Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore / Sears Washer Dryer Combo Spring Parts

Best Seller
Kenmore Tub Suspension Pads
Genuine Whirlpool part
By: Whirlpool
Part Number: 285744

The Tub Suspension Pads are an OEM part for Whirlpool washing machines. These pads are designed to provide cushioning and stability to the washer tub, reducing vibration and noise during the wash and spin cycles. This kit contains three pads, each 2 1/4 inches long

Over time, the tub suspension pads can wear out or deteriorate, especially with frequent use or heavy loads. Exposure to harsh chemicals or unbalanced loads can also cause the pads to lose their effectiveness.

Symptoms of bad tub suspension pads include:

  • Excessive vibration or shaking during operation
  • Loud banging or thumping noises during the spin cycle
  • The washer moving or "walking" across the floor
  • Uneven or poorly balanced loads leading to inefficient washing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You It was dancing around the floor when it went into the spin cycle   Harry W. • Landisburg , PA • January 19, 2020

First went through the troubleshooting guide on the website and read the various stories and watched the repair videos for replacing the springs and suspension pads. Then before ordering any parts disassembled the machine only to the point of removing the cabinet to see if there were any obvious issues. The springs appeared OK but I couldn't tell of they were fatigued or not and all were in place but the tub suspension pads were definitely worn out. I then put the machine back together and went... Read more

More
$13.95
Compare At:
$16.46
You Save:
$2.51

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Counterbalance Spring Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285901

The Counterbalance Spring Kit is an OEM part for Whirlpool washing machines. This kit includes springs that help balance and stabilize the washer drum during the spin cycle, preventing excessive movement and vibration. The counterbalance spring kit includes 3 counterbalance springs. The counterbalance spring kit includes 3 counterbalance springs.

Over time, counterbalance springs can wear out, lose tension, or become damaged due to repeated use and the strain of heavy loads. A faulty counterbalance spring can lead to instability and increased noise during operation, affecting the washer's performance.

Symptoms of a bad counterbalance spring kit include:

  • Excessive shaking or vibrating during the spin cycle
  • Loud banging or thumping noises
  • The washing machine moving or "walking" during operation
  • Unevenly distributed loads or off-balance errors

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You My whirlpool washer was chasing me around the room it was so out of balance and shaking   James S. • Oak Point , TX • March 21, 2016

My wife and I along with Mat on the video replaced the upper and lower friction pads, along with the balance springs. The machine runs smooth as it did new. Thank you everyone at Appliance Parts Pro and Mat. You are a great company. P.S. my wife and I should had made our own video for you since we are both in our 60s I bet it would have been funny Thanks Again. JIm & Debbie from Texas. Read more

More
$48.95
Compare At:
$58.74
You Save:
$9.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Suspension Spring
Genuine Frigidaire part
By: Frigidaire
Part Number: 134144700

The Suspension Spring Kit is an OEM replacement part for Frigidaire front-loading washing machines. These suspension springs are positioned at the top front of the washer, underneath the tub, to help support the weight of the drum during operation.

Over many cleaning cycles, suspension springs can wear down and lose their ability to dampen vibration.

Symptoms of bad suspension springs include:

  • Excessive shaking or rattling of the washing machine
  • Loud banging or knocking noises coming from inside the washer
  • The tub moving excessively during washing and spinning

It is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Not spinning heavy loads.   Jim S. • Midlothian , TX • December 05, 2017

Replaced springs and shocks. Read more

More
$49.95
Compare At:
$59.44
You Save:
$9.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Spring
Genuine Whirlpool part
By: Whirlpool
Part Number: W10207783

The Suspension Spring is an OEM part for Whirlpool washing machines. This part helps balance the tub during the spin cycle, ensuring smooth operation and reducing vibrations. By supporting the tub, the suspension springs absorb and dampen the motion as the washer agitates and spins clothes dry.  

Causes of a bad Suspension Spring can include stretching or weakening over time, rust or corrosion, or breakage due to heavy loads or excessive vibration.  

Symptoms of a bad Suspension Spring include:

  • The washing machine vibrating more than usual
  • Unusual noises during the spin cycle
  • The tub sagging or tilting
  • The washer "walking" or moving during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Washer tub off balance; damaged spring   Mark S. • Kings Point , NY • March 20, 2016

Replaced set of three springs. Read more

More
$98.95
Compare At:
$116.76
You Save:
$17.81

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Spring
Genuine Frigidaire part
By: Frigidaire
Part Number: 134885900

This genuine replacement spring restores proper tension and smooth movement in the affected mechanism, helping your appliance operate reliably. Replacing a weakened or broken spring can reduce noise and correct misalignment caused by lost tension.

  • Maintains tension and provides return force for connected levers, brackets, or linkages
  • Helps keep components in position and minimizes excess play or rattling
  • A weakened, stretched, or broken spring can cause poor engagement or inconsistent operation
  • Common signs include parts not returning to rest, excess slack, or new noises from the area
What's included: 1 spring Install notes:
  • Disconnect power; also shut off water supply
  • Note the spring's hook orientation and routing; take a reference photo before removal
  • Control the spring with pliers and wear gloves/eye protection to avoid snap-back injuries
  • Inspect related brackets/retainers and replace any worn components to ensure proper tension

Do-It-Yourself Stories from Customers like You My washer started banging bad on the spin cycle and i would have to force the top open rearange the load and then it would work to finish after further review it was the springs   David H. • Englewood , FL • April 06, 2018

Watched a few of your videos and ordered the springs and a insert, and actually got the parts right. I am not a Appliance repair guy but I am retired and I am pretty handy so I thought what the heck. I watched the videos, a lot of common sense, common tools, and plenty of time. My knuckles are busted up and a little blood, but I got it done. Was actually kind of rewarding. Works like a champ. The Videos, ARE AWESOME. Read more

More
$15.95
Compare At:
$18.98
You Save:
$3.03

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Idler Spring (Dryer)
Genuine Frigidaire part
By: Frigidaire
Part Number: 3205241

Keep your dryer tumbling smoothly by restoring proper belt tension. This idler spring attaches to the idler arm and maintains tension on the drive belt so the drum turns reliably without slipping or squealing. What it does:

  • Applies constant tension to the idler pulley to keep the drive belt tight around the drum and motor
  • Helps resolve a drum that won't turn or tumbles intermittently
  • Addresses belt issues such as slipping off, appearing loose, or premature breakage from low tension
  • Can reduce squealing/chirping from the idler area caused by belt slip
What's included:
  • 1 idler spring
Install notes:
  • Disconnect power; for gas dryers, also shut off the gas supply
  • Access the idler assembly by removing the front or lower access panel per your model
  • Relieve belt tension, unhook the old spring from the idler arm/frame, and install the new spring in the same orientation and holes
  • Rotate the drum by hand to check smooth operation before reassembly

More
$55.95
Compare At:
$66.58
You Save:
$10.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Door Lock Return Spring
Genuine Frigidaire part
By: Frigidaire
Part Number: 134886600

This spring restores tension to the door lock mechanism so the latch returns to its proper position after operation. A worn or missing spring can cause a loose latch, difficulty locking, or a door that won't stay secured during a cycle.

  • Returns the door lock latch to its resting position
  • Helps ensure the door locks securely during operation
  • Symptoms can include a floppy/loose latch, intermittent lock errors, or door not staying latched
  • Also helps resolve issues where the door won't unlock smoothly
What's included: 1 return spring Installation notes:
  • Disconnect power before servicing
  • Access the door lock assembly per your model's service procedure
  • Note spring orientation during removal; install the new spring in the same positions
  • Latch operation by gently opening/closing the door before reassembling

More
$28.35
Compare At:
$33.74
You Save:
$5.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Suspension Spring, Single
Genuine Frigidaire part
By: Frigidaire
Part Number: 134890500

This is a suspension spring for select washers. It supports and stabilizes the wash tub during spin and agitation to reduce vibration and noise, helping the machine run smoothly.

  • Supports the tub within the cabinet to control movement
  • Helps reduce excessive vibration, banging, or walking during spin
  • Addresses symptoms like out-of-balance loads, noise, or shaking
  • Loss of tension, stretching, or breakage can require replacement
What's included: 1 suspension spring Install notes:
  • Unplug the washer and shut off water supply before repair
  • Access typically requires removing the top or front panel; support the tub to relieve spring tension
  • Wear gloves and eye protection; springs are under tension
  • Replace any damaged or missing suspension components in pairs or as required.

More
$14.95
Compare At:
$17.79
You Save:
$2.84

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Spring
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281085

 

More
$9.64
Compare At:
$11.47
You Save:
$1.83

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Spring
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303161133

 

More
$36.95
Compare At:
$43.97
You Save:
$7.02

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Spring
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303161174

 

More
$17.70
Compare At:
$21.06
You Save:
$3.36

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Spring
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308002456

 

More
$6.52
Compare At:
$10.15
You Save:
$3.63

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Spring (Tension)
Genuine Frigidaire part
By: Frigidaire
Part Number: 137046100

This tension spring provides the restoring force needed for a refrigerator/freezer door or internal mechanism, helping components return to their proper position for reliable operation and alignment. What it does

  • Provides tension to return a door, hinge, or actuator to its resting position
  • Helps prevent door sagging, misalignment, or incomplete closure when installed correctly
  • Restores proper feel and resistance to a moving component
  • Can stop intermittent contact or binding caused by a worn or broken spring
What's included
  • One replacement spring
Install notes
  • Disconnect power and empty or secure the area before starting any repair
  • Handle with care and use safety glasses and gloves; springs can release suddenly
  • Note orientation and attachment points before removal so you can install the new spring the same way

More
$39.74
Compare At:
$47.29
You Save:
$7.55

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Spring - Horizontal - Long
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303212125

 

More
$19.41
Compare At:
$23.29
You Save:
$3.88

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Spring
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308015828

 

More
$29.95
Compare At:
$35.34
You Save:
$5.39

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Spring
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303209351

 

More
$5.71
Compare At:
$6.28
You Save:
$0.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

When your Kenmore / Sears washer dryer combo needs a bit of TLC, having the right replacement parts is crucial. These little components, like the Kenmore / Sears washer dryer combo Spring, play a vital role in keeping your appliance running smoothly. Without them, it's hard to imagine your washer dryer combo delivering the reliable performance you've come to expect.

Your washer dryer combo is one of the essential appliances that keep your household ticking. From the daily laundry loads to those occasional massive clean-ups, it handles it all. The parts within your Kenmore / Sears machine are designed to fit together perfectly, ensuring efficiency and longevity. The Kenmore / Sears washer dryer combo Spring, for instance, is integral in maintaining the delicate balance and motion during cycles. Without such parts functioning correctly, your appliance might lose its efficiency over time.

Opting for OEM replacement parts like the Kenmore / Sears washer dryer combo Spring ensures you're getting quality and compatibility. These parts are crafted to meet the exact specifications of your appliance, making installation straightforward and restoring the machine to its optimal performance. Investing in genuine parts also means you're choosing durability and peace of mind, knowing your appliance is equipped to handle the demands of regular usage.

So, whether your washer dryer combo needs a little tweaking or a complete part replacement, rest assured that quality parts are readily available. Keeping your Kenmore / Sears washer dryer combo in top shape has never been easier, ensuring it continues to serve you well for years to come.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store