Kenmore / Sears Refrigerator Drawer, Shelf, Pan

This refrigerator pan trim finishes the front edge of the shelf/pan assembly and helps secure the glass above the drawers. Replacing a cracked or missing trim restores a clean look and proper support for everyday use.

• Attaches to the shelf or pan frame to create a finished front edge
• Helps retain and support the glass insert above the drawers
• Can improve drawer alignment when the original trim is cracked or loose
• Common symptoms: broken/cracked trim, loose or missing edge piece, glass not sitting flat

• Disconnect power and remove food items before servicing
• Slide the shelf assembly out and carefully lift out the glass
• Release locking tabs on the old trim; align and snap the new trim into place
• Reinstall the glass and shelf; verify smooth drawer operation

This pantry drawer is the clear utility bin in the fresh food section that stores deli items and snacks. Replace a cracked or missing drawer to restore smooth sliding access and organized, contained storage. What it does:

• Provides a dedicated compartment for meats, cheeses, produce, and snacks
• Slides on existing rails for easy access to contents
• Helps contain small spills to protect shelves below
• Common symptoms: cracked bin, broken tabs, drawer falls off tracks or sticks, missing drawer

• 1 pantry drawer bin

• Empty the existing drawer, lift slightly, and pull straight out to remove from the rails
• Inspect and clean rails/cover area; remove debris before installing
• Align the new bin with the tracks and slide in until fully seated—do not force
• Hand-wash with mild soap before use; avoid harsh abrasives

This center crisper track supports and guides the refrigerator's produce drawers. Replacing a cracked or warped track restores smooth sliding and proper alignment so the bins open and close correctly without binding or sagging.

• Provides the center guide and support for the crisper drawers beneath the crisper cover
• Helps keep bins level and aligned for smooth operation
• Replace if the center rail is cracked, loose, or tabs are broken
• Typical symptoms: drawers stick, tilt, fall off the track, or won't close fully

• Disconnect power; remove crisper drawers and any glass shelf/cover as needed
• Note orientation; release tabs or remove fasteners to take out the old track
• Transfer and reuse existing hardware if required
• Seat the new track securely and verify drawer alignment before restoring power

The Drawer Slide Rail is an OEM part compatible with Whirlpool refrigerators. This rail provides a smooth sliding mechanism that allows access to drawers such as the vegetable or freezer storage drawers. 

Causes of a bad Drawer Slide Rail could include damage or wear over extended use. Drawer components depend on their slide rails functioning properly to open and close smoothly without jamming or catching.

Symptoms of a faulty Drawer Slide Rail include:

• Drawers that are difficult to open and close 
• Drawers that do not fully open or extend out 
• Excessive noise or vibration coming from drawers

This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This track pan replaces the damaged or worn snack/deli drawer pan so food stays contained and organized inside the refrigerator. It restores proper sliding and helps prevent spills and food contamination. What it does:

• Provides a shallow sliding pan for deli, snack or small-item storage
• Supports smooth in-and-out sliding of the drawer and helps keep contents contained
• Replaces cracked, warped, or broken pans that cause sticking or spills
• Helps maintain an organized refrigerator interior and makes cleaning easier

• One track pan

• Disconnect power to the appliance before beginning any work
• Empty and remove the existing drawer and pan before installing the replacement
• Slide the new pan into the same track position until it seats; verify smooth operation
• If the track or mounting hardware is damaged, replace those parts as well.

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Restore tidy storage in your refrigerator's deli/pantry drawer with this Pantry Drawer Divider. Replacing a cracked or missing divider keeps foods separated and helps the drawer slide and close properly without contents shifting or tipping.

• Separates and stabilizes items within the deli/pantry drawer for better organization
• Helps prevent contents from sliding and causing the drawer to bind
• Restores proper fit when the original divider is cracked, warped, or missing
• Typical symptoms: divider falls out or won't stay positioned; difficulty keeping foods organized

• Disconnect power to the refrigerator and remove items from the deli/pantry drawer
• Fully extend and lift out the drawer as directed in your user manual
• Align the divider with the molded slots/grooves and press or slide into place until secure
• Reinstall the drawer and verify smooth operation; do not force parts

This glass shelf provides a flat, stable surface for organizing food and containers inside your refrigerator. It restores usable storage space and helps keep items level to reduce spills and stacking issues. What it does:

• Replaces a broken, chipped or missing refrigerator shelf panel to restore storage functionality
• Supports food containers, beverages and small appliances used inside the fresh-food compartment
• Helps contain minor spills on the shelf surface for easier cleanup
• Fits into existing shelf supports or rails to lock the panel in place

• One glass shelf panel

• Remove food and all items from the area before replacing the shelf
• Lift the old shelf straight up from its supports; align the new panel and set it into the shelf rails
• Handle glass carefully and wear protective gloves to avoid cuts if damaged
• Do not use a cracked or compromised shelf — replace immediately for safety

The Deli Drawer Front Cover is an OEM part for LG refrigerators. It provides an attractive facia that protects the internal components of the deli drawer. This cover is designed to integrate with the style and finish of the refrigerator interior. 

Symptoms of a bad Deli Drawer Front Cover include: 

• Cracks, chips, or other visible cosmetic damage
• Discoloration that detracts from the aesthetics  
• The cover is loose, misaligned, or missing
• Difficulty opening or closing the deli drawer

Causes of a bad cover can be normal wear and tear over time from repeated use, as well as accidental drops or impacts that cause cracks or breaks.

This OEM replacement part is also compatible with select LG models.

This right-hand support is a small interior bracket used in select refrigerators to secure and stabilize the matching component on the right side. Replacing a cracked or missing support helps keep shelves and covers level and in place.

• Provides right-side support and alignment for the associated interior component
• Helps keep shelves/covers stable; prevents wobble, sagging, or unexpected drop
• Common signs of failure: broken tabs, cracked plastic, loose fit, or a missing support
• Replace if damaged from impact, overloading, or age

• Unplug the refrigerator and remove items to access the area
• Remove the related shelf/cover and retain any screws or clips
• Transfer and reuse the original mounting hardware if required
• Align the new support in the same orientation; secure firmly and confirm level before reassembly

The Snack Pan is an OEM part for Whirlpool refrigerators. It provides a designated space for storing snacks and small items within your refrigerator.

A bad snack pan can be caused by regular use, accidental damage, or exposure to spills and stains. If you notice cracks, discoloration, or a broken structure in the snack pan, it may indicate a problem with the pan itself.

Symptoms of a bad snack pan include:

• Cracked or damaged pan surface
• Discoloration or staining of the pan
• Inability to open or close the drawer

Replace your faulty snack pan with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Utility Pan is an OEM part for Whirlpool refrigerators. It is a storage drawer for various items in your refrigerator, such as deli meats, cheeses, and other small food items.

A bad utility drawer pan can be caused by regular use, accidental damage, or wear and tear over time. If you notice cracks, breaks, or warping in the pan, it may be time to replace it.

Symptoms of a bad utility drawer pan include:

• Cracks or breaks in the pan
• Warping or misalignment of the pan
• Difficulty in opening or closing the drawer

Replace your damaged or worn-out utility drawer pan with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This rail is a direct-replacement support rail used in compatible Whirlpool appliances to restore proper component alignment and movement. It helps maintain smooth operation of the related assembly and prevents excessive wear on connected parts. What it does:

• Provides structural support and guidance for the moving assembly it mounts to
• Keeps panels, drawers or components aligned to prevent binding or uneven wear
• Restores smooth movement when a worn or damaged rail causes sticking or misalignment
• Helps prevent rattling or vibration from a loose or broken support rail

• One replacement rail

• Turn off power to the appliance and follow the manufacturer's safety instructions before starting work
• Use appropriate tools and retain all fasteners; inspect adjacent components while replacing the rail

This replacement crisper glass is the clear shelf designed to sit over the refrigerator produce drawer, restoring a flat, stable surface for food storage and helping keep produce organized and visible. What it does:

• Replaces broken, cracked, or chipped crisper shelf glass to restore safe storage
• Provides a flat support surface for the crisper/produce drawer below
• Helps prevent items from falling into the drawer and improves visibility of contents
• Fits in the designated crisper opening and functions as the refrigerator's lower shelf glass

• 1 crisper glass shelf

• Handle carefully; glass can break—wear cut-resistant gloves and eye protection
• Remove food and drawers before replacing the glass; lift out old glass and set new glass into shelf rails or supports
• Do not force the glass into place; verify proper seating on rails to avoid shifting during use
• If damaged mounting clips or rails are present, replace them before installing the new glass