Kenmore / Sears Guard, Shield, Barrier Parts

This splash shield kit is an OEM replacement part that prevents water from spraying beyond the door seal in Frigidaire dishwashers. The kit measures 1.5 inches in length, 0.5 inches in width, and 1.7 inches in height.  This kit is located on the front lower corners of the dishwasher tub. If your dishwasher is leaking due to a damaged or worn-out splash shield, the kit provides a reliable replacement.

Symptoms of a bad splash shield kit include:

• Stains or mineral deposits on surrounding cabinetry   
• Puddles or drips developing outside the dishwasher tub 
• Reduced cleaning ability due to unredirected spray patterns
• Damage, cracks or missing sections of splash shielding 

Causes can be normal wear from extended use breaking down barriers over time. Proper shield alignment is needed to effectively direct spray inside the tub.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Refrigerator Door Shelf Bin Assembly is designed to enhance the functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit, providing additional storage space in the door compartment for your beverages, condiments, and other essentials. Made with durable materials, the assembly offers reliable performance and helps keep your items organized and easily accessible. By replacing a cracked or damaged shelf bin with this high-quality component, you can restore the efficiency of your refrigerator and maintain a tidy kitchen environment. The Refrigerator Door Shelf Bin Assembly is compatible with a range of Samsung refrigerator models, making installation straightforward and hassle-free. Investing in this genuine OEM part not only extends the life of your appliance but also enhances your overall user experience by optimizing storage and organization within your fridge.

The Hinge Brace is an OEM replacement part for Whirlpool dishwashers. It serves as a supportive bracket anchoring the dishwasher door hinge assembly firmly in place.Note: This part may be different from your original. If your original part was a flat plastic vapor barrier, the new design is a wire. It is a factory design change, the old design is no longer available.

Over time, the hinge brace can degrade due to constant use, heavy loads on the door, or accidental impacts. A faulty hinge brace can result in misalignment or difficulty in operating the dishwasher door.

Symptoms of a bad hinge brace include:

• Loose or unstable door that does not close securely
• Gaps appearing around the door seal during wash cycles
• Broken hinge components from added stress and tension on the door
• Difficulty fully opening or closing the dishwasher door

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Microwave Cooktop Lamp Glass Cover is an essential replacement part designed to restore the functionality and appearance of your microwave. This genuine OEM part ensures a perfect fit and seamless integration with your Samsung microwave, maintaining the quality you expect. Crafted from durable glass, the cover provides reliable protection for the cooktop lamp, allowing for consistent and clear illumination during use. Easy to install, this glass cover helps enhance your cooking experience by ensuring proper lighting within your appliance. By choosing the Microwave Cooktop Lamp Glass Cover, you benefit from improved visibility and a maintained aesthetic, keeping your microwave looking and operating like new. Whether your original cover is cracked, damaged, or no longer functioning, this genuine OEM part offers a straightforward solution to extend the life of your microwave and ensure optimal performance.

This factory shield is a protective panel used within the appliance assembly. It helps guard nearby components and maintain proper operation by directing heat, air, or moisture as designed. Replacing a damaged or missing shield restores correct fit and protection.

• Provides a protective barrier for internal components in the specified area
• Helps manage airflow/heat/moisture path as engineered for the system
• Replace if cracked, warped, missing, or not securing firmly
• Typical signs include visible damage, rubbing/rattling, or evidence of heat/moisture exposure near the shield

• Disconnect power; shut off gas/water if applicable before servicing
• Access the location per your model's service information
• Transfer and reuse original clips/fasteners as needed; do not overtighten
• Verify alignment and clearances before reassembly and testing

This replacement water tube routes water within the refrigerator's internal water system. Installing a fresh, intact tube helps stop leaks and restores reliable water flow to the dispenser and ice maker. What it does:

• Carries water between components such as the inlet valve, reservoir, dispenser, and ice maker
• Maintains a sealed, kink-free path for proper flow and pressure
• Common signs of failure: leaks or puddling, weak or no dispenser flow, ice maker not filling, brittle or discolored tubing

• One tube

• Unplug the refrigerator and shut off the water supply before servicing
• Note the original routing; take photos to match length and path
• If trimming, cut ends square and fully seat into the existing push-to-connect or compression fittings
• Restore water and check all connections for leaks before powering the unit back on

This canopy is a molded trim cover used on compatible microwaves. It finishes and protects the mounting area, helping shield components and restore a clean, secure appearance when the original cover is damaged or missing. What it does:

• Provides a finished look by covering exposed edges and fasteners on the microwave
• Helps protect underlying parts from grease, dust, and moisture
• Assists in keeping adjacent components aligned and secured
• Typical failure signs: cracks, broken/missing tabs, loose fit, rattling, or a missing cover

• 1 canopy

• Disconnect power to the microwave before servicing
• Note orientation; retain and transfer any screws or clips from the original part
• Handle plastic tabs carefully; do not overtighten screws to avoid cracking
• Support the assembly to prevent strain

This molded resin cover restores a clean, finished look while protecting the underlying assembly. Use it to replace a cracked or missing cover so components stay shielded and properly secured during normal operation. What it does:

• Shields internal components and provides a finished appearance for the covered area
• Helps keep dust, grease, and debris away from internal parts as designed
• Replaces covers with broken tabs, cracks, warping, or missing sections
• Common symptoms include a loose/rattling panel, poor fit, or visible damage

• One resin cover

• Disconnect power to the appliance before servicing
• Remove any mounting screws and/or release tabs; note the orientation for reassembly
• Transfer reusable clips or hardware from the original cover if applicable
• Do not overtighten fasteners to avoid cracking the plastic

This replacement door glass restores a clear viewing window and the protective barrier on your microwave door. Replace it when the original panel is cracked, shattered, or heavily scratched to keep the door secure and safe to use.

• Provides the see-through window and protective barrier within the microwave door
• Helps maintain proper door rigidity and alignment when intact
• Replace if the glass is cracked, chipped, shattered, loose, or badly scratched
• Reduced visibility, rattling, or visible damage are common symptoms of failure

• Unplug the microwave before servicing; microwaves can retain high voltage—use caution and do not open the cabinet
• Support the door; removal from the hinges may be required per your model's diagram
• Handle glass with cut-resistant gloves; edges can be sharp
• Transfer any reusable trim/clips as directed and verify the door latches and closes properly after installation

This vinyl sleeve fits over a rod, tube, or wire in the refrigerator to protect and cushion contact points. It reduces wear and vibration and helps keep components aligned for smooth, reliable operation.

• Provides a protective barrier at contact points to prevent abrasion or marring
• Helps maintain spacing and alignment for a snug, proper fit
• Cushions to damp vibration and reduce rattles or squeaks
• Replace if the sleeve is missing, cracked, hardened, or if components feel loose or make noise

• Disconnect power; turn off the water supply if working near water lines
• Note the sleeve's original location and orientation; take a photo for reference
• Remove the old sleeve and any debris; slide the new sleeve into the same position
• Check clearance and resecure related parts before restoring power

This refrigerator guide aligns and supports a mating component so it travels smoothly and stays on track. Replacing a cracked or missing guide restores proper movement and helps prevent binding, jamming, or premature wear.

• Guides and stabilizes the movement of the associated part to ensure smooth travel
• Keeps components aligned to prevent rubbing, derailment, or gaps
• Common signs of failure: sticking or binding, wobbling/misalignment, or parts coming off track
• Visible damage such as cracks, broken tabs, or missing pieces on the guide

• Disconnect power; if working near a dispenser or water path, turn off the water supply
• Remove the access panel/bin as needed and retain any screws/clips
• Seat the new guide and reuse existing hardware; verify a secure fit
• Restore power and test the component's movement for smooth operation

This replacement extension support restores proper alignment and secure mounting for the appliance component it attaches to, helping stop misalignment, rubbing, or loose parts and letting the appliance operate smoothly. What it does:

• Replaces a worn, broken or missing extension support used to secure or extend a nearby panel, drawer, or assembly.
• Helps stop rattling, uneven movement, or binding caused by a damaged support piece.
• Restores proper spacing and mounting so associated parts track and close correctly.
• Works as a direct-fit replacement when the original extension is damaged or missing.

• Disconnect power (and water, if applicable) before beginning any repair.
• Handle edges carefully; use basic hand tools and keep original fasteners if reusing them.
• If mounting hardware is missing or damaged, source matching screws/clips separately.

This canopy resistor regulates current to a range-hood or canopy fan circuit to help the blower run at the correct speeds. Replacing a failing resistor can restore proper fan speed control and stop intermittent operation. What it does:

• Controls electrical resistance in the canopy/blower circuit to help regulate fan speeds.
• Helps prevent the motor from running only on a single speed or from failing to start at selected speeds.
• Can cause symptoms such as inconsistent fan speeds, no response from speed controls, or occasional fan cutoff.
• Works with the hood's wiring and control switch to deliver the correct voltage to the fan motor.

• Disconnect power to the appliance before accessing the canopy or electrical connections.
• Inspect wiring and connectors for heat damage or corrosion; replace harness or terminals if damaged.

This replacement shield is a direct-fit protective cover that restores the appliance's factory protection for internal components. It prevents contact with sensitive parts and helps keep wiring and controls clear of debris. What it does:

• Protects wiring, controls and nearby components from heat, moisture and debris.
• Restores the original barrier that helps prevent accidental contact with moving or hot parts.
• Replaces cracked, broken or missing shields that can lead to rattling, exposed components or interference.
• Helps maintain appliance safety and quiet operation when installed correctly.

• One replacement shield

• Always disconnect power to the appliance before starting any repair.
• Handle replacement shield carefully — edges may be sharp; use gloves and basic hand tools.
• Retain and reuse original fasteners unless new hardware is specified; ensure shield is properly seated and secured.
• Do not operate the appliance with shields or covers missing.

The Microwave Cooktop Glass Cover is an essential component for maintaining the functionality and appearance of your microwave. This genuine OEM part ensures a perfect fit and durability, specifically designed for Samsung microwave models. The glass cover provides a smooth and stylish surface that protects your cooktop from spills, stains, and everyday wear. Easy to install, it restores your microwaveGÇÖs original look and performance without any hassle. The Microwave Cooktop Glass Cover not only enhances the aesthetic appeal of your appliance but also makes cleaning simpler, saving you time and effort in the kitchen. Whether your current cover is cracked, damaged, or missing, this genuine OEM part from Samsung guarantees reliability and seamless compatibility with your microwave. Invest in the Microwave Cooktop Glass Cover to ensure your appliance remains efficient and visually appealing, providing you with a better cooking experience every day.

This replacement sleeve fits over a rotating shaft to reduce friction and protect the mating surface, helping restore smooth operation and reduce noise. Use when a worn sleeve causes rubbing or uneven movement. What it does:

• Acts as a bushing to prevent metal-to-metal contact on a rotating shaft
• Reduces friction and wear on the shaft and surrounding components
• Helps stop rubbing, scraping, or squeaking noises caused by a worn sleeve
• Restores proper alignment for smoother, quieter operation

• Disconnect power (and gas, if applicable) before starting any repair
• Use basic hand tools; no special training required for most installations
• Inspect the shaft and mating surfaces; replace if excessively scored or damaged
• If press-fit, install carefully to avoid damaging the new sleeve; do not use solvents as a substitute for proper fit