Need Help?
Call
Regulates gas flow from the supply line to your range burners. Replace if cracked, leaking, or damaged to restore proper fuel control and flame size.
Replaced the regulator with part #AP5802175. Watched the video when purchasing, and it was spot on. Would have taken me about 15-20 minutes if I had access to a vise, to remove one of the fittings. Was able to get it out using two wrenches, but it was not without a bit of elbow grease. The new part went in easily. Turned on valve on regulator, plugged in the power, turned on the gas valve, done. Everything worked fine. Easy job for anyone with just a few tools. Read more
Black touch pad overlay for range control panel. Replaces cracked, worn, or peeling overlays with faded labels. Installs directly over control board.
After checking all connections to ensure power was getting to element. I ordered new control board and replaced it myself. Saved about $100.00 on a service call for someone to come out and replace it Read more
This is a 3000-watt bake element that mounts in the bottom of the oven cavity. It provides the primary heat source for baking and roasting. Replace this element if the oven is not heating properly, food is undercooked, or the element shows visible damage such as cracks, blistering, or burn-through spots.
Replaced the oven heating element Read more
Fix slow preheating or uneven baking with a new bake element. This heating component generates consistent heat throughout your oven cavity. DIY-friendly repair.
I replaced the bake element in the bottom of the unit. Read more
Protective panel lining the bottom of your oven cavity. Replace if cracked, warped, or rusted from heat exposure and spills. Provides smooth surface.
I did research on my own prior to ordering. I looked at other sites, but was impressed with the online chatting-this was very helpful! I ordered three items and had difficulty with one rack. I called customer service and received a new rack the next day. This was meaningful to me because we were heading back home in a few days. The rep was very understanding to my situation and helpful. Read more
Controls gas flow to your range oven burners. Replace if the valve is leaking, won't shut off completely, or has damaged threads or connections.
Repair man said that the part alone would cost more than $300.00. I checked it out on YouTube and saw that the actual replacement was an easy task. I contacted appliancepartspros.com and spoke to Wendy, who sorted me out with the correct part which arrived in two days ($115.00). It took me less than 15 minutes to replace the part, no more leak. Thanks appliancepartspros.com and Wendy for your cost effective and speedy service. Read more
This black burner cap sits on top of the 14,000 BTU surface burner on a gas range or cooktop, distributing the flame evenly around the burner head. It is essential for proper flame pattern and efficient heating. Replace this cap if it is cracked, warped, heavily corroded, or if the burner flame appears uneven or yellow.
Ordered replacement parts Read more
Halogen light bulb illuminates your microwave or oven cavity. Replace when light dims or burns out after extended use. Confirm fit with model number.
I researched on the net, ordered the part, it arrived the next day. Took about 45 minutes to replace. Fairly easy fix. Read more
The Burner Valve is an OEM replacement part for Whirlpool gas cooktops and ranges. Each burner valve controls the flow of gas to its corresponding surface burner element. Causes of a bad burner valve can include wear and degradation of internal mechanisms from years of continuous heating cycles. Mineral or debris buildup restricting gas flow is also possible. Symptoms of a bad Burner Valve include:
This OEM Whirlpool part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Ordered correct replacement parts (your online form helped to identify correct valves 2 had black dot on inside stem for back small burner 1 had red dot for larger front burner). locked stove, turned off gas, unplugged cord. removed knobs, 5 screws and front plate also removed L shaped plate below knobs for better access to comp. fittings. pulled off ignitior controls loosened compression fittings (hard to get wrench on nut but doable), removed screw holding valve to manifold. reversed order... Read more
Oven not broiling or heating unevenly? This broil element provides direct heat at the top of your oven. DIY-friendly repair restores proper broiling.
I ordered a new one Read more
Replaces the inner heat-resistant glass panel in your oven door. Needed when glass is cracked, shattered, or broken during cleaning or use.
Replaced it myself. Read more
This is a 12-inch radiant surface heating element designed for use on a glass-top electric range or cooktop. It sits beneath the glass surface and radiates heat upward to cook food evenly on the corresponding burner zone. Replace this element if the burner fails to heat, heats unevenly, or does not reach the correct temperature when turned on.
Replaced the element. 1st- Turn off the power to the appliance. The cook top is held on with two screws - access the screws by opening the oven door. Cooktop is hinged, so just pull up near oven door and hold in place with, say, a three foot long stick. The elements are held in place by bracket attached to the cooktop. Remove the bracket by removing the two socket screws. The element is aligned to the bracket with three locking tabs. Remove the tabs with pliers. I broke off one the... Read more
Replace your electric range oven door seal when compressed, frayed, or heat escapes. Maintains temperature for efficient cooking. Verify fit by model.
Removing was easy. Pull out the ends of the seal, the ends aren't locked in. Then, pull up on each retaining clip. Each clip is held in with spring tension. Reinstallation was easy too. Start on one end, Twist frayed end into cone-like shape and insert into one of the holes for the seal. Push in with a skewer/screwdriver. Insert first clip into the first hole. Go around in a linear fashion, inserting each clip into each hole. After the last clip is pushed in, twist the end of the frayed end... Read more
Burner stuck on high heat or won't regulate temperature? This infinite switch restores precise control. Straightforward DIY repair with a screwdriver.
Took out the old part and installed the new one. Read more
This is a fixed high-limit thermostat used in ranges and ovens to monitor internal temperature and cut power to the heating element if the oven exceeds a safe operating temperature. It acts as a safety device to prevent overheating and potential fire hazards. Replace this thermostat if your oven is not heating at all, shuts off prematurely, or if you have confirmed a lack of continuity through the component with a multimeter.
Replaced the thermst-fix and the thermal fuse oven now works great Read more
Replace your burned-out range light bulb to restore interior illumination. Swap in when bulb fails to see contents clearly. Verify fit by model number.
I just plugged in a replacement light bulb. Couldn't find one anywhere else but from you folks. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.