Inglis Washer Parts

The Washer Pump Assembly, Drain, is an OEM part for Whirlpool washing machines. This component is essential for removing water from the washer tub during the drain cycle, ensuring that clothes are properly rinsed and spun dry.

Common causes of a bad drain pump include blockages from lint, debris, or foreign objects, wear and tear from regular use, and electrical issues such as a burned-out motor. These problems can prevent the pump from effectively draining water.

Symptoms of a bad drain pump assembly include:

• Washer not draining properly or at all
• Unusual noises during the drain cycle
• Water left in the washer after the cycle completes
• Error codes related to drainage issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator is an OEM replacement part for Whirlpool top-loading washing machines. Situated vertically at the center of the wash basket, this post facilitates rotation and cyclonic movement of clothes during cycles.

Causes of an impaired agitator include cracking at mounting points allowing excessive wobble or detachment from the central drive shaft over multiple years of use. Mineral buildup can also scale components making smooth operation difficult.

Symptoms involve:

• Uneven wetting and inadequate oscillations leave clothes soiled
• Excessive vibrations and noise from an off-center agitator
• Inability to properly distribute detergent throughout the load

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

The Latch is an OEM replacement part for Whirlpool washing machines. This component ensures the washer's door or lid is securely closed during operation, preventing water spillage and ensuring the safety of the user by halting operation when opened.

Causes for a malfunctioning Latch can include mechanical wear from frequent use, damage from forceful closing or opening, or electrical issues affecting its signaling capability to the washer's control system.

Symptoms of a bad Latch include:

• The washing machine's door or lid not closing securely
• The appliance not starting or pausing mid-cycle due to latch issues
• Error codes or indicators signaling latch or door problems
• The need for excessive force to open or close the door or lid

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator is an OEM part for Whirlpool washing machines. It is a crucial component that provides the mechanical action necessary for effective cleaning during the wash cycle. The agitator spins, agitating the water and clothes, creating the friction and motion required to remove dirt and stains.

Causes of a bad agitator can include wear and tear from prolonged use, damage due to impact or foreign objects getting caught in the agitator, or issues with the agitator's coupling or connection to the transmission system.

Symptoms of a bad agitator include:

• Inadequate or ineffective washing performance
• Excessive noise or grinding sounds during the wash cycle
• Leaks or water spillage due to a damaged agitator seal
• Visible cracks or damage to the agitator structure

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Fabric Softener Dispenser is an OEM replacement part specific to  Whirlpool washing machines. It is responsible for accurately dispensing the appropriate amount of liquid fabric softener during the rinse cycle to soften and protect clothes. 

Causes of a bad fabric softener dispenser can include clogging of the dispenser or dispensing mechanisms from residue buildup, cracks or openings in the plastic housing allowing for leaks, broken or malfunctioning electronic components controlling the dispensing process.

Symptoms of a bad fabric softener dispenser include:

• Improper dispensing of fabric softener resulting in excess or insufficient softener  
• Leaking or dripping of softener from the dispenser housing
• The dispenser door or lid not opening or closing properly
• Liquids dispensing at the wrong times during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Internal Drain Hose is an OEM replacement part for Whirlpool washing machines. It routes used wash water from the tub to an external drain source. 

Causes of a faulty internal drain hose can include cracks developing from constant use or obstructions blocking effective drainage.

Symptoms of a bad internal drain hose include: 

• Water leaks inside or around the base of the washer
• Incomplete drainage of water at the end of cycles  
• Accumulation of dirty water inside the machine

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Knob is an OEM replacement part for Whirlpool washers and dryers. The control knob lets you control cycle settings. Remove the knob by pulling it straight off its post.

Causes of a bad knob can include wear and tear over time resulting in loose or unstable function, cracks or chips in the plastic housing, or damage due to impact or abuse during removal from the post.

Symptoms of a bad knob include:

• Difficulty rotating or selecting settings
• Settings that do not stay in place after selection
• Cracked or broken knob housing
• Knob constantly moving out of the desired setting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Drain Hose is an OEM replacement part for Whirlpool washing machines. Located at the rear base of the unit, this flexible vinyl hose routes wash water out of the tub and to household drainage pipes.

Causes involve regular flexing weakening hose material integrity over many years. Mineral buildups may also restrict water flow within.

Symptoms of a problematic drain hose include:

• Puddles or residual water remaining after cycles
• Slow drainage of water not meeting cycle timers
• Hose material cracks or splits exposing reinforcement

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This pulley cover encloses the drive belt and motor pulley at the base of the appliance. It protects moving parts from debris and contact, helping reduce noise and wear when the original cover is cracked, warped, or missing.

• Covers the drive belt and motor pulley to keep out dust and debris
• Helps prevent foreign objects from contacting moving parts
• Restores proper clearance to reduce rubbing or scraping noises
• Common signs it's needed: cracked/missing cover, rattling from the base, visible rub marks on the cover or belt

• Disconnect power and, if applicable, shut off water supply before servicing
• Access the underside per your service manual; support the unit securely if tilting
• Reuse existing mounting screws; do not overtighten to avoid damaging the plastic
• Rotate the belt/pulley by hand after installation to confirm free movement and no contact

The Water Pump is an OEM replacement part for Whirlpool washing machines. It plays a crucial role in circulating water throughout the wash cycles and draining the used water from the tub.

Symptoms of a bad water pump include:

• Washer not draining properly, leaving standing water in the tub
• Loud grinding or humming noises during the spin or drain cycles
• Leaks around the pump or connected drain hose
• Error codes or indicators related to drainage or pump issues

Causes of a bad water pump can include clogs or obstructions in the pump impeller, worn-out pump seals or bearings, or electrical malfunctions preventing the pump from operating correctly. Foreign objects or debris can also contribute to pump failure.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Capacitor is an OEM replacement part for Whirlpool washers. This capacitor regulates and distributes the electrical current throughout the washer. It powers the motor and other electrical components, allowing them to function properly.

Over time, heavy usage and normal wear and tear can cause degradation of the capacitor.

Symptoms of a bad capacitor include:

• The washer fails to agitate or spin during the wash cycle
• Abnormal sounds coming from the motor area
• Lights or control panel not working properly
• The washer fails to start or run at all

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Includes screws and wire connectors. For the complete terminal block kit use 279320.

This lid lock bezel is the plastic trim that mounts on the washer's top panel around the lid lock. It supports and protects the lock opening so the latch aligns correctly and the area looks clean and finished.

• Provides mounting/trim for the lid lock/switch assembly on the top panel
• Helps keep the lock aligned with the lid strike for reliable engagement
• Replaces cracked, broken, or missing bezel that leaves the lock loose or exposed
• Common signs include a loose or wobbly lock, difficulty latching the lid, or cosmetic damage around the lock opening

• Disconnect power and water supply before servicing
• Access the top panel (release spring clips or remove screws per model)
• Remove screws securing the lid lock, lift out the old bezel, position the new bezel, and reinstall the lock using existing fasteners
• Test operation before reassembly

The Water-Level Pressure Switch is an OEM part for Whirlpool washers. It is responsible for monitoring the water level inside the washer's tub during different cycles. This switch detects changes in air pressure as the water level rises or falls, communicating these variations to the washer's control board. 

Symptoms of a faulty water-level pressure switch include:

• Incorrect water levels during the wash cycle
• Washer not filling or draining properly
• Error codes related to water level

A bad water-level pressure switch can occur due to various factors, such as clogs or blockages in the air hose, a malfunctioning switch mechanism, or electrical issues. If you notice problems such as the washer not filling or draining properly, water levels that are too high or too low, or error codes related to water level, it may be time to replace the water-level pressure switch.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This bleach dispenser for a washing machine holds liquid bleach and releases it into the tub at the appropriate point in the cycle, helping dilute bleach and protect fabrics from contact with undiluted solution. What it does:

• Holds and meters liquid bleach until the machine calls for dispensing
• Helps ensure bleach mixes with water for even, diluted distribution
• Replace if cracked, clogged, or leaking
• Common symptoms include bleach not dispensing, bleach left in the cup, leaks around the dispenser area, or bleach spots on fabrics

• 1 bleach dispenser

• Disconnect power and turn off water before servicing
• Access and mounting vary by model; follow your service manual to reach the dispenser
• Detach hoses/clamps or fasteners, transfer any reusable hardware, and seat the new dispenser fully
• Reconnect, then run a test fill/rinse to check for proper dispensing and leaks

This part is a genuine OEM replacement drive motor. It is intended to replace a broken or faulty motor in various washers.This motor drives the washing machine, allowing the drum to rotate and agitate when the user selects the desired settings. Over time, the motor might become worn or start to malfunction, requiring immediate replacement. Before starting the repair process, unplug the appliance from the power source and check the resistance running through the motor windings using a multimeter. If the meter measures infinite resistance, the drive motor will definitely need to be replaced. Work gloves should be worn to prevent injury.This part has been made by Whirlpool and has been sourced directly from the manufacturer. This part is made out of high-quality, durable, non-corrosive materials to ensure high quality and is sold individually. It is compatible with washing machines manufactured by Whirlpool, Maytag, Jenn-air, and various other brands.