Kenmore / Sears Door, Door Glass & Parts

This replacement oven door window glass restores a clear view into the cavity and the integrity of the door assembly. Install a new pane when the original is cracked, shattered, or permanently stained to maintain safe viewing during cooking.

• Provides the transparent viewing panel in the oven door
• Helps restore door integrity when used with existing trim and gaskets
• Replace for visible cracks, chips, shattering, or persistent staining/cloudiness
• Resolve rattling or loose window conditions

• Disconnect power and allow the oven to cool completely
• Remove the door and place it on a padded surface
• Wear cut-resistant gloves and eye protection; handle glass edges carefully
• Transfer any trim/brackets from the old pane; avoid overtightening fasteners and clean fingerprints before reassembly

This is a single piece of glass, you must reuse the window frame.

Replacement glass panel that restores visibility and helps protect internal components for compatible Frigidaire appliances. Use this glass to replace cracked, chipped, or shattered panels and return your appliance to safe, usable condition. What it does:

• Replaces broken or damaged glass panels used on the appliance door, shelf, or panel area.
• Stops loose shards and visible cracks that can cause safety concerns or interfere with normal use.
• Restores clear visibility through the door or panel.
• Helps prevent further damage to internal components by replacing compromised glass.

• Disconnect power and unplug the appliance before beginning any repair.
• Handle with care and wear cut-resistant gloves and eye protection; glass edges may be sharp.
• May require partial disassembly for removal and installation—follow OEM instructions.

This replacement oven door glass panel restores safety and visibility to your range or wall oven. Replace cracked or shattered glass to maintain the door's insulating barrier and a clear view of your cooking without replacing the entire door. What it does:

• Serves as one pane of the oven door window for viewing the oven cavity
• Helps maintain proper door integrity and heat containment when used with the other panes
• Replace if the original glass is cracked, chipped, shattered, or missing
• Can resolve cloudiness or staining isolated to a damaged pane

• One glass panel

• Disconnect power or turn off gas and allow the appliance to cool completely
• Wear cut-resistant gloves and eye protection; handle the new glass by the edges
• Remove the door and disassemble the door stack; retain and reuse existing trim and fasteners
• Clean out all glass fragments before reassembly and avoid overtightening hardware

This is the replacement glass panel for the oven door. It restores a clear viewing window and proper door integrity when the original pane is cracked, shattered, or otherwise damaged.

• Forms the heat-resistant viewing window within the oven door assembly
• Helps maintain proper oven temperature by sealing the door window area
• Replace if the glass is cracked, shattered, missing, or visibly damaged
• Address heat loss and safety concerns related to a broken door pane

• Disconnect power and allow the appliance to cool completely before service
• Wear cut-resistant gloves and eye protection when handling glass
• Remove the door and disassemble on a padded surface; note pane orientation and seals
• Do not overtighten fasteners on reassembly; uneven pressure can crack the glass

Plastic door cover

This outer door panel replaces a damaged or scuffed microwave door exterior in the Graphite finish, restoring a clean look and proper fit of the door assembly so the handle mounts securely and the door opens and closes smoothly.

• Forms the visible exterior of the microwave door and supports the handle mounting points
• Helps maintain proper door alignment for smooth opening/closing and latch engagement
• Replaces panels that are cracked, warped, or heavily scratched/dented
• Common symptoms include a loose handle mount, rattling outer frame, or cosmetic damage

• Disconnect power at the breaker or unplug the appliance before servicing
• If over-the-range, support or remove the microwave to a stable work surface for safe door service
• Separate the door halves, transfer the handle/trim as required, and install the new outer panel
• Ensure the door closes flush before restoring power

Inner door panel kit restores the refrigerator door interior, covering the cavity and providing mounting surfaces for bins and gaskets. Replacing a cracked or warped inner panel improves appearance and helps ensure door components fit correctly. What it does:

• Replaces a damaged, cracked, or warped inner door panel to restore the door's interior surface.
• Provides mounting surface for door bins, shelves and the door gasket so components sit securely.
• Helps cover and protect insulation and internal door wiring or components from damage.
• Common symptom fix: visible cracks, deep stains, loose door bins, or a warped liner that prevents proper gasket seating.

• Disconnect power to the appliance and remove food and loose items from the door before starting.
• Some disassembly of the door liner may be required; retain any fasteners, clips, and trim for reuse.
• Avoid damaging insulation, wiring, or the door gasket while removing and installing the panel.

The Range Glass Assembly is an OEM part for Frigidaire ranges. It covers the inner cooking cavity, protecting both the occupant and the heating elements and mechanisms inside. The glass assembly also allows for viewing into the oven to check on food without needing to open the door each time. 

Symptoms of a bad glass assembly include:

• Cracks or breaks in the glass
• Difficulty viewing into the oven cavity 
• Leaks around the glass seal
• The glass popping out of place

Causes of a bad glass assembly can be wear and tear over time, exposure to excessive heat, or damage from impacts. 

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This outer door glass replaces the damaged exterior glass on the appliance door to restore appearance and protect inner door components. Fits as the outer-facing glass panel used when the original glass is cracked, chipped, or clouded. What it does:

• Serves as the exterior glass panel on the appliance door, forming the visible outer surface.
• Protects the inner door liner, wiring, and controls from direct contact and debris.
• Restores the door's finished look when the original glass is scratched, cracked, or discolored.
• Allows safe viewing of the appliance interior where applicable without exposing internal parts.
• Prevents sharp edges and loose glass that can create a hazard.

• Disconnect power (and water, for washers) before beginning any repair; use proper lockout/tagout procedures.
• Handle glass with cut-resistant gloves and eye protection to avoid injury from broken or sharp edges.
• Removal typically requires detaching the door assembly and removing trim/retainers; keep track of screws and clips.
• Follow the appliance's service manual or OEM diagram for model-specific steps.

The Glass is an OEM part for Frigidaire freestanding ranges. It provides a durable transparent barrier that allows for viewing of contents inside the oven. The tempered glass door is both impact-resistant and heat-resistant, built to withstand repetitive use.

Causes of bad oven door glass include cracks or chips developing from accidental impacts, warping or discoloration from overheating, or scratches that won't wipe clean. 

Symptoms of a bad glass oven door include:

• Inability to safely or securely close the oven door  
• Reduced visibility into the oven cavity
• Potential safety hazards from cracked or compromised glass

This OEM Frigidaire replacement restores the door's integrity and functionality. It is also compatible with Electrolux, Kelvinator, and some Kenmore electric range models. 

This genuine OEM part is a oven door glass. The glass oven door assembly is the main oven door used to gain access to the interior of the oven. Over time a glass door assembly can become damaged due to excessive wear and tear. If the door is no longer shutting properly it might be time to replace it. Luckily replacing a glass door assembly is a fairly simple repair.To replace the door assembly, begin by unpluggin the oven. Once unplugged, open the damaged door assembly and locate the hinge brackets on the side of the door. Remove the screws from the mounting brackets. Once remove, gently lift the door off the hinges. Set to the side and place the new door directly on the hinges. Refasten the screws that secure the door, and close the new oven door. Make sure that it opens and shuts smoothly.This replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand ovens.

This clear glass shelf provides a sturdy, easy-to-clean storage surface for your refrigerator, helping keep food organized and visible. It restores usable shelving space when an original shelf is cracked, chipped, or missing. What it does:

• Supports food containers, plates and small appliances so items stay organized and level.
• Prevents spills and crumbs from falling to lower compartments; makes clean-up quicker.
• Replaces cracked, chipped or broken shelves that can cause items to shift or fall.
• Restores a proper storage surface when the original interior shelf is damaged or removed.

• Remove food and any loose items from the shelf area before replacing the glass.
• Handle with care and wear cut-resistant gloves; support the glass from underneath while sliding into place.
• Inspect shelf supports or rails for damage and position the glass evenly on the supports; do not force the shelf into misaligned rails.
• Refer to your appliance's owner manual or service guide for model-specific placement instructions.

Restore a safe, finished oven door with this replacement outer glass panel. It replaces a cracked or shattered front window, protecting the door assembly and letting you see your food without exposing insulation or sharp edges. What it does:

• Forms the front/outer pane of the oven door window
• Protects door insulation and inner glass from damage
• Helps contain heat within the oven when intact
• Common symptoms: visible cracks, shattered or missing pane, loose or rattling glass

• 1 outer oven door glass panel

• Disconnect power and allow the oven to cool completely before service
• Wear cut-resistant gloves and eye protection; glass edges can be sharp
• Removing the door from the hinges makes service easier; support the door to prevent damage
• Transfer any trim/brackets/nameplate from the old pane and reuse existing hardware as required

This is the factory glass assembly that restores a clear, intact viewing window on your appliance door. Replacing a damaged panel helps maintain safe operation and a clean, finished appearance.

• Replaces a cracked, shattered, or missing glass panel on the door
• Helps maintain proper door integrity and safe use
• Restores visibility into the cavity for monitoring cooking or baking
• Addresses rattling, loose, or sharp-edge conditions caused by broken glass

• Disconnect power and allow the unit to cool completely before servicing
• Wear cut-resistant gloves and eye protection; handle glass carefully
• Support the door during removal; keep track of screws and trim orientation
• Reassemble in the original order; do not overtighten fasteners

This is an outer glass door used in ovens. It is the outermost part of the door on the appliance. It helps hold together the other parts of the oven so it can operate correctly. This part is made of durable materials but can crack or otherwise become damaged.Before replacing the oven outer door glass, wait for the oven to cool completely. Make sure it is unplugged and/or the gas is turned off before beginning. A set of tools and work gloves will be useful for the process. The oven frame will need to be removed to replace the part. Remove the old outer door glass and replace it with the new part before reinstalling other components.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as a single part. The outer door glass is made to be used with ranges, stoves, ovens, and oven/microwave combination appliances by Kenmore, Frigidaire, and Crosley.