General Electric Wall Oven Parts

This oven door gasket forms the heat-sealing seal around the oven door to help keep heat and cooking odors in the oven cavity for more even cooking. It replaces worn, torn, or deformed seals to improve oven performance. What it does:

• Seals the oven door to reduce heat loss and help maintain consistent cooking temperatures.
• Helps prevent smoke or odors from escaping the oven cavity during use.
• Reduces energy waste caused by oven heat leaking around the door.
• Commonly replaced when the gasket is cracked, compressed, burnt, or shows visible gaps.

• One oven door gasket as shown.

• Remove power to the appliance and allow the oven to fully cool before servicing.
• Inspect the gasket channel and clean debris before installing the new gasket for a proper seat.
• Press the gasket into the door channel, working around the perimeter to ensure an even fit; some gaskets may be secured with clips or adhesive—follow the oven's service instructions.

This lower bake element assembly heats the oven cavity for baking and roasting so you can cook food evenly. It replaces a damaged or failed lower heating element to restore normal oven heating performance. What it does:

• Produces the oven's lower radiant heat used during bake cycles
• Common fix when the oven won't reach or hold set temperature
• Replaces elements that are visibly burned, broken, or arcing
• Helps correct uneven baking when the lower element is not working

• Disconnect power to the appliance at the circuit breaker before servicing
• Allow the oven to cool completely; handle the element carefully to avoid damage
• Inspect wiring and connectors for heat damage and secure connections during installation
• After installation, restore power and run a short bake cycle to verify correct operation

This clip retainer secures the oven door glass to the door frame to keep the glass stable during use and prevent rattling or separation. Simple replacement restores proper glass alignment and reduces vibration noise. What it does:

• Holds the inner door glass in position inside the oven door assembly.
• Prevents the glass from shifting, rattling, or contacting other door parts.
• Helps maintain a safe, stable door assembly after a cracked or missing clip.
• Commonly replaced when the glass feels loose or the door vibrates during operation.

• One clip retainer for door glass.

• Disconnect power to the appliance before starting and allow the door to cool completely.
• Remove the oven door per the manufacturer instructions and handle glass with care — support both pieces of glass when separating.
• Use basic hand tools; keep track of screws and any spacers removed.

This spacer reinforcement assembly provides a reinforced support bracket that helps maintain proper component alignment and structural integrity in the appliance. It restores secure mounting where the original spacer or support has failed. What it does:

• Adds structural support to the appliance frame or mounting area to prevent sagging or misalignment
• Stabilizes adjoining parts to reduce vibration and rattling during operation
• Restores correct spacing to ensure panels and components fit flush
• Helps eliminate gaps that can cause rubbing or premature wear

• Disconnect power before starting any repair; follow all safety precautions.
• Basic hand tools are typically required; inspect associated fasteners and replace if damaged.
• Align part carefully before tightening to ensure proper fit and function.

The Control Oven (ERC3DD) is an OEM replacement part for GE ranges. As the central electronic control board, it facilitates operation of all oven features through buttons on the control panel.

Symptoms of a bad control can include:

• Buttons or displays not functioning properly
• Inability to select bake, broil or other cooking options  
• Door lock malfunctioning 
• Temperature not reaching desired set point
• Control panel not responding to input

Causes may relate to component failures over time or damage from water, voltage fluctuations, or other electrical issues. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A replacement frame board assembly that secures the oven/range control console and gives the control area a finished appearance. Restores proper mounting and protection for the control electronics so buttons and displays sit correctly. What it does

• Provides the structural frame and mounting surface for the range/oven control console and control board.
• Protects control electronics and wiring from exposure and interference.
• Keeps front control buttons, switches and displays aligned and stable.
• Restores the unit's finished appearance when the original frame is cracked, bent or broken.

• Disconnect power to the appliance before starting work to prevent shock or damage.
• Handle sharp sheet-metal edges carefully and keep small fasteners organized for reassembly.
• Some disassembly of the backguard or control console may be required to access mounting screws.

This fan assembly replaces the appliance's failed air-circulating fan to restore proper airflow and help maintain consistent temperatures. It's a direct-fit replacement designed for straightforward swapping of a worn or noisy fan. What it does:

• Circulates air across internal components to support cooling or ventilation
• Replaces fans that are noisy, wobbling, seized, or not spinning
• Helps resolve symptoms like poor cooling, uneven temperatures, or abnormal fan noise
• Prevents further stress on compressor and other components by restoring airflow

• One fan assembly

• Disconnect power to the appliance before beginning any work
• Access typically requires removing an access panel; keep track of fasteners and wire routing
• Avoid contact with sharp sheet metal and moving blades; wear gloves and eye protection

This retainer bolt fastens and secures internal appliance components to keep panels and assemblies stable during operation. It's a direct-fit replacement designed to restore proper hold and reduce looseness or vibration. What it does:

• Secures appliance parts and assemblies in place to prevent movement during use
• Restores proper alignment of panels or components that become loose
• Functions as a hardware fastener where the original retainer bolt was used

• One retainer bolt

• Disconnect power and, if applicable, gas supply before starting any repair
• Start threads by hand to avoid cross-threading; tighten with appropriate hand tools
• Do not overtighten—secure snugly to avoid stripping threads or damaging components

This air divider directs and controls airflow inside the refrigerator to help maintain even temperatures between compartments and reduce frost buildup on shelves and drawers. What it does:

• Guides chilled air through the cabinet to balance temperatures across compartments
• Helps prevent cold spots and excessive frost near vents and shelves
• Supports proper circulation after evaporator airflow is restricted or misdirected
• Common symptom: uneven cooling or noticeable temperature difference between sections

• One air divider

• Disconnect power to the appliance before beginning any work
• Remove shelves or drawers as needed for access; handle plastic parts gently to avoid cracking
• Align tabs and snap the divider into the existing slots; no special tools typically required
• If airflow issues persist after replacement, check vents, damper, and fan for related faults