Parts for Lg LFX25974SW/06: Ice Maker & Ice Bin Parts

Replacement mounting screw for refrigerator assembly. Secures components and panels inside your fridge. Order a new screw if yours is stripped or missing.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Mounting screw for bottom-mount refrigerators. Secures internal components and panels. Replace if stripped, missing, or damaged during repair work.

Replacement mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is stripped, worn, or missing.

Taptite screw for securing components inside your refrigerator. Replaces lost, stripped, or corroded fasteners during repairs or reassembly.

Replacement holder bracket for refrigerators. Secures internal components in place. Order a new bracket if yours is cracked, broken, or missing.

Replace your refrigerator's broken, cracked, or missing door handle. This exterior handle installs on the door for easy opening and closing.

This is a rear end cap that attaches to the refrigerator door handle, providing a finished appearance at the handle's end. It snaps or fastens onto the handle assembly to secure it in place. Replace this cap if it is cracked, broken, or missing, which can cause the handle to feel loose or look incomplete.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

This duct assembly routes internal airflow in the appliance, replacing damaged or worn vent tubing to restore proper air movement. It helps reduce air leaks and airflow-related performance issues when the original duct is compromised. What it does:

• Channels blower air from the fan housing to the exhaust path to maintain proper ventilation.
• Replaces collapsed, torn or disconnected ducting that can cause poor airflow.
• Addresses symptoms such as reduced drying/cooling performance, longer cycles, or warm cabinet air.
• Helps eliminate drafty or noisy airflow caused by gaps or damaged duct sections.

• Disconnect power (and turn off gas supply for gas appliances) before beginning service.
• Access may require removing rear or lower access panels; keep hardware organized for reassembly.
• Inspect and replace any damaged clamps, seals or gaskets during installation for a proper seal.

Freezer drawer roller assembly enables smooth gliding of your refrigerator's lower drawer. Replace if drawer sticks, wobbles, or is hard to open. Confirm fit with your model number before ordering.

Dual roller wheel assembly that mounts to the rear wall of the freezer drawer. Replace when wheels are missing, broken, or cracked for smooth sliding.

Structural base for refrigerator bins and drawers. Provides sturdy support and proper rail alignment. Replace if cracked, warped, or broken.

Replaces a cracked, warped, or broken drawer tray assembly in your refrigerator. Restores smooth sliding and proper fit within the drawer compartment tracks.

Bottom freezer basket for refrigerators. Organizes frozen foods in the lower freezer compartment. Replace if cracked, broken, or damaged from impact.

Replacement shelf assembly for refrigerators. Installs inside fresh food compartment. Needed when original shelf is cracked, broken, or missing.

Replace your cracked or broken refrigerator shelf assembly. This glass shelf installs inside your fridge to organize and support food items.

Replace your cracked or broken refrigerator shelf assembly. This glass shelf installs inside your fridge to organize and support food items.

Replacement glass panel for refrigerator shelves. Restores a smooth surface when the original is cracked, broken, or missing. Panel-only component.

Secures and supports shelves inside your refrigerator. Replace if cracked, broken, or missing to properly hold shelves in place and restore stability.

Multi duct assembly for refrigerators. Directs airflow between compartments. Replace if cracked, broken, or missing to restore proper air distribution.

Guides refrigerator drawer or rack for smooth sliding. Replace if bent, broken, or drawer sticks. Confirm fit with your model number before ordering.

Replacement guide rail for refrigerator freezer drawers. Keeps drawers aligned and sliding smoothly. Order if your rail is cracked, broken, or worn.

The Tray Asm is an OEM part for LG refrigerators. It is designed to store fruits and vegetables at optimal humidity levels, helping to keep produce fresh for longer periods. It has approximate measurements of 30 inches in length, 18 inches in width, and 4 inches in height.

Causes of a bad tray asm can include cracking or breaking due to frequent use, accidental dropping, or exposure to heavy loads that exceed its capacity. Over time, the plastic can also become brittle and more susceptible to damage.

Symptoms of a bad tray asm include:

• Cracks or breaks in the drawer
• Difficulty sliding the drawer in and out
• Produce not staying fresh as long
• The drawer not fitting properly in its compartment

This OEM LG part is also compatible with Sears/Kenmore models.

Air duct connector for refrigerators. Channels airflow between compartments. Replace if cracked, broken, or missing to restore proper air circulation.

Replace your cracked, warped, or missing refrigerator tray cover. Keeps contents contained and restores clean appearance in tray compartment.

Replaces cracked or damaged crisper drawer in your refrigerator. Restores secure storage for fruits and vegetables with proper support and organization.

Replacement crisper drawer assembly for your refrigerator's fresh food compartment. Restores organized produce storage when original is cracked or missing.

This is the cover frame assembly that sits above the crisper drawers in the refrigerator compartment. It supports a glass or plastic shelf and helps maintain proper humidity and temperature in the crisper section below. Replace this cover frame if it is cracked, warped, or broken, which can prevent crisper drawers from sliding properly or reduce the freshness of stored produce.

Broken or missing light cover leaving your refrigerator interior dim or exposed? This lens snaps into place in minutes to restore even lighting.

Replacement guide assembly that secures and aligns internal TV components and cabinet panels to restore proper fit and reduce movement. Use this guide when a panel or internal module sits loose or causes vibration or rattling. What it does:

• Positions and supports internal components and circuit boards to maintain correct alignment
• Secures cabinet panels and trim to prevent gaps and movement
• Reduces vibration and rattling caused by loose internal parts
• Helps maintain proper routing for internal cables and connectors

• Disconnect power and remove the TV from its stand or wall before starting repair
• Use proper tools and keep screws/fasteners organized; handle panels and the display with care
• Follow the OEM service manual for disassembly/reassembly steps and torque specs

Drawer rail guide assembly for bottom-mount refrigerators. Supports and aligns drawer slides for smooth operation. Replace if cracked, broken, or worn.

This slide rail guides and supports your refrigerator's crisper drawer as it opens and closes smoothly. It mounts to the left side of the drawer compartment and bears the weight of the loaded drawer. Replace this if your crisper drawer sticks, won't slide properly, or falls off its track when pulled out.

Supports and guides refrigerator drawer for smooth opening and closing. Attaches to cabinet wall. Replace if cracked, worn, or causing drawer misalignment.

Supports and aligns pull-out drawer slides for smooth, even gliding. Replace if your rail guide is cracked, broken, or missing to restore stable drawer operation.

Replace your worn freezer door gasket to restore an airtight seal. Keeps cold air in, reduces frost buildup, and maintains stable temperatures. Confirm fit with your model number before ordering.

Cap cover for bottom-mount refrigerators. Installs to conceal screws or openings. Replace if cracked, broken, or missing for a finished appearance.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Refrigerator door gasket seals the door to maintain temperature and prevent air leaks. Replace when worn, cracked, or not sealing properly. Confirm fit.

Door gasket creates an airtight seal to keep cold air in and warm air out. Replace if torn, cracked, or no longer sealing properly. Confirm fit by model.

Front plate assembly provides finished trim and mounting surface for your refrigerator. Replace when original panel is cracked, warped, or damaged.

The Drawer Guide is an OEM part for LG refrigerators. This part allows the smooth and effortless operation of the refrigerator's drawers, ensuring they glide in and out with ease. 

Causes of a bad drawer guide can be attributed to wear and tear over time, misalignment during installation, or damage from excessive force or improper use of the drawers.

Symptoms of a bad drawer guide include:

• Difficulty opening or closing the drawers
• Drawers getting stuck or not sliding properly
• Excessive friction or resistance when operating the drawers
• Drawers becoming misaligned or tilted
• Unusual noises or grinding sounds when using the drawers

This OEM LG part is also compatible with some Kenmore models.

Storage basket that mounts inside your refrigerator door for organizing condiments and small items. Replace if cracked, broken, or missing.

Removable door basket that mounts inside your refrigerator door to hold bottles, condiments, and small items. Replace cracked, broken, or missing bins.

Mounts inside the refrigerator door to hold bottles, jars, and condiments. Replace if cracked, broken, or missing to restore organized storage space.

Replaces broken or missing door bin on your refrigerator. Attaches to inner door rails for secure storage of bottles, jars, and condiments.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door stopper assembly for refrigerators. Installs on the door to limit opening angle and prevent wall damage. Replace if cracked, broken, or missing.

Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Replaces cracked or broken control connector housing on your refrigerator. Protects electrical connections from damage and dust. Direct fit replacement.

Secures sliding rail assembly for smooth drawer movement in bottom-mount refrigerators. Replace if cracked, broken, or loose to restore alignment.

Replacement slide rail for refrigerator drawers. Installs on the side of crisper or deli drawers to enable smooth gliding. Order if cracked or broken.

Plastic holder that secures the drawer rail to the refrigerator frame. Replace if cracked, broken, or missing to properly support and align drawers.

Protects electrical connectors in your refrigerator from moisture and debris. Replace if the cover is cracked, broken, or missing to restore shielding.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Replace your refrigerator's handle bar if it's cracked, broken, or worn. This structural component attaches to the door for smooth opening and closing.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Supports the center door on bottom-mount refrigerators. Replace if your hinge is cracked, worn, or broken to restore proper door alignment.

Service spanner tool for refrigerator maintenance. Provides secure grip for loosening and tightening service fittings and retaining nuts. Replace if lost.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Refrigerator mullion door won't close or seal properly? This spring operates the center divider flapper door. DIY-friendly installation in 5 minutes.

Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.

Right side upper hinge.

Ice freezing in holder or chute not opening fully? This ice dispenser door seals the chute to prevent frost buildup and air leaks. Easy DIY repair.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

Ice chute door not opening fully? This dispenser door link connects the actuator to the door for smooth operation. Simple DIY fix for binding doors.

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.

If your refrigerator dispenser paddle is cracked, loose, or won't spring back, this lever restores reliable push-button operation and user control.

Fix water pooling or leaks inside your refrigerator with this water funnel. Directs water flow to prevent drainage issues. Easy DIY repair in minutes.

Replacement display cover assembly for refrigerators. Protects control panel electronics and provides clean finished appearance. Order if original is cracked, broken, or missing.

Cracked or missing dispenser cover exposing internal components? This refrigerator dispenser cover restores the clean appearance of your water/ice dispenser.

This display cover is the clear protective lens that fits over the appliance control panel, restoring a clean appearance and protecting the underlying display and buttons from dirt, spills and wear. What it does

• Protects the control board and display from splashes, grease and daily wear.
• Keeps touchpads and button legends visible and readable.
• Helps maintain a finished, factory look for the control panel.
• Replaces a cracked, scratched or discolored lens that affects appearance or usability.

• One display cover (control panel lens)

• Disconnect power to the appliance before starting any work.
• Remove any trim or bezels covering the control panel as required to access the lens.
• Handle the lens carefully to avoid scratches; use a soft cloth and appropriate fasteners.

Fix a refrigerator door that won't latch or a control that doesn't respond. This lever button restores push-button function in 15 minutes or less.

Fix unresponsive or stuck refrigerator controls with this lever button. Restores tactile operation when your control panel button is cracked or broken. Simple fix.

Plastic cap that covers and seals the air duct in your refrigerator. Replace if cracked, broken, or missing to maintain proper airflow and appearance.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Refrigerator not cooling properly? A failed evaporator assembly prevents proper air circulation. This internal component maintains balanced cooling temperature.

Refrigerator not cooling and compressor is warm? This overload protector prevents compressor damage during electrical overloads or overheating.

This PTC cover is the protective housing that shields a PTC sensor/assembly from debris and physical damage, helping maintain reliable sensor performance and prolong component life in the appliance. What it does:

• Protects the PTC sensor or PTC assembly from dust, impact, and accidental contact
• Helps prevent shorting or intermittent sensor signals caused by contaminants
• Supports proper positioning and mounting of the PTC component
• Can help address symptoms such as visible sensor damage, exposed wiring, or intermittent operation related to a compromised sensor housing

• Disconnect power to the appliance before starting any repair
• Remove the outer panel(s) as needed to access the PTC location; handle surrounding wiring and components carefully
• Replace only with the correct OEM cover to ensure proper fit and protection

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

This tray assembly collects and channels defrost and condensation water to the drain, helping prevent leaks and water buildup under the appliance. Designed to fit into the drain path and route moisture away safely. What it does:

• Catches defrost and condensation runoff and directs it toward the drain
• Helps prevent pooling and water damage inside the lower cabinet area
• Supports proper evaporator/drain operation by maintaining the drain path
• Can reduce dripping or puddling symptoms when the original tray is cracked or clogged

• 1 tray assembly

• Inspect surrounding seals and drain lines before installing; replace any damaged components
• Clean drain channel and remove debris to ensure proper flow prior to installation
• Handle gently to avoid cracking plastic tabs; use basic hand tools for removal/installation
• Disconnect power to the appliance before accessing internal components to avoid injury

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Replacement drip tray for refrigerators. Installs under evaporator coils to catch condensation and defrost water. Replace if cracked, warped, or missing.

The Fan Assembly is an OEM part for LG refrigerators. It is responsible for circulating air within the refrigerator and freezer compartments, ensuring consistent cooling and optimal temperature distribution. The fan assembly helps maintain the freshness of your food by evenly distributing cold air.

Common causes of a bad fan assembly include electrical issues, worn-out bearings, or obstructions that prevent the fan from spinning properly.

Symptoms of a bad fan assembly include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures within the fridge or freezer
• Frost buildup in the freezer
• Refrigerator running continuously or not cooling effectively

This OEM LG part is also compatible with Sears/Kenmore models.

This is a plastic grille or cover that sits over the evaporator fan area inside the refrigerator or freezer compartment. It directs cold air flow from the evaporator coils into the compartment while protecting the fan and coils from contact with food items. Replace this cover if it is cracked, warped, or if frost is building up unevenly inside the compartment due to improper airflow.

Fix refrigerator lights staying on or not turning off when door closes. This magnetic door switch is a common solution. Simple DIY repair in 15 minutes.

Refrigerator not cooling or freezer frosting up? The evaporator fan motor circulates cold air through your fridge. Moderate DIY repair for bottom-mount models.

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Secures and supports the motor assembly in your refrigerator, keeping it aligned and reducing vibration. Replace if cracked, broken, or worn to restore stable mounting.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Fix unresponsive controls or features that won't activate with this refrigerator push button switch. Simple replacement restores button functionality.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Replacement mounting bracket that secures internal components to the cabinet frame. Needed when original is cracked, bent, or broken, causing loose parts.

Frost buildup affecting cooling? This refrigerator defrost heater melts ice from evaporator coils to restore efficiency. Moderate DIY repair.

Replaces cracked or yellowed interior light lens. Protects bulb from moisture and impact while ensuring even illumination. Verify fit by model number.

Replace the interior light housing cover in your refrigerator. Needed when the original lamp case is cracked, broken, or missing. Installs inside the fridge.

This run capacitor provides the continuous electrical boost needed to keep the refrigerator's compressor motor running efficiently. It stores and releases energy to maintain the proper phase and voltage for the compressor during normal operation. Replace this capacitor if the compressor struggles to start, hums without running, shuts off intermittently, or if the refrigerator stops cooling altogether.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

Fixes refrigerator power loss, sparking, or intermittent operation. This power cord assembly restores safe electrical connection from wall outlet to appliance.

Fix a refrigerator that won't cool, has no display, or won't power on with this main power control board. Moderate difficulty repair, 30-45 minutes.

Fix a refrigerator that won't cool, has no display, or won't power on. This power control board assembly restores electrical function and system control.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Dim or uneven refrigerator lighting? This interior light cover assembly shields the bulb and diffuses light evenly. Simple 5-minute snap-in repair.

Protects and diffuses the interior lamp for even lighting. Replace if cracked, yellowed, or broken to restore visibility and shield the bulb from spills.

The Ice Maker Assembly Kit is an OEM part for LG refrigerators. This kit includes all the necessary components to produce ice efficiently, ensuring your refrigerator maintains a steady supply of ice for your household. The kit also features a 20-pin and 3-pin wiring harness.

Causes of a bad ice maker assembly can include wear and tear over time, mineral buildup from hard water, or electrical malfunctions. Additionally, damage can occur due to improper handling or issues with other components in the ice-making system.

Symptoms of a bad ice maker assembly include:

• No ice production
• Slow ice production or smaller ice cubes
• Ice cubes that are misshapen or irregular
• Leaking water around the ice maker
•  Unusual noises during the ice-making process

This OEM LG part is also compatible with Sears/Kenmore.

This is the motor that drives the auger inside the ice dispenser chute of a refrigerator. It rotates the auger to push ice from the storage bin through the dispenser opening when the lever or button is activated. Replace this motor if ice is not dispensing, you hear a humming sound but the auger doesn't turn, or the dispenser motor has stopped working entirely.

Bracket holder for bottom-mount refrigerators. Secures internal components in place. Replace if cracked, broken, or missing to restore stability.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

The Temperature Sensor is an OEM part for LG refrigerators. Also known as a thermistor, is responsible for sensing the temperature changes and providing the necessary feedback to the refrigerator's control board. It helps maintain accurate and consistent temperature levels, ensuring optimal food preservation and efficient cooling.

Causes of a faulty temperature sensor can include wear and tear over time, damage due to electrical issues or exposure to extreme temperatures, or sensor calibration issues. These factors can result in temperature inconsistencies, inaccurate readings, or improper cooling performance of the refrigerator.

Symptoms of a bad temperature sensor may include:

• Incorrect temperature readings on the control panel
• Temperature fluctuations inside the refrigerator
• Overcooling or inadequate cooling of food items

This OEM LG part can also be used on Kenmore/Sears appliances. 

Ice maker not producing ice or auger not dispensing? This ice maker and auger motor assembly restores automatic ice production and dispensing function.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Leaking water line connections? This inline tube connector joins two sections of tubing for a secure, leak-resistant seal. Quick 10-minute fix.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

If your refrigerator's water dispenser or ice maker stopped working, the water tank assembly may need replacement. Restores proper water flow and ice production.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Plastic cover cap for refrigerators. Snaps onto hinges, handles, or shelving brackets to conceal mounting hardware. Replace when cracked or missing.

This filter assembly head secures the refrigerator water filter and routes filtered water to the dispenser and icemaker. It restores proper filter seating and helps stop leaks or loss of water flow when the head is damaged or worn. What it does:

• Holds and seals the water filter cartridge so water passes through the filter element before dispensing
• Directs filtered water to the dispenser and icemaker plumbing
• Replaces cracked or warped housing that can cause leaks or poor filter seating
• Helps resolve intermittent water flow, leaks, or a filter that won't stay locked in place

• One filter assembly head as shown

• Turn off the refrigerator water supply and run the dispenser until flow stops to relieve pressure before removing the old head
• Inspect and lubricate O-rings with a food-safe silicone grease if reusing, or replace O-rings if damaged
• Hand-tighten the filter per manufacturer guidance; check all fittings for leaks after restoring water

Covers and protects refrigerator tubing inside the cabinet. Replace this tube cover if the original is cracked, broken, or missing to restore proper appearance.

Refrigerator pipe holder bracket secures water lines and tubing in place. Replace if cracked, broken, or missing to properly support pipes inside your fridge.

This replacement pipe holder secures a small appliance pipe or tube in place, reducing movement and vibration to help prevent noise, wear, or accidental disconnection. It restores proper routing and support for the pipe. What it does:

• Secures a pipe or tubing to the appliance frame or chassis to keep it from shifting
• Reduces rattling or vibration caused by loose plumbing or tubing
• Helps maintain proper alignment to avoid chafing or contact with other components
• Useful when a cracked, broken, or missing clip allows pipe movement

• Turn off and unplug the appliance before accessing internal components
• Remove any panels or covers to reach the pipe clip location
• Snap the clip over the pipe into the existing mounting tab; replace any damaged mounting hardware

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.

Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.

Seals your refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

Seals the ice bin compartment to prevent warm air and moisture intrusion. Replace when worn or torn to reduce frost buildup and ice clumping.

This lever cover is a molded trim/protective piece that fits over a user-operated lever on the appliance. Replacing a damaged or missing cover helps protect the mechanism and restores a clean, finished appearance. What it does:

• Shields and guides the lever mechanism to help ensure smooth operation
• Helps keep internal components covered and aligned
• Restores the finished look when the original cover is cracked or missing
• Common symptoms: cracked or broken cover, loose/wobbly lever feel, sticking or misaligned lever action

• Includes 1 lever cover

• Disconnect power before servicing; if working near a dispenser, shut off water supply as applicable
• Remove any screws or clips and release locking tabs carefully to avoid breaking adjacent plastics
• Transfer any reusable hardware from the original part
• Check lever movement and engagement before final reassembly

The LG Refrigerator Water Filter is an OEM Replacement Part. It is designed to improve the quality of water and protect refrigerators and ice machines from sediment deposits. This NSF-Certified filter effectively reduces iron and particulates. It also preserves beneficial minerals like fluoride. The filter measures 5.6 inches high and 3.3 inches in diameter.

It is installed by removing the top shelf and pulling the old filter downward. Then turn it counter-clockwise, and replace it with the new filter aligned in a horizontal position. To ensure the best performance and the removal of trapped air and contaminants, it's recommended to flush the dispenser with 2.5 gallons of water in alternating cycles. If your model includes a water filter indicator, press and hold the Filter or Reset button for 5 seconds after installation. With a lifespan of 6 months and a 500-gallon capacity, this filter provides both quality and longevity.