Kenmore / Sears Cooktop Parts

Second repair after 10 years of service - igniter had cracked and spill overs were causing the others to misfire. This was a two-step process. I took apart the cooktop to see what parts were neded. Screws were all rusted, I had to drill ome out. The burner gaskets broke during the process and needed replacement. One of the burners had deformed due to excess heat. After that initial diagnose, I reassembled the cooktop without the igniters and ordered all the parts I needed. The second stage was... Read more

In the middle of Christmas baking, I noticed that it was taking a really long time to bake bread. Since I had already done 5 batches and the timing was always the same, I knew when I had to add 20 min, something was wrong. My oven thermometer (I bought at target) no longer worked so it was hard to tell the exact temperature. First, I went and bought a new thermometer to see the actual temp, then I set the oven to 350 degrees and checked to see what the thermometer was showing. It was almost 50... Read more

Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site. Read more

Replace the burner part that was broken. Read more

I ordered 7 new lens caps to replace them all. Took ten minutes to fix. Read more

Installed it according to video watched. Read more

Removed door. Viewed You Tube video. Trial and error. . Read more

Oven part was hard to fix as space was very small, it took longer than even you tube video said it would Read more

Removed side moldings top molding and glass, removed broken handle. Reinstalled new handle, all modings and glass. Read more

I was able to clean the Oven Temp Sensor with 99% alcohol. Then replaced All switches (after breaker was isolated). Put it all back the way I found it. Turned on breaker. Tested all functions and had no reports of Fan Code re-appearing since. Read more

Replaced the old valve with a new one from AppliancePartsPros.com. I watched one of the YouTube videos to get an idea of what the process would entail. I gathered the tools I would require, plus a work light. The repair/replacement went pretty good. One thing the video I watched didn't cover was adjusting the valve for a propane system. I compared my old valve to the new one and saw that I would have to screw down the oven gas outlet until it "bottomed out". Read more

Only the lower element was burned out, but I opted to replace both. Ordered from AppliancePartsPros and received them very quickly! A few screws, unplug and plug in the new elements, replaced the screws, and DONE! This has to be one of the easiest repairs a homeowner can do. Thanks, AppliancePartsPros for carrying the original equipment parts and providing the fast shipping! Read more

Unplugged the stove, unscrewed the mounting plates from the back unsnapped the wires then revered the procedure to install new one. Read more

When the element on our 15 year old builder grade oven went out we were worried it was time to spend thousands on a new oven. Instead, we found the replacement part on appliancepartspros.com and decided to give replacing it a shot, after all it was $80 instead of $1600. We weren't entirely sure the replacement was the right part because our oven model had an extra "0", but given it came up when I searched for the oven model (if not on the compatability checker) and the refund guarantee we... Read more

Searched internet for answers. Decided to replace the door switch. Drier now runs great! Read more