General Electric Wall Oven Parts

The Control Board is an OEM part for GE ovens. As the central control unit, the control board monitors and regulates critical cooking functions such as temperature settings, timers and safety features.

Causes of a bad control board can be normal wear and tear over time, exposure to heat and moisture leading to corrosion of electronic components, or accidental damage.

Symptoms of a bad control board include:

• Unresponsive control panel or dim/missing display
• Inability to select bake or broil temperatures
• Failure to preheat or maintain proper temperatures
• Safety sensors not functioning correctly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This relay board assembly switches household power to heating elements and other high-current circuits, restoring proper operation to ranges and ovens that fail to energize components. It replaces a failed relay module to help appliances heat reliably. What it does:

• Acts as the high-current switching relay for oven/range heating circuits
• Routes power to elements/igniters when the control tells it to
• Commonly linked to symptoms like no heat, intermittent heating, or clicking from the control area
• Replaces a failed relay to stop arcing or loss of power to heating components

• Disconnect power at the breaker or unplug the appliance before servicing
• Verify the part number and connector orientation before removing the old board
• Handle the board carefully to avoid bending pins or damaging terminals

This control panel assembly replaces a damaged or unresponsive console to restore your appliance's front-user controls and button feedback. It provides the interface that sends user commands to the appliance's control electronics. What it does:

• Houses the front buttons/touch pads and status indicators used to select cycles and settings
• Transmits user inputs to the main control so the unit will start and change settings
• Commonly replaces panels that are cracked, worn, or have non-responsive buttons
• Can resolve issues where button presses do not register or the control surface is cosmetically damaged

• Control panel assembly (1)

• Disconnect power before beginning service to avoid shock or damage
• Replace with the exact part number shown on the old panel; handle the assembly carefully to avoid scratching or bending
• Minor disassembly of the top/front trim and electrical connector removal are typically required; reinstall all fasteners and connectors securely

Left hand side. For right hand use WB14K5006

This lower cooling fan assembly circulates air to cool internal components and help maintain proper airflow in the appliance. Replacing a worn fan restores quieter operation and helps prevent overheating of electrical parts. What it does:

• Moves air through the appliance cabinet to aid component cooling and temperature regulation.
• Reduces hot spots around controls, electronics, and motors that can cause premature failure.
• Commonly used when you hear unusual noise from the lower area or detect reduced airflow.
• Supports overall appliance performance and reliability by maintaining designed ventilation.

• One lower cooling fan assembly as shown

• Disconnect power before attempting any service to avoid electric shock.
• Inspect surrounding mounts and ducts for damage; replace any broken clips or supports.
• Use basic hand tools; confirm correct orientation and secure mounting before restoring power.

This electronic range control (ERC3HP) regulates oven functions like bake, broil and timed cooking so your range responds correctly to temperature and timer settings. Fits as the direct replacement control board for affected oven models. What it does:

• Manages oven user interface commands and internal relay switching for bake, broil and convection cycles
• Controls oven temperature regulation and displays time/clock functions
• Enables timed bake, delay start and other programmed cooking features
• Can resolve symptoms such as non-heating bake/broil cycles, unresponsive front controls, or erratic temperature behavior

• Disconnect power at the breaker before accessing internal components to avoid shock
• Handle the control board by its edges; avoid touching circuitry or connector pins
• Verify connector orientation and secure all wire harnesses before restoring power

This spacer is a small mounting shim used to position and support components inside the appliance for correct alignment and stable operation. It helps maintain part clearance and keeps assemblies seated where intended. What it does:

• Provides spacing between panels or components to ensure proper alignment
• Helps prevent rubbing, binding, or misalignment of moving parts
• Can reduce vibration or noise caused by improperly seated parts
• Useful when replacing or reinstalling components that require precise clearance

• Disconnect power before accessing internal components
• Use basic hand tools; keep track of fasteners and original part locations
• Replace only with the same spacer size and orientation for correct fit

This control panel assembly replaces the oven's electronic console to restore keypad input and display functions, letting you set cook times, temperatures and modes from the front console. What it does:

• Houses the touchpads/buttons and display used to control oven functions
• Sends user commands to the oven control board so settings are registered
• Commonly replaced for unresponsive buttons, blank or garbled display, or cracked/damaged front panel
• Restores normal front-panel operation without replacing the main control board

• One control panel assembly (electronic console) as shown

• Disconnect power to the appliance at the breaker before starting work
• Handle the assembly carefully to avoid damaging the display, ribbon cables or connectors
• Basic hand tools typically required; some disassembly of the outer door/console may be needed

This bottom trim is a replacement lower front finishing piece that restores the appliance's appearance and helps keep the kickplate area protected from dirt and damage. Fits where the original lower trim is cracked, chipped, or missing. What it does

• Covers the refrigerator/oven lower front to restore a finished look and hide internal components
• Protects the kickplate area from scuffs, dirt, and light impacts
• Replaces cracked, broken, warped, or faded trim that affects appearance
• Matches white finish for seamless visual restoration

• Disconnect power to the appliance before beginning work
• Typically installs with existing screws or clips after removing the toe/kick grille
• Handle the part carefully to avoid scratching the finish during installation

This lock lever is the replacement latch arm that engages the oven door lock mechanism so the door secures during self-clean cycles and normal operation. It restores proper door engagement and helps the oven door lock and latch reliably. What it does:

• Moves the latch assembly to secure the door when the lock engages
• Prevents the door from opening during self-clean or locked states
• Common symptom: oven won't enter or complete self-clean because door won't lock
• Common symptom: door feels loose, won't latch, or makes scraping/obstructed noises when closing

• Disconnect power to the appliance before starting any repair
• Access may require removing the oven door or control/front panel; follow OEM instructions
• Handle near edges and glass carefully; use proper tools and keep small fasteners secure

This outer oven door glass restores the oven door's exterior appearance and helps contain heat in the oven cavity for more consistent cooking. It fits the outer pane position and replaces cracked, chipped, or cloudy glass. What it does:

• Replaces damaged or broken outer oven door glass to restore door integrity and appearance
• Helps maintain oven cavity heat for consistent cooking performance
• Prevents drafts and reduces heat loss from a compromised door seal area
• Reduces the risk of glass-related safety issues like cuts from cracked panes

• Handle with care; glass is heavy and can break—wear cut-resistant gloves and eye protection
• Installation typically requires removing the oven door and separating the door panels; follow the oven's service manual
• Inspect door gaskets, clips, and mounting hardware during reassembly; replace any worn parts

Nickel

This probe thermistor monitors interior temperature and sends readings to the control board so your appliance can maintain the correct cooling cycle. It replaces a failed or inaccurate sensor to help restore proper temperature regulation. What it does:

• Senses air or evaporator temperature and reports it to the control module
• Commonly related to warm/freezing issues, incorrect temperature readings, or erratic cycling
• Used by the control system to trigger fans, defrost, and compressor operation as needed
• Works as a direct replacement for the listed OEM temperature probe

• Disconnect power before replacing to avoid shock or damage
• Handle the sensor tip and wiring gently to avoid damage to the element or insulation
• Route and secure the wiring so it does not contact moving parts or hot surfaces

This oven bottom is the replacement inner cavity panel that restores a clean, flat cooking surface and helps protect internal components from spills and drips. Fits the bake compartment to maintain proper cookware support and easy cleanup. What it does:

• Replaces a warped, rusted, or damaged oven floor that can trap spills or block airflow
• Provides a flat, heat-resistant surface for bakeware to sit level during cooking
• Shields lower oven components from food debris and corrosive residues
• Helps maintain more consistent heat distribution by restoring the intended cavity shape

• Disconnect power (and gas supply, if applicable) before starting any repair
• Allow the oven to cool completely and remove all racks before installation
• Typically secures with a few screws or clips—keep fasteners from the old part if they are undamaged