when a burner shows weak flame, uneven heating, or fails to light. What it does:

• Holds the gas orifice in the correct position under the burner for stable flame shape and output
• Helps restore reliable ignition and consistent burner heat when the orifice or mount is damaged or loose
• Prevents misalignment that can cause sputtering, low flame, or burner blowouts
• Works with the burner head and cap as part of the gas delivery assembly

• One right-rear orifice holder

• Turn off gas supply and electrical power to the appliance before servicing
• Remove burner cap and head to access the orifice holder; replacement typically requires basic hand tools
• Reinstall carefully and check for proper alignment; after reassembly, check for gas leaks with a leak-detection solution (do not use an open flame)

This gas conversion kit provides the parts needed to convert a compatible gas range between fuel types so the appliance can operate safely after a fuel change. It's a simple replacement kit for restoring proper burner operation. What it does:

• Supplies the necessary conversion components to change a range's gas configuration
• Helps ensure correct gas flow and burner ignition after conversion
• Addresses issues caused by using the wrong fuel type, such as poor burner performance or difficulty lighting
• Works as part of a proper conversion process performed to match the appliance to the household gas supply

• Installation should follow the appliance OEM conversion instructions exactly.
• Turn off the gas supply and disconnect power before beginning work.
• After conversion, check all fittings for leaks and test burners for correct operation.

This tube and orifice assembly delivers regulated gas from the supply line to a range/oven burner so the appliance lights and maintains a steady flame. It restores correct fuel flow for safe, consistent heating. What it does:

• Directs gas from the manifold to the burner through a precisely sized orifice for proper flame shape and heat
• Helps fix weak or uneven flames, burners that won't ignite, or burners that barely stay lit
• Used when the existing tube is damaged, bent, clogged, or the orifice is worn or incorrect
• Works with the appliance's factory gas system to maintain proper combustion when correctly installed

• One tube and orifice assembly

• Turn off gas supply and power to the appliance before starting work
• Use proper tools and fittings; verify correct orientation and seating of the orifice and tube
• After installation, perform a leak test and observe burner ignition and flame pattern

This orifice spud directs natural gas from the valve to the burner, restoring proper flame shape and more consistent heat on compatible gas ranges and cooktops. Replace when the burner flame is weak or uneven. What it does:

• Channels natural gas into the burner orifice to create a steady, correct flame.
• Replaces a worn, clogged, or damaged spud that can cause low, sputtering, or uneven flames.
• Helps restore reliable ignition and more consistent cooking temperatures.
• Designed specifically for natural gas (NG) systems — do not interchange with LP parts.

• Turn off the appliance power and shut off the gas supply before beginning work.
• After installation, check all connections for leaks and test each burner for proper flame and ignition.

This LP/NAT conversion kit contains the orifice spuds and instructions needed to convert a compatible gas range or oven between liquid propane (LP) and natural gas so burners operate with the correct fuel flow and combustion. What it does:

• Replaces factory orifice spuds to match the appliance to LP or natural gas
• Restores proper burner flame size and performance after conversion
• Helps prevent incomplete combustion caused by incorrect orifice sizing
• Use when appliance was shipped for a different fuel type or after regulator changes

• Turn off gas supply and electricity before servicing; leak-test all connections after installation
• Follow the appliance's service manual and conversion instructions exactly
• Use the correct orifice(s) for your fuel type
• Retain removed parts and documentation for warranty and service records