Husqvarna Fastener

This replacement part is a bolt, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Bolts are found in different places inside many devices. This part is essential to the overall operation of many machines. This specific one is intended for lawn mowers and assists the overall device in working properly.A new bolt might be needed if the current one is damaged or missing. It is possible that the bolt can become stripped or damaged overtime, and should be replaced if this is the case. Be sure to reference the specific owner's manual for more information on how to replace or install this bolt. This is a single bolt. Be sure to purchase the correct amount as many machines require more than one to operate. This is a genuine OEM replacement part sourced directly from the manufacturer.

This bow tie cotter pin is a manufacturer part designed to replace the original on select riding lawn mowers. The cotter pin has many applications, depending on the exact model of tractor, but typically acts as an anchor. The pin is installed in a drilled hole or small shaft on a bolt or axle and then the sections of the pin are spread to keep the assembly in the perfect position and hold everything together. These pins allow for some flexibility, but that also makes them subject to damage or breakage because of vibrations and other issues. This genuine cotter pin fits over 150 tractors from brands like Jonsered, Husqvarna, Weed Eater, Poulan, and Craftsman. Pliers may be required to replace this part. Always wear gloves and eye protection for added safety and disengage the engine before beginning any repairs. This cotter pin is sold as a single unit and does not include any additional components or hardware.

This torsion spring retainer is a genuine Husqvarna part, sold individually. This torsion spring retainer can be used as a replacement part in a lawn mower. This part secures and stabilizes parts within the mower. If the torsion spring retainer loses its basic functionality and cannot be easily repaired, the torsion spring retainer should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This torsion spring retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Ariens.

This idler belt keeper is a genuine Husqvarna part, sold individually. This idler belt keeper can be used as a replacement part in a lawn mower. The purpose of the idler belt keeper in a lawn mower is to affix to the idler pulley so that the idler belt can be rotated, facilitating movement during the standard operation of the lawn mower.The idler belt keeper might need to be replaced at some point within the standard lifespan of a lawn mower if the component suffers damage that renders it beyond functionality. If the idler belt keeper is punctured, scraped, warped, eroded, dented, cracked, or otherwise damaged, the component should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, as safe operation of the appliance cannot be guaranteed without the idler belt keeper in place. It is a simple replacement process that will require only basic tools to properly execute.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This idler belt keeper is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Ariens.

This part is a clean-out mounting clamp that is used on snowblowers. The purpose of the clean-out mounting clamp is to hold the clean-out tool. This component attaches to the auger housing and is manufactured out of a heavy-duty black metal material.A new clean-out mounting clamp may be needed if the original is cracked, broken, or damaged in any way. If the clean-out mounting clamp is missing from the snowblower, the operator may wish to replace this part out of convenience, although this part is not essential to the operation of the snowblower. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This clean-out mounting clamp is a genuine Husqvarna part. It is sold individually. This specific clean-out mounting clamp is compatible with snow blowers that are manufactured by the Husqvarna, Poulan, and Jonsered brands.

This spacer is a genuine Husqvarna part, sold individually. This spacer can be used as a replacement part in a lawn mower. The purpose of the spacer in a lawn mower is to function within a fastening component, such as a washer, screw, bolt, or nut, in order to reduce friction between components as well as to allow room within the infrastructure of the appliance for components to shift and move around without detaching.The spacer in a lawn mower might need to be replaced if the small component is lost, misplaced, or damaged over time. Additionally, the spacer can fall out and be lost over the typical use of the lawn mower. If this occurs, the spacer should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spacer is compatible with the following outdoor brands: Husqvarna, Craftsman, McCulloch, Poulan, Flymo, and Weed Eater.

This replacement part is a flange nut. This is a genuine replacement part made by Husqvarna. This part is small but important in many types of machinery and appliances. Flange nuts work with other small parts to keep things secure and in place during use. A new flange nut might be needed if the current one is missing or damaged in any way. It is possible that the nut becomes stripped or worn down over time and should be replaced. Be sure the engine is completely powered down before replacing any part. This should be a simple repair and only require common household tools such as a screwdriver or pliers. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure a proper fit and long-lasting use.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

Attaching to the front lift link, this washer is a component for use with lawn tractors. A washer is a component that is used with a screw fastener. Its purpose is to keep the screw from loosening by distributing the load over a larger area. A new washer may be needed if the user has mistakenly misplaced the original. When dealing with small parts, it's a good idea to place them in a container so that they are not lost. The washer could physically break over time due to normal wear and tear. If this is the case, it will need to be replaced so that the screws do not loosen. The repair person may choose to wear gloves to protect his or her hands during the replacement process.This washer is sold individually. It is an OEM part that is sourced directly from the manufacturer. It's compatible with lawn tractors that are manufactured by the Husqvarna, Poulan, and Craftsman brands.