Washer Dryer Combo Spring Parts

The Tub Suspension Pads are an OEM part for Whirlpool washing machines. These pads are designed to provide cushioning and stability to the washer tub, reducing vibration and noise during the wash and spin cycles. This kit contains three pads, each 2 1/4 inches long

Over time, the tub suspension pads can wear out or deteriorate, especially with frequent use or heavy loads. Exposure to harsh chemicals or unbalanced loads can also cause the pads to lose their effectiveness.

Symptoms of bad tub suspension pads include:

• Excessive vibration or shaking during operation
• Loud banging or thumping noises during the spin cycle
• The washer moving or "walking" across the floor
• Uneven or poorly balanced loads leading to inefficient washing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Self-Leveling Leg Spring is an OEM replacement part for Whirlpool washers. It is responsible for stabilizing the washer and ensuring it sits level on uneven surfaces. Each spring is individually designed to compress or extend based on the weight and load distribution inside the washer tub. 

Causes can include failure of the compression spring over many usage cycles, or damage from over-compressing the spring through excess weight loads. 

Symptoms of a bad self-leveling leg spring include:

• The washer rocks or wobbles noticeably during operation  
• Excessive vibration transferred to nearby appliances or cabinets
• Difficulty loading and unloading clothes due to an unleveled washer 
• Premature wear of internal components like bearings from prolonged off-balancing

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Counterbalance Spring Kit is an OEM part for Whirlpool washing machines. This kit includes springs that help balance and stabilize the washer drum during the spin cycle, preventing excessive movement and vibration. The counterbalance spring kit includes 3 counterbalance springs. The counterbalance spring kit includes 3 counterbalance springs.

Over time, counterbalance springs can wear out, lose tension, or become damaged due to repeated use and the strain of heavy loads. A faulty counterbalance spring can lead to instability and increased noise during operation, affecting the washer's performance.

Symptoms of a bad counterbalance spring kit include:

• Excessive shaking or vibrating during the spin cycle
• Loud banging or thumping noises
• The washing machine moving or "walking" during operation
• Unevenly distributed loads or off-balance errors

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Spring Idler is an OEM replacement part for Speed Queen residential clothes dryers. It works with the dryer drum to facilitate the controlled tumbling of laundry items during the drying cycle. Proper functioning is important for efficiency and effectiveness.

Causes of a bad spring idler can include material fatigue from years of repetitive use. It can also result from overloading the dryer with excessively heavy wet loads that put abnormal stress on the idler mechanism.

Symptoms of a failed spring idler include:

• The dryer drum not rotating smoothly
• Clothing failing to tumble freely and wrinkling instead
• Prolonged drying cycles and increased energy use
• Noisy squeaking or creaking emanating from inside the dryer

As the mechanism responsible for facilitating optimal tumbling, this OEM Speed Queen replacement idler spring restores smooth and efficient dryer operation.

The Suspension Spring Kit is an OEM replacement part for Frigidaire front-loading washing machines. These suspension springs are positioned at the top front of the washer, underneath the tub, to help support the weight of the drum during operation.

Over many cleaning cycles, suspension springs can wear down and lose their ability to dampen vibration.

Symptoms of bad suspension springs include:

• Excessive shaking or rattling of the washing machine
• Loud banging or knocking noises coming from inside the washer
• The tub moving excessively during washing and spinning

It is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This idler spring maintains proper tension on the dryer's drive belt by pulling the idler arm. Replacing a weak or broken spring restores consistent drum rotation and helps prevent belt slippage and noise.

• Applies tension to the idler pulley arm to keep the drive belt tight
• Helps the motor turn the drum smoothly without belt slip
• A worn, stretched, or broken spring may cause the drum not to turn or the belt to slip off
• Can contribute to squealing or chirping from the belt/pulley area

• Disconnect power; turn off gas supply for gas dryers
• Access the belt path; note belt routing and spring attachment points before removal
• Release belt tension, move the idler arm, attach the new spring, and re-tension the belt
• Rotate the drum by hand to verify belt tracking before reassembly and test run

This factory spring kit restores the designed tension and return action in the affected assembly so moving parts operate smoothly, stay in position, and wear evenly over time.

• Provides the correct counterforce to position or balance components
• Maintains steady tension to prevent drift, slamming, or misalignment
• Helps reduce squeaks, chatter, or uneven movement from fatigued springs
• Typical signs of failure: weak return, inconsistent movement, excess noise, or visible spring damage

• Disconnect power; shut off water or gas before servicing
• Wear eye protection—springs are under tension
• Note original spring anchor points and replace all springs in the kit as a set
• Use appropriate pliers or a hook tool; verify smooth operation before reassembly

The Suspension Spring is an OEM part for Whirlpool washing machines. This part helps balance the tub during the spin cycle, ensuring smooth operation and reducing vibrations. By supporting the tub, the suspension springs absorb and dampen the motion as the washer agitates and spins clothes dry.  

Causes of a bad Suspension Spring can include stretching or weakening over time, rust or corrosion, or breakage due to heavy loads or excessive vibration.  

Symptoms of a bad Suspension Spring include:

• The washing machine vibrating more than usual
• Unusual noises during the spin cycle
• The tub sagging or tilting
• The washer "walking" or moving during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This shifter spring helps engage and return the transmission shifter mechanism in select top-load washers, allowing smooth changes between agitation and spin for reliable wash performance.

• Maintains proper tension on the shift mechanism between agitate and spin
• A worn or broken spring can cause no spin, no agitate, or loud shifting noises
• May also lead to intermittent shifting or incomplete cycles
• Restores consistent mechanical engagement of the drive system

• Unplug the washer and shut off water supply before servicing
• Access is typically from the cabinet/rear; support the tub to prevent movement
• Note spring orientation and attachment points before removal
• Use needle-nose pliers or a spring tool; replace any severely worn mating parts

This genuine replacement spring restores proper tension and smooth movement in the affected mechanism, helping your appliance operate reliably. Replacing a weakened or broken spring can reduce noise and correct misalignment caused by lost tension.

• Maintains tension and provides return force for connected levers, brackets, or linkages
• Helps keep components in position and minimizes excess play or rattling
• A weakened, stretched, or broken spring can cause poor engagement or inconsistent operation
• Common signs include parts not returning to rest, excess slack, or new noises from the area

• Disconnect power; also shut off water supply
• Note the spring's hook orientation and routing; take a reference photo before removal
• Control the spring with pliers and wear gloves/eye protection to avoid snap-back injuries
• Inspect related brackets/retainers and replace any worn components to ensure proper tension

This front suspension rod assembly supports and stabilizes the washer tub from the front side, helping control vibration and keeping the basket centered for smooth spin and wash performance.

• Supports the tub from the front to maintain proper alignment
• Helps reduce excessive vibration, banging, or walking during spin
• Can address shaking, out-of-balance loads, or tub leaning forward
• Restores proper suspension when the original rod or spring is worn or broken

• Unplug the washer and shut off water before servicing
• Access typically requires lifting the top or removing the cabinet/front panel
• Support the tub while swapping the rod to prevent sudden drop
• Replace in matched positions; inspect other suspension rods for wear

Keep your dryer tumbling smoothly by restoring proper belt tension. This idler spring attaches to the idler arm and maintains tension on the drive belt so the drum turns reliably without slipping or squealing. What it does:

• Applies constant tension to the idler pulley to keep the drive belt tight around the drum and motor
• Helps resolve a drum that won't turn or tumbles intermittently
• Addresses belt issues such as slipping off, appearing loose, or premature breakage from low tension
• Can reduce squealing/chirping from the idler area caused by belt slip

• 1 idler spring

• Disconnect power; for gas dryers, also shut off the gas supply
• Access the idler assembly by removing the front or lower access panel per your model
• Relieve belt tension, unhook the old spring from the idler arm/frame, and install the new spring in the same orientation and holes
• Rotate the drum by hand to check smooth operation before reassembly

This rear suspension rod assembly supports the washer tub from the back of the cabinet. Replacing a worn or broken rod restores stable spin performance and helps reduce banging, vibration, and off-balance interruptions.

• Supports and stabilizes the wash tub from the rear of the cabinet
• Absorbs tub movement during agitation and spin to minimize vibration and noise
• Helps maintain tub alignment to reduce off-balance pauses or repeated redistributions
• Typical symptoms include loud banging, excessive shaking/walking, or the tub leaning toward the back

• Disconnect power and water; wear gloves and eye protection
• Open the cabinet or raise the top to access the rear suspension
• Support the tub to relieve tension, then remove and replace the rod in the same mounting points
• Level the washer and run a short test cycle after replacement

This spring restores tension to the door lock mechanism so the latch returns to its proper position after operation. A worn or missing spring can cause a loose latch, difficulty locking, or a door that won't stay secured during a cycle.

• Returns the door lock latch to its resting position
• Helps ensure the door locks securely during operation
• Symptoms can include a floppy/loose latch, intermittent lock errors, or door not staying latched
• Also helps resolve issues where the door won't unlock smoothly

• Disconnect power before servicing
• Access the door lock assembly per your model's service procedure
• Note spring orientation during removal; install the new spring in the same positions
• Latch operation by gently opening/closing the door before reassembling

This spring cover protects and retains a mechanism spring inside your washer. Replacing a cracked or missing cover helps keep the spring seated, limits debris intrusion, and supports smooth, reliable movement of the associated control, latch, or linkage.

• Shields the spring and helps keep it properly seated in its pocket
• Reduces friction and wear that can lead to premature spring failure
• Supports consistent return action for the related control, latch, or lever
• Typical symptoms include a missing/broken cover, exposed spring, rattling, or erratic operation

• Unplug the appliance and turn off water before servicing
• Access point varies by model; photograph spring/cover orientation before removal
• Control the spring during disassembly to prevent sudden release
• Ensure the cover is fully seated; test operation before final reassembly

This is a suspension spring for select washers. It supports and stabilizes the wash tub during spin and agitation to reduce vibration and noise, helping the machine run smoothly.

• Supports the tub within the cabinet to control movement
• Helps reduce excessive vibration, banging, or walking during spin
• Addresses symptoms like out-of-balance loads, noise, or shaking
• Loss of tension, stretching, or breakage can require replacement

• Unplug the washer and shut off water supply before repair
• Access typically requires removing the top or front panel; support the tub to relieve spring tension
• Wear gloves and eye protection; springs are under tension
• Replace any damaged or missing suspension components in pairs or as required.