General Electric Range Knob, Dial & Button

This replacement control knob fits onto the range/cooktop infinite switch shaft to turn a surface element on/off and select heat levels. A fresh knob restores clear, positive control when the original is cracked, stripped, or missing. What it does:

• Interfaces with the infinite switch to control a surface element's power level
• Enables smooth on/off operation and precise heat selection
• Helps resolve issues like a loose or falling-off knob, difficulty turning the control, or inability to set temperature
• Refreshes worn or damaged control surfaces for easier readability and use

• 1 control knob

• Disconnect power at the breaker before servicing
• Pull the old knob straight off the switch shaft—do not pry against the panel
• Align the new knob with the shaft and push straight on until fully seated
• Reconnect power and verify proper burner operation through all settings

Knob thermostat assembly restores manual temperature control so you can set and adjust cooking heat on your appliance. Replaces worn, cracked, or unresponsive control knobs and thermostat selectors for reliable operation. What it does:

• Provides the user interface for selecting temperature/heat levels by turning the control knob.
• Transfers knob position to the underlying thermostat or control switch to change heating output.
• Common replacement for knobs that are loose, broken, or fail to change temperature settings.
• Often used when the control sticks, spins freely, or the range/oven does not respond to knob adjustments.

• Always disconnect power to the appliance before servicing to avoid electrical shock.
• Remove the old knob/assembly from the control panel; retain mounting hardware if reusable.
• Align the replacement on the control shaft and push into place until it seats; ensure proper orientation before testing.

Replacement control knob that restores user control of burner and oven settings for affected ranges. Simple direct-fit design provides a secure grip for precise selection of heat settings and replaces worn or broken knobs. What it does:

• Replaces a cracked, stripped, loose, or missing control knob so you can turn burners and oven controls reliably.
• Fits onto the valve/shaft to allow selection of temperature and power levels.
• Common symptoms addressed: knob spins freely, won't engage, is broken, or is lost.
• Matches OEM fit and appearance when the listed part number is the correct match for your appliance.

• Always disconnect power (and shut off gas for gas ranges) before servicing controls.
• Most knobs pull straight off the control shaft; align splines and push the new knob onto the stem until fully seated.
• If the old knob is stuck, use a cloth and steady pull—avoid excessive force or metal tools that can damage the shaft.
• If the knob does not seat correctly, check for a damaged valve stem or required adapter before forcing installation.

Color: black. Measures about 2 inches in diameter.

This replacement valve control knob restores precise burner operation and a clean look on your range or cooktop. It provides a secure grip and clear indexing when your original knob is cracked, stripped, loose, or missing.

• Attaches to the burner valve stem to turn the surface burner on/off and adjust flame level
• Replaces damaged or stripped knobs that slip, spin freely, or won't stay on the stem
• Restores proper pointer alignment and tactile feel during operation

• Ensure all controls are OFF and the surface is cool; for safety, disconnect power or shut off gas
• Pull the old knob straight off the valve stem—no tools typically required
• Align the new knob with the stem and press firmly until fully seated
• Test for smooth rotation and correct indexing

This control knob replaces a worn or missing knob on your range or cooktop. It pushes onto the control shaft so you can adjust heat settings with a solid grip and reliable operation.

• Attaches to the control shaft to turn the valve or thermostat
• Restores smooth, accurate adjustment of burner or element settings
• Common symptoms: knob cracked, stripped, loose, falls off, or missing

• Ensure all surfaces are cool; disconnect power. For gas units, shut off gas if working near burner valves
• Pull the old knob straight off; avoid prying. Retain any clip/adapter if present
• Align the new knob with the shaft flat/key and press fully onto the stem
• Do not force; if the knob doesn't seat, inspect the shaft for damage

This is a replacement control knob in black with stainless trim for select cooking appliances. It restores a secure grip and accurate selection of heat or functions when the original knob is cracked, stripped, missing, or worn.

• Attaches to the control shaft to adjust burner heat or oven settings
• Replaces knobs that are cracked, stripped, loose, or missing
• Restores proper control feel and setting alignment
• Finish: black with stainless trim to match the original

• Disconnect power; if applicable, shut off gas and let all surfaces cool
• Pull the old knob straight off the stem
• Align the new knob's opening with the control stem and press straight on—do not force
• Verify correct orientation and smooth operation through all settings

This control knob replaces a worn or broken knob on your range, restoring a solid feel and precise control of settings. It fits onto the control shaft to let you reliably select and adjust cooking settings.

• Attaches to the valve or switch shaft to select and adjust settings
• Restores proper engagement when the original hub is cracked or stripped
• Helps ensure accurate adjustments of flame or element power
• Typical signs you need this part: knob is cracked, loose, slipping, or missing

• Disconnect power and ensure all burners are cool before servicing
• Pull the old knob straight off the stem; avoid prying sideways
• Align the new knob with the stem orientation and press firmly into place; if your model uses a set screw, tighten gently
• Test for smooth operation and correct indexing after installation

The Knob Thermostat Assembly is an OEM part for GE gas ranges. It allows for control of oven baking temperatures through the regulation of pilot lights and burners.

Symptoms of a bad knob thermostat assembly include:  

• Erratic or inaccurate temperature readings
• Difficulty selecting or maintaining desired heat levels
• Unstable or inconsistent baking performance   
• Improper ignition or control of range burners

Causes of a malfunctioning knob thermostat include continuous exposure to cooking heat and normal wear over extended use. The internal components experience constant adjustment and fluctuations that can lead to loosening or degradation over time.

This part works for some Hotpoint and RCA gas range models as well.

The Gas Range Knob Asm is an OEM component specifically designed for GE gas ranges. It consists of the sturdy knob handles used to turn gas burners on and off, or adjust flame levels. 

Causes of a bad gas range knob assembly include general wear and tear from frequent use. Exposure to cooking spillages and cleaning solutions may also negatively impact knob integrity if not properly cleaned.

Symptoms of a bad gas range knob assembly consist of:

• Difficulty turning knobs fully on or off  
• Knobs slipping out of set positions
• Knobs cracking, splitting, or signs of damage
• Inconsistent or uncertain burner control

This genuine GE replacement part is also compatible with some gas ranges from Hotpoint, Magic Chef, and select Kenmore models

The Infinite  Knob is an OEM replacement part for GE ranges. It allows you to easily adjust and control the heat settings of your range. A bad infinite knob can be caused by regular wear and tear, accidental damage, or exposure to heat and moisture. If you find that the knob is difficult to turn, loose, or shows signs of wear, it may be time to replace it.

Symptoms of a faulty infinite knob include:

• Difficulty in adjusting burner heat levels
• Loose or wobbly knob
• Damage or discoloration of the knob

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This burner control knob lets you set the surface burner level on your range or cooktop. Replace a cracked, worn, or missing knob to restore reliable control and a clean, matched stainless-steel look.

• Attaches to the burner valve/switch shaft to select settings from Off to High
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps the control turn smoothly and stay aligned with the indicator
• Restores a consistent appearance across all burner controls

• Ensure all controls are Off and surfaces are cool; disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; if tight, pull evenly—do not pry against the panel
• Align the new knob hub with the stem and press straight on until fully seated

The Knob Assembly is an OEM part for GE gas ranges. It serves as the interface allowing precise temperature and function control of the appliance. 

Causes of a faulty knob can include minor internal component wear, stresses from repetitive use, or impacts damaging knob connections over time.  

Symptoms include:

• Difficulty turning or fully engaging temperature or setting selections
• Loose, wobbly, or misaligned positioning on the control panel  
• Faded or degraded identifying markings on the knob face

This GE replacement restores easy, accurate usability of all range features. Compatible with Hotpoint, RCA and Kenmore appliances as well, it prevents further wear issues.
 

Replacement control knob that restores safe, reliable control and the original appearance to your appliance. The black finish matches existing controls and provides a positive grip for setting temperatures and functions. What it does:

• Replaces a cracked, melted, stripped, loose, or missing control knob so you can operate the control shaft properly
• Slides onto the control shaft to set temperature or function positions with a clear pointer
• Restores a finished look to the control panel and prevents accidental slips while adjusting settings
• Matches original-style black finish for a consistent appearance

• Always disconnect power to the appliance before servicing controls
• Knob typically pulls straight off the control shaft; align pointer with the control post when installing
• Do not force the knob if it won't seat—inspect the control shaft for damage or worn splines

This replacement knob fits the surface element control on your range or cooktop. It restores a secure grip and clear pointer so you can smoothly turn the control from Off to the desired heat level.

• Engages the infinite switch shaft to turn a surface element on/off and adjust heat
• Provides a clear indicator for temperature/setting selection
• Helps resolve issues like a cracked, stripped, loose, wobbly, or missing knob
• Refreshes the appliance's appearance with a matching black finish

• Disconnect power and allow all elements to cool before servicing.
• Pull the old knob straight off the control shaft.
• Align the new knob with the shaft and press straight on until fully seated; verify the pointer is at Off.
• If the knob doesn't seat easily, check the shaft for burrs/debris—don't force or twist.

This oven thermostat knob assembly replaces the control knob that mounts to the thermostat shaft, letting you set and adjust cooking temperature smoothly again. Use it when the original knob is cracked, stripped, loose, or missing.

• Attaches to the oven thermostat shaft to select temperature
• Restores positive engagement when the old knob is cracked or stripped
• Common symptoms: knob loose or wobbly, spins without changing settings, falls off, or cannot be turned
• Direct replacement for a missing or damaged thermostat knob

• Disconnect power or unplug the appliance before servicing to prevent accidental activation
• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the flat on the knob insert with the flat on the shaft, then press on until fully seated
• Verify the knob turns smoothly and points correctly