Ikea Dishwasher Parts

This adjustable leveling leg threads into the appliance base to set height and stabilize the cabinet. Replacing a worn or missing leg helps stop rocking and vibration and helps maintain proper alignment for reliable operation.

• Provides adjustable support at one corner of the appliance
• Helps level the unit for correct alignment with floor or cabinetry
• Reduces rocking, vibration, and rattling noises
• Replaces stripped, bent, cracked, or missing leg

• Disconnect power and, if applicable, shut off water before servicing
• Carefully support or brace the appliance to access the base safely
• Start the new leg by hand to avoid cross-threading; adjust height gradually
• Use a level to check side-to-side and front-to-back, then recheck after positioning

Cooktop burners not heating? A blown thermal fuse cuts power to prevent overheating. Test for continuity and replace to restore heating function.

This small check ball sits inside the dishwasher's drain pump or water inlet valve and acts as a one-way valve to prevent water from flowing backward through the system. It ensures water moves in the correct direction during wash and drain cycles. Replace this part if you notice water draining back into the tub after a cycle completes, the dishwasher isn't draining properly, or water is leaking from the pump area.

This replacement dishrack restores secure loading and proper spacing so wash water reaches every item. Replacing a bent or rusty rack helps prevent tipped dishes and marks from flaking rust, and keeps loading/unloading smooth when the rack rollers are intact.

• Holds plates, bowls, and cups in place during wash and rinse cycles
• Maintains spacing for spray coverage and drying airflow
• Rolls in and out along the rails when paired with functional rack rollers
• Common symptoms include broken or bent tines, flaking coating or rust, items tipping, or difficulty sliding the rack

• Disconnect power to the dishwasher before servicing
• Open the door, pull the rack forward, release rack stops/end caps if present, and slide the old rack off the rails
• Transfer any reusable accessories from the old rack to the new rack as required by your model
• Slide the new rack onto the rails, reinstall rack stops, and verify smooth travel before running a cycle

Dishwasher won't heat, cycle, or start? A failed control board disrupts heating, wash cycles, and dispenser timing. Moderately challenging DIY repair.

Color: Stainless   Note: Comes with Allen wrench, spare set screw, and instructions.

This Electronic Control Board is the appliance's central control module. It interprets inputs from sensors and switches and directs power to motors, valves, heaters, and fans to run cycles reliably when the original board has failed.

• Manages overall operation by processing signals and executing programmed cycles
• Sends power/commands to components such as motors, pumps, fans, heaters, and valves
• Typical symptoms of a failed board: no power or won't start, unresponsive controls, cycles that won't advance, intermittent shutdowns, or error codes
• Useful when diagnostics point to control failure after ruling out fuses, switches, sensors, and wiring

• Disconnect power before servicing; turn off water supply if applicable
• Use ESD protection and handle the board by its edges
• Photograph/label all connectors; move harnesses one at a time and transfer any jumpers/settings from the old board if present
• Mount securely, reconnect wiring, reassemble, then run the unit's diagnostic/self-test per the service manual

Replacement lid for dishwasher silverware basket. Restores the basket cover if the original is cracked, broken, or missing. Ensures proper operation.

Replace the left-side lid for your dishwasher silverware basket if cracked, broken, or missing. Covers and secures utensils during wash cycles.

This silverware basket is a dishwasher utensil caddy that organizes forks, knives and spoons so cutlery cleans evenly and stays contained during the wash cycle. It fits into the lower rack and helps prevent items from shifting. What it does:

• Holds and separates silverware and small utensils for better cleaning and safer handling
• Keeps loose items from falling into the wash area or blocking the spray arms
• Snaps into the lower dishwasher rack to stay secure during cycles
• Works with standard dishwasher racks that accept a removable utensil caddy

• One silverware basket

• Place the basket into the lower rack and align so it sits securely in the rack slots
• No tools required for standard installation; handle with care to avoid sharp utensils
• Inspect for broken tabs or clips before installing; damaged mounting points can allow the basket to shift
• Clean periodically to remove food buildup and prevent odors

This black door handle mounts to the front of the dishwasher door and is used to open and close the unit. It attaches with screws or clips and provides the grip needed to latch and unlatch the door. Replace this handle if it is cracked, broken, loose, or if the mounting points have become damaged.

This is a stainless steel door handle kit for a dishwasher. It attaches to the front of the dishwasher door and provides a grip for opening and closing the unit. Replace this handle if it is cracked, discolored, loose, or broken, making it difficult to properly open or secure the dishwasher door.