We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Show parts
Replacement mounting screw for refrigerator assembly. Secures components and panels inside your fridge. Order a new screw if yours is stripped or missing.
Usually ships within 4 - 14 days
Replacement mounting screw for refrigerator panels, brackets, and internal assemblies. Restores secure fastening when original screw is missing, stripped, or damaged.
This mounting screw secures panels and small components on compatible LG appliances, restoring fit and stability for loose or rattling parts. A simple replacement that helps prevent further wear and noise from unsecured pieces. What it does
Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.
Mounting screw for bottom-mount refrigerators. Secures internal components and panels. Replace if stripped, missing, or damaged during repair work.
Replacement mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is stripped, worn, or missing.
Taptite screw for securing components inside your refrigerator. Replaces lost, stripped, or corroded fasteners during repairs or reassembly.
Replacement holder bracket for refrigerators. Secures internal components in place. Order a new bracket if yours is cracked, broken, or missing.
Lower cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing lower covers. Installs at the base of the refrigerator.
Fix water pooling under your refrigerator with this drain tube assembly. Replaces cracked or clogged tubes to restore proper drainage. Straightforward repair.
Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.
Fix uneven cooling or excess noise in your refrigerator. This air duct assembly restores proper airflow between compartments for consistent temperatures.
This part is discontinued by the manufacturer and is no longer available for purchase.
Freezer drawer roller assembly enables smooth gliding of your refrigerator's lower drawer. Replace if drawer sticks, wobbles, or is hard to open. Confirm fit with your model number before ordering.
Dual roller wheel assembly that mounts to the rear wall of the freezer drawer. Replace when wheels are missing, broken, or cracked for smooth sliding.
Replaces a cracked, warped, or broken drawer tray in your refrigerator. Restores level storage and smooth operation for food and items in the drawer.
Replace your broken refrigerator drawer tray assembly to restore proper alignment and support for stored items. Includes complete tray structure. Verify fit with your model number before ordering.
Replace a cracked, broken, or missing refrigerator shelf. This glass shelf assembly installs on standard supports to restore organized storage space.
Replaces a cracked, bowed, or missing refrigerator shelf. Restores sturdy, level storage surface in the fresh food compartment for organized food.
Replace your broken or cracked refrigerator glass shelf. This tempered glass shelf installs in the fresh food compartment to organize food items.
Secures and supports shelves inside your refrigerator. Replace if cracked, broken, or missing to properly hold shelves in place and restore stability.
Drawer slide rail guide assembly for refrigerator shelves and bins. Replaces worn, broken, or damaged rails that cause sticking or misalignment.
Right-side Fresh Room tray assembly for refrigerator pantry drawers. Replace if cracked, broken, or warped. Restores level storage in deli section.
Air duct connector for refrigerators. Channels airflow between compartments. Replace if cracked, broken, or missing to restore proper air circulation.
Fix erratic operation or cycling issues in your refrigerator with this DC drive motor. Restores proper rotation and performance when the original motor fails.
Dim or uneven refrigerator lighting? This LED light cover protects the bulb assembly and diffuses light evenly. Direct-fit lens restores visibility.
Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.
Right-side vegetable crisper drawer for bottom-mount refrigerators. Replace if cracked, broken, or missing to restore produce storage functionality.
Left side vegetable drawer assembly for bottom-mount refrigerators. Includes wheels and track system. Replace if cracked, broken, or missing.
This is a clear or translucent cover frame that sits above the crisper drawers in the refrigerator compartment. It acts as a shelf and humidity barrier, helping regulate moisture levels around stored fruits and vegetables. Replace this cover if it is cracked, warped, or no longer sits flush, which can affect cooling efficiency and humidity control in the crisper area.
Fix a refrigerator that won't cool or has no power with this control board assembly. Solves temperature control issues and electrical failures.
This guide assembly is a chassis alignment and support piece that helps hold and position internal TV components for proper fit and operation. Replacing a damaged guide restores secure mounting and reduces panel or board movement. What it does:
Replaces worn or broken slide rail that supports refrigerator drawer movement. Restores proper alignment for smooth, quiet gliding along the track.
This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:
Rail guide assembly for refrigerator or freezer drawers. Guides and supports the slide rail for smooth drawer movement. Replace if worn, cracked, or broken.
This rail guide assembly supports and guides a refrigerator drawer as it opens and closes. Replacing a worn or damaged rail restores smooth sliding, proper alignment, and reliable closure to help maintain a consistent seal and temperature.
Replace your worn freezer door gasket to restore an airtight seal. Keeps cold air in, reduces frost buildup, and maintains stable temperatures. Confirm fit with your model number before ordering.
Decorative handle trim cover for bottom-mount refrigerators. Installs over the door handle assembly. Replace if cracked, discolored, or missing.
Decorative handle trim cover for your refrigerator door. Replaces cracked, discolored, or missing handle trim pieces. Restores appearance and finish.
Cosmetic trim piece that conceals and protects the door hinge area on bottom-mount refrigerators. Replace if cracked, broken, or missing for a finished look.
Covers and protects the refrigerator door hinge area. Replace if your hinge cover is cracked, broken, or missing to restore a clean appearance.
This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.
Refrigerator door gasket seals the door to maintain temperature and prevent air leaks. Replace when worn, cracked, or not sealing properly. Confirm fit.
Door gasket creates an airtight seal to keep cold air in and warm air out. Replace if torn, cracked, or no longer sealing properly. Confirm fit by model.
The Mullion Flipper Assembly is an OEM part for LG refrigerators. This assembly, located between the refrigerator doors, helps seal the space between the doors when they are closed, improving energy efficiency by preventing cold air from escaping.
Causes of a bad mullion flipper assembly can include wear and tear over time, damage from frequent opening and closing of the doors, or issues with the hinges and connectors that secure it in place. A damaged or malfunctioning mullion flipper can lead to temperature inconsistencies and increased energy usage.
Symptoms of a bad mullion flipper assembly include:
This OEM LG part is also compatible with Sears/Kenmore models.
The Refrigerator Flipper Assembly is an OEM part for LG refrigerators. This assists in the smooth opening and closing of the refrigerator door. It ensures an airtight seal when the door is closed, preventing cool air from escaping and maintaining the refrigerator's internal temperature.
Causes of a malfunctioning Refrigerator Flipper Assembly can range from physical damage, such as cracks or breakage, to wear and tear from regular use.
Symptoms of a bad Refrigerator Flipper Assembly include:
This OEM LG part is also compatible with some Kenmore models.
Replacement door bin for refrigerator storage. Installs on the door to organize bottles, jars, and condiments. Replace if cracked, broken, or damaged.
Replacement door basket assembly for refrigerator doors. Holds condiments, bottles, and small items. Order when your bin is cracked, broken, or damaged.
Door basket assembly installs in refrigerator door to organize condiments, jars, and bottles. Replace if cracked, broken, or missing for proper storage.
Interior door basket assembly for refrigerators. Mounts inside the door to organize condiments, beverages, and small items. Replace if cracked or broken.
Door stopper assembly cushions and limits refrigerator door travel. Replaces cracked, broken, or worn stoppers causing misalignment or door slamming.
Door stopper assembly for bottom-mount refrigerators. Installs on door to limit opening angle and prevent damage. Replace if cracked, broken, or missing.
Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.
Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.
Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.
Refrigerator door handle assembly that mounts to the exterior door. Replace this handle if yours is cracked, broken, damaged, or no longer secure.
Drawer rail holder for bottom-mount refrigerators. Secures drawer slide rails to the cabinet. Replace if cracked, broken, or missing to restore drawer support.
Plastic rail holder that secures shelf rails inside your refrigerator. Replace this holder if it's cracked, broken, or missing to restore proper shelf support.
This slide rail is a replacement drawer guide that restores smooth, stable drawer movement and helps prevent binding or sagging. Designed to match the OEM fit so drawers open and close reliably. What it does:
Supports and guides refrigerator drawers for smooth gliding. Replace when worn, broken, or causing binding. Confirm fit with your model number.
Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.
Specialized spanner tool for turning slotted nuts and collars on refrigerator components. Replace if lost, worn, or damaged to safely adjust fittings.
Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.
Refrigerator mullion door won't close or seal properly? This spring operates the center divider flapper door. DIY-friendly installation in 5 minutes.
Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.
Right side upper hinge.
Ice freezing in holder or chute not opening fully? This ice dispenser door seals the chute to prevent frost buildup and air leaks. Easy DIY repair.
This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:
Ice chute door not opening fully? This dispenser door link connects the actuator to the door for smooth operation. Simple DIY fix for binding doors.
This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.
Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.
If your refrigerator dispenser paddle is cracked, loose, or won't spring back, this lever restores reliable push-button operation and user control.
Fix water pooling or leaks inside your refrigerator with this water funnel. Directs water flow to prevent drainage issues. Easy DIY repair in minutes.
This is a small plastic push-button lever located on the refrigerator's display or control panel. It serves as a mechanical actuator that registers user input when pressed, allowing you to select settings or activate functions. Replace this part if the button feels stuck, broken, or no longer responds when pressed.
Fix a refrigerator door that won't latch or a control that doesn't respond. This lever button restores push-button function in 15 minutes or less.
Replaces cracked, scratched, or discolored display cover on your refrigerator control panel. Protects buttons and display while restoring a clean appearance.
Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.
Fix refrigerator not cooling or freezing issues with this evaporator coil assembly. Restores proper temperature control. Moderate DIY repair, 1-2 hours.
A PTC thermistor assembly that senses temperature and provides the control board with accurate temperature feedback to help regulate heating and cycling. Replacing a faulty thermistor restores reliable temperature monitoring for safe, consistent operation. What it does:
Refrigerator not cooling and compressor is warm? This overload protector prevents compressor damage during electrical overloads or overheating.
This PTC cover is the protective housing that shields a PTC sensor/assembly from debris and physical damage, helping maintain reliable sensor performance and prolong component life in the appliance. What it does:
Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.
Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.
This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.
This customized pin is a precision fastener that serves as a pivot or locating point within your appliance. It helps keep mating parts aligned and moving smoothly. Replace a bent, worn, or missing pin to restore proper operation. What it does
Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.
This noise damper reduces vibration and rattling sounds from refrigerant lines in your refrigerator. It cushions the copper tubing against the cabinet to prevent metal-on-metal contact that creates annoying noises. Install this damper if your refrigerator makes clicking, rattling, or vibrating sounds, especially when the compressor cycles on and off.
Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.
Refrigerator drip tray that collects water and condensation beneath the appliance. Replace if your drip tray is cracked, warped, or missing.
This condenser assembly replaces the condenser wiring and support used in compatible refrigerators to restore proper condenser connections and airflow. It helps re-establish electrical routing and secure mounting so the cooling system can run reliably. What it does:
Frost buildup affecting cooling? This refrigerator defrost heater melts ice from evaporator coils to restore efficiency. Moderate DIY repair.
Fix a refrigerator that won't turn off the light or runs constantly with this door switch magnet. Works with reed switches. Simple DIY replacement.
Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.
The MOTOR, DC is an OEM part for LG refrigerators. It is a direct current electric motor responsible for operating components related to cooling and airflow, such as the condenser fan and cooling fan. Efficient airflow circulation is critical for pulling heat away from refrigerated compartments and maintaining even temperatures throughout the fridge.
Causes of a bad motor can include excess dust buildup over time inhibiting proper fan rotation, worn motor brushes, or damaged motor windings affecting current flow.
Symptoms of a bad direct current motor include:
Replace yours today with this genuine OEM LG part to restore optimal cooling performance. This OEM LG part is also compatible with Sears/Kenmore.
A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:
What's included:
Install notes:
Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.
Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.
The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer.
Symptoms of a bad Ice Dispenser Door Motor include:
Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.
This OEM LG part is also compatible with Sears/Kenmore.
Fix unresponsive controls or features that won't activate with this refrigerator push button switch. Simple replacement restores button functionality.
Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.
LED light assembly for refrigerators. Installs in fresh food or freezer compartment. Replace if cracked, dim, or non-functional lighting module.
Replaces cracked or yellowed interior light lens. Protects bulb from moisture and impact while ensuring even illumination. Verify fit by model number.
This run capacitor provides the continuous electrical boost needed to keep the refrigerator's compressor motor running efficiently. It stores and releases energy to maintain the proper phase and voltage for the compressor during normal operation. Replace this capacitor if the compressor struggles to start, hums without running, shuts off intermittently, or if the refrigerator stops cooling altogether.
Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.
Fixes refrigerator power loss, sparking, or intermittent operation. This power cord assembly restores safe electrical connection from wall outlet to appliance.
This is the condenser fan motor assembly located near the compressor at the back or bottom of the refrigerator. It draws air across the condenser coils to dissipate heat and keep the refrigeration system running efficiently. Replace this motor if the refrigerator is running warm, the compressor is overheating, or you no longer hear the fan running when the compressor is on.
Fix a refrigerator that won't cool, has no display, or won't power on. This power control board assembly restores electrical function and system control.
Fix a refrigerator that won't cool, has no display, or won't respond to controls. This main control board restores power distribution and function.
If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.
Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.
Dim or uneven refrigerator lighting? This interior light cover assembly shields the bulb and diffuses light evenly. Simple 5-minute snap-in repair.
Ice maker stopped working or producing misshapen ice? This complete assembly replaces a faulty ice maker. Moderate DIY repair, about 1 hour with basic tools.
This is the motor that drives the auger inside the ice dispenser chute of a refrigerator. It rotates the auger to push ice from the storage bin through the dispenser opening when the lever or button is activated. Replace this motor if ice is not dispensing, you hear a humming sound but the auger doesn't turn, or the dispenser motor has stopped working entirely.
Fix temperature fluctuations or inaccurate readings with this refrigerator sensor control board. Manages temperature sensors for proper cooling control.
The Temperature Sensor is an OEM part for LG refrigerators. Also known as a thermistor, is responsible for sensing the temperature changes and providing the necessary feedback to the refrigerator's control board. It helps maintain accurate and consistent temperature levels, ensuring optimal food preservation and efficient cooling.
Causes of a faulty temperature sensor can include wear and tear over time, damage due to electrical issues or exposure to extreme temperatures, or sensor calibration issues. These factors can result in temperature inconsistencies, inaccurate readings, or improper cooling performance of the refrigerator.
Symptoms of a bad temperature sensor may include:
This OEM LG part can also be used on Kenmore/Sears appliances.
Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.
Ice maker not producing ice or auger not dispensing? This ice maker and auger motor assembly restores automatic ice production and dispensing function.
Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.
Leaking water line connections? This inline tube connector joins two sections of tubing for a secure, leak-resistant seal. Quick 10-minute fix.
Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.
Refrigerator not cooling or leaking water? This valve assembly pipe routes water between valve components. Fixes leaks and restores water delivery.
Located in the left refrigerator door on french door models.
Plastic cover cap for refrigerators. Snaps onto hinges, handles, or shelving brackets to conceal mounting hardware. Replace when cracked or missing.
Fix loud jackhammer sounds or weak water flow from your refrigerator dispenser. This filter head assembly houses the water filter inside the fridge.
Allows water to flow directly to your dispenser and ice maker without filtration. Install when choosing not to use a water filter. Confirm fit by model.
Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.
Covers and protects refrigerator tubing inside the cabinet. Replace this tube cover if the original is cracked, broken, or missing to restore proper appearance.
Refrigerator pipe holder bracket secures water lines and tubing in place. Replace if cracked, broken, or missing to properly support pipes inside your fridge.
This replacement pipe holder secures a small appliance pipe or tube in place, reducing movement and vibration to help prevent noise, wear, or accidental disconnection. It restores proper routing and support for the pipe. What it does:
Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.
Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.
Seals the ice bin compartment to prevent warm air and moisture intrusion. Replace when worn or torn to reduce frost buildup and ice clumping.
Seals the refrigerator door to keep cold air in and moisture out. Replace when worn or deformed to restore proper cooling and reduce frost buildup.
This lever cover is a molded trim/protective piece that fits over a user-operated lever on the appliance. Replacing a damaged or missing cover helps protect the mechanism and restores a clean, finished appearance. What it does: