Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore / Sears Washer Dryer Combo Switch

Best Seller
Kenmore Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036

The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.

Symptoms of a failing Washer Door Switch include:

  • The washer not starting or stopping unexpectedly during a cycle
  • Error codes related to door closure issues displayed on the washer's control panel
  • The washer door not locking properly or the lock mechanism not engaging
  • The washer continuing to operate with the door open

Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.

This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

This part fixes the following symptoms
  • Will not drain
  • Pumps but will not spin
  • Timer will not advance
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped   Eugene N. • Roswell , NM • August 28, 2016

The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new... Read more

More
$20.95
Compare At:
$32.43
You Save:
$11.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Start Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134399700

The Start Switch is an OEM replacement part for Frigidaire dryers. This part initiates the dryer's cycle once the user selects the desired settings. By pressing the start switch, the motor activates, and the drying process begins, ensuring clothes are dried according to the selected specifications.

Symptoms of a bad Start Switch include:

  • The dryer not starting when the switch is pressed
  • Intermittent starting issues, where the dryer sometimes starts and sometimes doesn’t
  • The need to hold the switch in place to keep the dryer running
  • Unusual noises when the switch is pressed

Causes for a malfunctioning Start Switch can include electrical issues, such as faulty wiring or connections, wear and tear from frequent use, or internal failures within the switch mechanism that prevent it from signaling the motor to start.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers.

Do-It-Yourself Stories from Customers like You Start switch knob broke off.   Jeff O. • Laurier , WA • March 07, 2018

I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$ easy peasy!! :-) Read more

More
$64.95
Compare At:
$77.29
You Save:
$12.34

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Door Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813600

This door switch senses whether the appliance door is closed and signals the controls to run only when it's safe. Replacing a worn or intermittent switch restores dependable starts and proper shutoff when the door opens. What it does:

  • Detects door position and allows operation only when the door is fully closed
  • Interrupts operation when the door opens for safety
  • Common symptoms include: won't start, stops when the door is moved, or "door open" message/error
  • Intermittent starts due to worn actuator or internal switch contacts
What's included:
  • 1 door switch
Install notes:
  • Disconnect power before servicing
  • Access the switch from the front or top panel; release mounting screws or tabs
  • Move wires to the new switch one at a time to maintain correct positions, then secure the switch
  • Test operation before reassembly

More
$48.95
Compare At:
$58.25
You Save:
$9.30

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Broken Belt Switch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279782

The Broken Belt Switch Kit is an OEM replacement part for Whirlpool dryers. It is an assembly that includes a microswitch and bracket installed to monitor the dryer drum belt status. The broken belt switch plays an important safety role by automatically stopping the dryer if it detects the drum belt breaking or slipping off the motor pulley during a cycle. The kit includes a switch, actuator lever, screws, and wire terminals.

Causes of a bad broken belt switch can include wear and tear over time, electrical malfunctions, or physical damage from a broken belt or other internal issues. Ensuring the switch is functioning correctly is crucial for the safe and efficient operation of the dryer.

Symptoms of a broken or failing switch include: 

  • The dryer failing to shut off if the belt breaks during operation
  • Inability to diagnose belt issues through error code displays  
  • Intermittent stopping or variance in belt tension detection

This genuine Whirlpool switch replacement is also compatible with Kenmore, Maytag, Jenn-Air, and KitchenAid dryer models.

Do-It-Yourself Stories from Customers like You Broken belt switch   Jack F. • Hermosa Beach , CA • July 08, 2016

Every time I tried to start our dryer, the "Sensing Light" came on, I heard a little "click," and the dryer would not start. According to the very helpful Appliance Parts Pros. videos, I was able to dismantle, diagnose a few components, and discover the broken part. In this case, it was a Broken Belt Switch. I ordered the part, we went on vacation for a week, and when we returned home the part was at our residence. The next day, I installed the part and all is good now. I am nearly 70 years... Read more

More
$48.95
Compare At:
$58.74
You Save:
$9.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Lid Lock Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134936800

The Lid Lock Switch is an OEM part for Frigidaire washing machines. This switch is responsible for ensuring the lid is securely locked during the wash and spin cycles, preventing the lid from being opened and ensuring safe operation of the machine.

Causes of a bad lid lock switch can include electrical failures, wear and tear from frequent use, or damage due to impact or mishandling.  

Symptoms of a bad lid lock switch include:

  • The washing machine not starting or stopping mid-cycle
  • The lid not locking or unlocking as expected
  • Error codes related to the lid lock mechanism
  • Unusual noises during the wash or spin cycles

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You The locking mechanism would not release the lid had to break it to open   Dennis H. • Bridgeton , NC • January 10, 2015

1) Ordered part. 2) Removed front panel by loosening the two screws at the bottom front. 3) Removed old Safety Switch/Lid Lock by disconnecting wires (plug and 2 female disconnects) 4) Reconnected all wires and reinstalled switch. 5) Replaced front panel. 6) Tested Unit. 7) FYI - I found that the locking mechanism stays locked until cycle completely finishes on its own. DO NOT force the cycle to end. Lid will NOT unlock. Read more

More
$76.95
Compare At:
$92.34
You Save:
$15.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Resistor
Genuine Whirlpool part
By: Whirlpool
Part Number: 279872

This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.

  • Provides precise resistance to reduce voltage/current in the designated dryer circuit
  • Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model)
  • Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior
  • Replace if visibly burned/damaged or if testing shows an open or shorted condition
What's included: One resistor Install notes:
  • Disconnect power to the appliance before servicing
  • Access the console/wiring harness and note original wire routing
  • Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing
  • After installation, run a test cycle to ensure proper operation of the affected function

Do-It-Yourself Stories from Customers like You Timer wouldn't advance on my dryer   John L. • Oblong , IL • March 22, 2016

I ordered a new timer and installed it with the help of the videos provided and this did not solve my problem so I chated with the pros @ Appliance Parts Pros and told them my problem and they told me the problem and recommended the part I needed and With the incredibly fast shipping I had the part the next day. I installed it and now my dryer timer works great.Thanks to APPs for their help and ease of ordering and fast shipping. I highly recommend AppliancePartPros and will definitely use... Read more

More
$46.95
Compare At:
$55.87
You Save:
$8.92

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134422700

This is a factory switch used in the appliance's control/safety circuit. Replacing a worn or failed switch restores reliable signaling so the selected function engages properly and the unit responds consistently to user inputs and status conditions.

  • Provides an electrical on/off signal to the control or safety circuit
  • If faulty, selected functions may not activate or may be intermittent
  • Can trigger error codes related to a switch input, depending on model
What's included: 1 switch Install notes:
  • Disconnect power before servicing; turn off gas/water if applicable
  • Note/photograph wire locations and transfer connectors one at a time
  • Verify actuator alignment and secure mounting before reassembly
  • After installation, run a test cycle to confirm proper operation

This part fixes the following symptoms
  • Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You The stem of the original switch had been twisted off   Benjamin R. • Seattle , WA • April 15, 2019

I removed two sheet metal screws to remove the panel above the washing machine lid. That exposed four more phillips drive sheet metal screws, after removing those the dashboard control panel is held by two smaller black screws slightly recessed in the lower corners. This allowed the panel to be pulled down from the top, revealing the back of the switch. At this point I took a picture of the wiring connections with my cell phone to make sure I put them on the new switch in the same... Read more

More
$76.95
Compare At:
$91.57
You Save:
$14.62

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134996900

 

Do-It-Yourself Stories from Customers like You Agitator was turning on while filling with water   Richard M. • Coffeyville , KS • August 21, 2015

Put in water level switch Read more

More
$80.27
Compare At:
$95.52
You Save:
$15.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Switch - Temperature
Genuine Frigidaire part
By: Frigidaire
Part Number: 131227800

 

More
$132.95
Compare At:
$158.21
You Save:
$25.26

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Switch - Pressure
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303293375

 

More
$104.38
Compare At:
$113.12
You Save:
$8.74

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Switch - Dryer Temp
Genuine Frigidaire part
By: Frigidaire
Part Number: 131730400

 

More
$142.37
Compare At:
$168.00
You Save:
$25.63

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134493500

 

More
$154.95
Compare At:
$184.39
You Save:
$29.44

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Switch - Temperature
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303017895

 

More
$59.34
Compare At:
$70.61
You Save:
$11.27

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Temp Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308008463

 

More
$81.65
Compare At:
$97.16
You Save:
$15.51

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Resistor
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308015784

 

More
$34.95
Compare At:
$41.24
You Save:
$6.29

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Resistor - Temperature Selector
Genuine Frigidaire part
By: Frigidaire
Part Number: 08007735

 

More
$7.50
Compare At:
$8.25
You Save:
$0.75

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Looking to maintain the peak performance of your appliance? Kenmore / Sears washer dryer combo replacement parts are crucial in keeping your unit running smoothly. These parts ensure you can tackle laundry day without a hiccup.

Washer dryer combos are indispensable in combining washing and drying into one seamless process, saving both space and time. Key components like switches play a vital role in managing the different functions of your machine. Kenmore / Sears washer dryer combo parts, specifically switches, help control operations, making sure the machines respond accurately to user commands.

Using OEM Kenmore / Sears parts guarantees that you're getting the exact replacement designed for your model. OEM parts are built to meet the original specifications, ensuring a flawless fit and long-lasting performance. By opting for these quality components, you can extend the life of your washer dryer combo, avoiding the need for frequent repairs or replacements.

Rest assured that Kenmore / Sears washer dryer combo replacement parts are readily available and of excellent quality. Keeping your appliance in top shape is simple with the right parts, ensuring you can continue to enjoy the convenience of a reliable washer dryer combo.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store