Kenmore / Sears Tub Or Basket

This outer tub is the main water containment housing for a top-load washer. It holds the wash basket and keeps water inside the machine so clothes get cleaned while protecting internal components from leaks and splashes. What it does:

• Contains the wash basket and holds wash water during fill and spin cycles.
• Supports and aligns the inner basket and related suspension components.
• Prevents water from reaching the cabinet and electrical components, reducing leak damage.
• Symptoms of a failing outer tub can include visible leaks, excessive vibration, or water pooling beneath the washer.

• One outer tub (single unit as shown)

• Disconnect power and water supply before starting any repair.
• Drain remaining water from the washer and remove the cabinet or access panels per your model's service instructions.
• Outer tub replacement typically requires transferring seals, bearings, and basket components; inspect and replace gaskets/parts as needed.

This part is a replacement drum assembly. This part's intended use is to repair a broken or defective drum assembly in washing machines.The drum is a perforated tub that holds the laundry inside the washing machine and rotates to efficiently wash and clean clothes and materials. This part is essential and will need to be replaced if it becomes worn, bent, dented, or otherwise unable to function properly. It's important that the appliance is unplugged before any attempt is made to replace this part. Work gloves are recommended for proper safety and protection.This is a genuine OEM part made by LG and has been sourced directly from the manufacturer. This is an authentic OEM replacement part made of high-quality materials. This drum assembly can be used with different models of washing machines that have been manufactured by LG, Kenmore, and some other brands. It is sold individually.

Outer tub assembly includes: outer tub, tub seal, drive shaft and bearings. To rebuild the tub, order the bearing and tub seal kit W10435302 and the bearing installation tool W10447783. When replacing this part, if you see that your motor stator is broken, search by your model number to make sure you get the right stator for your model.

Kit Includes Front & Rear Outer Tubs with bearing Plus One Gasket. Bearings not available seperate.

This outer tub is the dishwasher's main outer wash tub shell that helps contain water and support internal components. Replacing a damaged outer tub restores the cabinet seal and helps stop leaks and moisture damage. What it does

• Houses and supports the inner tub, pump, and other internal components.
• Contains wash water to prevent leaks from reaching the cabinet or flooring.
• Helps maintain proper alignment for spray arms and seals to function.
• Commonly replaced when the tub is cracked, warped, or allowing water to escape.

• One outer tub.

• Disconnect power and water before starting; follow OEM disassembly steps for your model.
• Replacement typically requires removing the dishwasher door, control console, and interior components; keep fasteners organized.
• Inspect and replace gaskets, seals, and mounting hardware as needed for a watertight repair.

This outer tub assembly is the main exterior drum that holds the inner tub and water during a wash cycle, restoring the washer's sealed water chamber and structural support. Replace a damaged outer tub to correct leaks and restore proper operation. What it does:

• Holds and seals water inside the washer's wash chamber for normal fill and drain cycles.
• Provides structural support for the inner tub and suspension system to reduce vibration.
• Replaces a cracked, warped or corroded outer tub that can cause visible leaks.
• Can address symptoms such as persistent leaks, unusual vibration or noise originating from the tub area.

• One outer tub assembly

• Disconnect power and water supply before starting any repair.
• Outer tub replacement may require transferring the inner tub, seals, and other components; inspect and replace seals or gaskets if worn.
• Use proper lifting support—tub assemblies are heavy and awkward to handle; consider a second person.
• Verify appliance compatibility with the part number before ordering.

Note: Comes with rear bearing (not available separately)

Outer tub assembly includes: outer tub, tub seal, drive shaft and bearings. To rebuild the tub, order the bearing and tub seal kit W10435302 and the bearing installation tool W10447783.

This Tub-Outer is the washer's main outer wash tub that holds water and supports internal components. Replacing a damaged outer tub restores the washer's water containment and prevents leaks that can damage floors and electronics. What it does:

• Houses the inner tub and creates the sealed wash chamber for water and detergent
• Keeps water contained during fill, wash and spin cycles
• Prevents leaks or puddling when the outer tub is intact
• A cracked or warped outer tub can cause visible leaks, water on the floor, or washer shutdowns

• Disconnect power and water supply before servicing; drain remaining water from the machine
• Outer tub replacement often requires removal of the cabinet, transmission/drum assembly, or transfer of bearings/seals—follow OEM instructions
• Use proper lifting assistance; the tub assembly may be heavy and awkward to handle

Note: Bearings are only available with the gearcase assembly.