General Electric Wall Oven Parts

This inner oven door glass replaces a cracked or damaged inner glass panel to restore the door's seal and appearance. It's the OEM-design inner panel that fits behind the outer door glass and helps keep heat inside the oven. What it does:

• Replaces cracked, chipped or shattered inner door glass that can let heat escape or cause visible damage
• Restores proper door sealing and helps maintain oven cooking performance
• Stops rattling or movement caused by a loose or broken inner glass panel
• Improves the oven's appearance by replacing scratched or clouded inner glass

• One inner oven door glass panel

• Disconnect power to the appliance before starting and allow the oven to fully cool
• Handle glass with heavy work gloves and eye protection; glass edges may be sharp
• Door disassembly is typically required; keep fasteners and brackets organized for reassembly
• Only install the specific OEM part number shown for correct fit and safety

This oven door insulation pad fits behind the inner door liner to help retain heat in the oven cavity and reduce heat transfer to the outer door. It restores proper oven temperature control and improves cooking consistency. What it does:

• Replaces worn or damaged insulation that can allow heat to escape from the oven cavity
• Helps the oven reach and maintain set temperatures for more even baking and roasting
• Reduces excessive outer door temperatures and hot spots on the range front
• Restores the intended thermal barrier between the oven cavity and outer door assembly

• One oven door insulation pad

• Disconnect power to the appliance before starting any repair; allow the oven to cool completely
• Installation commonly requires removing the oven door and inner door liner—follow OEM instructions
• Handle insulation carefully; wear gloves and a dust mask if material is fibrous

This is a replacement 8-18 x 7/16 screw designed to secure appliance panels and small components for reliable fit and stable reassembly. Use it when a missing or damaged screw prevents proper mounting or causes rattling. What it does:

• Secures trim, panels, brackets, or control components where an 8-18 x 7/16 fastener is required
• Restores proper alignment and reduces movement or vibration of mounted parts
• Replaces stripped, rusted, or lost screws to ensure safe operation
• Matches OEM thread and length for correct fit in specified mounting points

• Turn off and unplug the appliance before servicing to avoid electrical or mechanical hazards
• Use the correctly sized driver and match thread engagement; do not over-tighten to prevent stripping
• Compare old screw to new to ensure thread and length match

This oven door insulation retainer secures the insulation inside the oven door, helping maintain proper heat containment and preventing insulation from shifting. It's a small but important clip that keeps the door's inner components stable. What it does:

• Holds inner door insulation in place so insulation stays positioned during use
• Helps maintain consistent heat distribution by preventing insulation gaps
• Reduces rattling or movement of the door interior when opening or closing
• Commonly replaced when insulation is loose, visible, or shifting inside the door

• One oven door insulation retainer

• Disconnect power to the appliance before beginning any repair to avoid shock or injury
• Access typically requires removing the oven door or inner door panel — follow your model's service instructions
• Handle door panels and insulation carefully to avoid damage; keep fasteners organized for reassembly

This right-side oven door hinge secures and guides the door as it opens and closes, restoring proper alignment and smooth movement for safe, reliable oven use. Designed for direct replacement of the factory right hinge. What it does:

• Supports the right side of the oven door so it opens and closes smoothly
• Maintains correct door alignment and gap to ensure a proper seal
• Can resolve door sag, uneven closing, or binding when the hinge is worn or damaged
• Works with existing door components and mounting hardware

• One (1) right-side oven door hinge

• Disconnect power to the oven and allow the appliance and door to cool before starting
• Support the door while removing hinge mounting screws to prevent dropping or damage
• Keep original screws and check their condition; replace if stripped or damaged
• After installation, carefully check door alignment and operation; minor adjustments may be required

This panel and bracket assembly replaces the front control panel support and trim, restoring a secure mounting and finished appearance for the appliance. It helps stabilize the control area and keeps buttons, controls and wiring properly aligned. What it does:

• Provides the structural support and trim for the appliance control panel
• Keeps control components aligned and prevents panel movement or sagging
• Restores a finished appearance when the original panel is cracked, bent, or missing
• Helps reduce rattles or vibration caused by a loose or damaged bracket

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Access typically requires removing exterior trim or the control panel; handle edges carefully — parts may be sharp.
• Save and reuse any screws or mounting hardware unless replacements are supplied.

This oven rack is a replacement chrome wire shelf that supports cookware and bakeware inside the oven, restoring proper airflow and cooking position. It slides into the oven's rack rails and provides a stable surface for pans and trays. What it does

• Replaces a missing, bent, or damaged oven rack so cookware sits level during baking and roasting
• Restores proper rack spacing and airflow for even cooking
• Allows trays and pans to slide in and out smoothly when rack rails are intact
• Helps prevent cookware from tipping or sliding during use

• One chrome oven rack

• No tools typically required; slide rack into the oven's existing rack guides until it seats securely
• Inspect rack rails for damage or buildup and clean before installing to ensure smooth operation
• Use oven mitts or heat-resistant gloves when removing or installing racks in a hot oven
• Do not modify the rack; replace if bent or warped

This fan housing is the plastic mounting and airflow shroud that supports and directs the appliance blower. It helps channel air for proper cooling or venting and restores correct airflow when the original housing is cracked or damaged. What it does:

• Holds and positions the blower assembly so the fan can move air efficiently
• Directs airflow through the oven/cabinet for cooling and ventilation
• Helps reduce air leakage and noise caused by a broken or warped housing
• Can prevent contact between the spinning fan and surrounding components

• One fan housing

• Disconnect power to the appliance before starting any repair
• Handle carefully; housing edges and mounting tabs can be sharp or brittle
• May require removal of oven/cabinet panels and the blower assembly for access
• Replace any damaged mounting hardware

A white bottom trim that finishes and protects the lower front area of the appliance, restoring appearance and covering internal components. Designed as a factory-style replacement to match the original exterior. What it does

• Covers and protects the appliance's lower front/kick area from dust, dings, and incidental contact
• Restores the appliance's finished look when the original trim is cracked, warped, or missing
• Helps keep small debris out of vents and openings beneath the appliance
• Secures to the cabinet/appliance front to maintain proper panel alignment and appearance

• One bottom trim (white)

• Basic snap-in or screw-mount installation; use existing fasteners unless replacement hardware is specified
• Turn off and unplug the appliance and remove any lower access panels before installing
• Handle trim carefully to avoid scratching painted surfaces during installation
• If mounting holes or clips are damaged on the appliance, replacement or repair of those fasteners may be required

This oven door handle replaces a cracked, broken or worn handle and restores a secure grip for opening and closing the oven door. Durable molded finish matches appliance trim and keeps the door easy to operate. What it does:

• Provides a firm grip to open and close the oven door safely and comfortably
• Restores proper leverage when the original handle is cracked, loose or broken
• Helps protect fingers from sharp edges by covering the mounting area
• Matches white appliance trim for a clean, cohesive appearance

• Disconnect power to the appliance before beginning any repair to prevent electrical shock
• Remove the oven door or open access panels as required to reach handle mounting screws
• Use the correct screwdriver or socket to remove and reinstall mounting hardware; do not overtighten screws
• Verify secure fit and alignment before returning the oven to service

This 24-inch replacement door handle restores a secure, easy-to-grip pull for compatible refrigerators and freezers while matching black trim. It replaces damaged, cracked, or missing handles to improve appearance and everyday use. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, broken, or missing handles that affect function or looks
• Restores proper mounting alignment when original handle hardware has failed
• Helps prevent food loss and leaks caused by difficulty sealing the door

• Use basic hand tools; support the door during removal/installation to avoid injury or damage
• Do not overtighten fasteners — snug until secure to prevent cracking the handle
• Turn off power only if needed per appliance service instructions and when working near electrical components

This wiring harness connects the appliance control keypad to the main control assembly, restoring reliable keypad signaling and touch response. Designed to replace a damaged or faulty keyboard harness for proper console operation. What it does:

• Transfers keypad/button signals to the control board so commands are registered.
• Replaces frayed, broken, or corroded wiring that can cause intermittent or no response from the keypad.
• Helps resolve symptoms such as unresponsive buttons, erratic console behavior, or control errors related to the keypad connection.
• Maintains correct connector fit and wire routing to preserve factory electrical paths.

• One keyboard wiring harness as shown.

• Disconnect power to the appliance before starting any repair to avoid shock or component damage.
• Handle connectors gently; align and seat each plug fully to ensure secure electrical contact.
• Route the harness following factory clips and channels to prevent pinching or heat exposure.

This is a replacement right switch sail — the right-side actuator that mounts to the appliance control panel and engages the underlying switch. It restores a positive tactile lever so the control switch can be operated reliably. What it does:

• Replaces a broken, cracked or missing right-side switch actuator on the control panel
• Provides a firm, consistent surface to engage the underlying electrical switch
• Helps eliminate loose, stuck, or non-responsive control levers
• Restores correct alignment so the switch clicks and functions as intended

• One right switch sail (actuator) as shown

• High-level swap: remove the control panel trim, lift out the old actuator, and snap the new sail into the switch housing
• Use care to avoid damaging nearby plastic tabs or the switch; verify correct orientation before snapping into place
• Disconnect power to the appliance before starting any repair to avoid electrical shock

The Control Oven (ERC3DD) is an OEM replacement part for GE ranges. As the central electronic control board, it facilitates operation of all oven features through buttons on the control panel.

Symptoms of a bad control can include:

• Buttons or displays not functioning properly
• Inability to select bake, broil or other cooking options  
• Door lock malfunctioning 
• Temperature not reaching desired set point
• Control panel not responding to input

Causes may relate to component failures over time or damage from water, voltage fluctuations, or other electrical issues. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This keypanel board housing is the outer trim and mounting frame that secures and protects the oven/range control keypad and underlying electronics, helping maintain a clean, functional control area. It replaces a worn, cracked, or loose control-panel assembly to restore a secure keypad fit and appearance. What it does:

• Provides the mounting surface and protective cover for the keypad/control board
• Keeps wiring and electronic components secured and positioned correctly
• Prevents debris and moisture from contacting the control electronics
• Restores a flush, stable control surface when original housing is damaged or loose

• One keypanel board housing assembly as shown

• Power off and unplug the appliance or shut off breaker before servicing
• Follow OEM disassembly steps for removing the control panel to avoid damaging wiring or clips
• Handle the housing and keypad gently to avoid scratching or bending the trim

This is a replacement mounting nut used to secure appliance components and fasteners. It restores proper fastening where a stripped, lost, or damaged nut causes loose panels or rattling, helping stabilize the assembly. What it does:

• Secures studs, bolts, or threaded fasteners to hold parts in place
• Prevents movement and vibration that can cause noise or misalignment
• Replaces stripped, rusted, or missing nuts to restore safe operation
• Matches OEM fit for a secure, long-lasting connection

• Disconnect power and unplug the appliance before starting any repair
• Use the correct socket or wrench size to avoid rounding the nut
• Tighten to snug; avoid overtightening which can strip threads or damage components