Washer Dryer Combo Switch
Genuine Lg part
By: Lg
Part Number: EBF49827801
The Washer Door Lock Switch is an OEM part for LG washing machines. This critical safety feature locks the washer door during operation to prevent it from being opened, which ensures safety and proper functioning. The door lock switch also communicates with the washer's control system to indicate that the door is securely closed and the machine can begin its cycle.
Symptoms of a bad Washer Door Lock Switch include:
- The washing machine refusing to start, despite the door appearing to be closed.
- The door failing to lock properly, or the lock releasing prematurely during a cycle.
- Error messages on the washer's display related to door closure issues.
Causes of a bad door lock switch can include mechanical failures such as worn or damaged locking mechanisms, electrical issues like faulty wiring or failed solenoids, or alignment problems that prevent the door from engaging the switch properly.
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Lid or door won't close
-
Door latch failure
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
E0 code replaced drain pump and circulating motor the door switch assembly was separate issue. Ann M. • Coral Springs , FL • May 09, 2020
Superfast parts delivery. Got packages by the second day. Videos were extremely helpful and well done; we couldn't have done without them although we came across slight differences in our machine and found workarounds. Our machine did not drain the water so I drained the water manually via drain tube at bottom of the machine and checked the filter for blockage. All clear so I read articles on the internet and watched videos and took a chance on replacing the drain pump and circulating motor...
Read more
More
$67.95
- Compare At:
-
$80.18
- You Save:
-
$12.23
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036
The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.
Symptoms of a failing Washer Door Switch include:
- The washer not starting or stopping unexpectedly during a cycle
- Error codes related to door closure issues displayed on the washer's control panel
- The washer door not locking properly or the lock mechanism not engaging
- The washer continuing to operate with the door open
Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.
This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
This part fixes the following symptoms
-
Will not drain
-
Pumps but will not spin
-
Timer will not advance
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016
The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new...
Read more
More
$20.95
- Compare At:
-
$32.43
- You Save:
-
$11.48
Genuine Whirlpool part
By: Whirlpool
Part Number: W10169313
The Door Switch Kit is an OEM part for Whirlpool dryers. This kit includes a door switch that plays a crucial safety and operational role in the dryer's function. It ensures that the dryer operates only when the door is firmly closed, preventing the machine from running with an open door, which could pose safety risks and inefficiency in the drying process.
The causes of door switch failure often include physical damage from slamming the dryer door, wear and tear over time, or electrical issues such as short circuits.
Symptoms of a faulty Dryer Door Switch include:
- The dryer not starting when the door is closed
- The dryer continuing to run when the door is opened, which poses a significant safety hazard.
- Unusual noises from the switch area
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
-
Will not tumble
See more...
Do-It-Yourself Stories from Customers like You
Broken timer knob worn out door switch Kurt H. • Quakertown , PA • January 01, 2016
The timer knob simply pulls off the shaft with a solid, steady pull. Cleaned the timer cavity of lint/dust buildup. Aligned the keying flat of the shaft and knob and pushed the new knob on with careful, steady pressure until it was obviously seated. No tools required other than a vacuum.
The door switch would sometimes not shut the dryer off when the door was opened. New switch came with new fast-on connectors. Replacement required opening the top cover of the dryer and hinging it up. This...
Read more
More
$21.95
- Compare At:
-
$26.12
- You Save:
-
$4.17
Genuine Frigidaire part
By: Frigidaire
Part Number: 134399700
The Start Switch is an OEM replacement part for Frigidaire dryers. This part initiates the dryer's cycle once the user selects the desired settings. By pressing the start switch, the motor activates, and the drying process begins, ensuring clothes are dried according to the selected specifications.
Symptoms of a bad Start Switch include:
- The dryer not starting when the switch is pressed
- Intermittent starting issues, where the dryer sometimes starts and sometimes doesn’t
- The need to hold the switch in place to keep the dryer running
- Unusual noises when the switch is pressed
Causes for a malfunctioning Start Switch can include electrical issues, such as faulty wiring or connections, wear and tear from frequent use, or internal failures within the switch mechanism that prevent it from signaling the motor to start.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers.
Do-It-Yourself Stories from Customers like You
Start switch knob broke off. Jeff O. • Laurier , WA • March 07, 2018
I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$
easy peasy!! :-)
Read more
More
$64.95
- Compare At:
-
$77.29
- You Save:
-
$12.34
Genuine Ge part
By: Ge
Part Number: WE4X448
The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.
Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.
Symptoms of a bad flame sensor include:
- The dryer not heating or taking longer to dry clothes
- The dryer shutting off unexpectedly during a cycle
- The igniter glowing but not igniting the gas
- Error codes related to heating or ignition issues
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Dryer heating for only a short time then no heat at all David N. • Fairfax , CA • December 08, 2018
GE Gas Dryer Model DBVH512GF1WW began to heat for only a short amount of time so drying clothes took WAY too long. Read online that the first thing to replace are the solenoids. Bought the two solenoids from AppliancePartsPros.com for about $50 total, and it seems to have fixed the problem. Had to watch a few videos to learn to disassemble the dryer, and the job took a couple of hours, but now that I know what I'm doing it could be done in less than 30 minutes.
Also, the old solenoids tested...
Read more
More
$73.36
- Compare At:
-
$86.56
- You Save:
-
$13.20
Genuine Ge part
By: Ge
Part Number: WH12X955
The Lid Switch is an OEM part for GE washing machines. This part prevents the washer from operating when the lid is open. When the lid is closed, the switch activates, allowing the washing machine to proceed with the wash cycle.
Causes of a bad lid switch can include wear and tear from frequent use, damage due to accidental impacts, or electrical failures such as short circuits or corrosion.
Symptoms of a bad lid switch include:
- The washer not starting or stopping mid-cycle
- The machine not draining or spinning
- Error codes related to the lid being detected as open
- The lid not locking or unlocking properly
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The problem was the water wouldn't drain and I found out using the internet that it was probably the lid switch. I used a screwdriver to push down on the lid switch and the water drained. Ricardo R. • Clermont , FL • March 13, 2014
I ordered the lid switch and I recieved it within (2) days, I installed it and our washer is running again. Thanks to appliancepartspros.com. This is my second time that I have ordered a part from them at a reasonable price and quick delivery,I will use them again if I need another part for any of my appliances.
Ricardo J. Rios
Read more
More
$109.77
- Compare At:
-
$129.53
- You Save:
-
$19.76
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813600
This door switch senses whether the appliance door is closed and signals the controls to run only when it's safe. Replacing a worn or intermittent switch restores dependable starts and proper shutoff when the door opens. What it does:
- Detects door position and allows operation only when the door is fully closed
- Interrupts operation when the door opens for safety
- Common symptoms include: won't start, stops when the door is moved, or "door open" message/error
- Intermittent starts due to worn actuator or internal switch contacts
What's included:
Install notes:
- Disconnect power before servicing
- Access the switch from the front or top panel; release mounting screws or tabs
- Move wires to the new switch one at a time to maintain correct positions, then secure the switch
- Test operation before reassembly
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: 279782
The Broken Belt Switch Kit is an OEM replacement part for Whirlpool dryers. It is an assembly that includes a microswitch and bracket installed to monitor the dryer drum belt status. The broken belt switch plays an important safety role by automatically stopping the dryer if it detects the drum belt breaking or slipping off the motor pulley during a cycle. The kit includes a switch, actuator lever, screws, and wire terminals.
Causes of a bad broken belt switch can include wear and tear over time, electrical malfunctions, or physical damage from a broken belt or other internal issues. Ensuring the switch is functioning correctly is crucial for the safe and efficient operation of the dryer.
Symptoms of a broken or failing switch include:
- The dryer failing to shut off if the belt breaks during operation
- Inability to diagnose belt issues through error code displays
- Intermittent stopping or variance in belt tension detection
This genuine Whirlpool switch replacement is also compatible with Kenmore, Maytag, Jenn-Air, and KitchenAid dryer models.
Do-It-Yourself Stories from Customers like You
Broken belt switch Jack F. • Hermosa Beach , CA • July 08, 2016
Every time I tried to start our dryer, the "Sensing Light" came on, I heard a little "click," and the dryer would not start.
According to the very helpful Appliance Parts Pros. videos, I was able to dismantle, diagnose a few components, and discover the broken part. In this case, it was a Broken Belt Switch.
I ordered the part, we went on vacation for a week, and when we returned home the part was at our residence. The next day, I installed the part and all is good now.
I am nearly 70 years...
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 134936800
The Lid Lock Switch is an OEM part for Frigidaire washing machines. This switch is responsible for ensuring the lid is securely locked during the wash and spin cycles, preventing the lid from being opened and ensuring safe operation of the machine.
Causes of a bad lid lock switch can include electrical failures, wear and tear from frequent use, or damage due to impact or mishandling.
Symptoms of a bad lid lock switch include:
- The washing machine not starting or stopping mid-cycle
- The lid not locking or unlocking as expected
- Error codes related to the lid lock mechanism
- Unusual noises during the wash or spin cycles
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The locking mechanism would not release the lid had to break it to open Dennis H. • Bridgeton , NC • January 10, 2015
1) Ordered part.
2) Removed front panel by loosening the two screws at the bottom front.
3) Removed old Safety Switch/Lid Lock by disconnecting wires (plug and 2 female disconnects)
4) Reconnected all wires and reinstalled switch.
5) Replaced front panel.
6) Tested Unit.
7) FYI - I found that the locking mechanism stays locked until cycle completely finishes on its own. DO NOT force the cycle to end. Lid will NOT unlock.
Read more
More
$76.95
- Compare At:
-
$92.34
- You Save:
-
$15.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001514
The Lid Switch Assembly with Fuse is an OEM part for Whirlpool washing machines. It ensures that the washer's lid is securely closed before the machine operates, preventing the washer from running with the lid open.
Over time, the lid switch assembly can fail due to regular wear and tear, electrical issues, or damage to the switch mechanism. Exposure to moisture or repeated opening and closing of the lid can also contribute to its deterioration.
Symptoms of a bad lid switch assembly include:
- The washer not starting or stopping mid-cycle
- The machine not spinning or agitating
- No response when trying to start a cycle
- The washer filling but not advancing to the next cycle stage
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad lid switch assembly Jim A. • Navarre , FL • March 15, 2014
Removed front and top panels of washer, removed old switch assembly. Then mounted and hooked up new switch assembly, put panels back on, turned on power and unit now works fine. Thanks for the quick delivery on the part...our total machine down time was only 36 hours. Biggest difficulty was getting the machine out of its position to work on it!
Read more
More
$125.76
- Compare At:
-
$149.65
- You Save:
-
$23.89
Genuine Whirlpool part
By: Whirlpool
Part Number: 279872
This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.
- Provides precise resistance to reduce voltage/current in the designated dryer circuit
- Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model)
- Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior
- Replace if visibly burned/damaged or if testing shows an open or shorted condition
What's included: One resistor Install notes:
- Disconnect power to the appliance before servicing
- Access the console/wiring harness and note original wire routing
- Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing
- After installation, run a test cycle to ensure proper operation of the affected function
Do-It-Yourself Stories from Customers like You
Timer wouldn't advance on my dryer John L. • Oblong , IL • March 22, 2016
I ordered a new timer and installed it with the help of the videos provided and this did not solve my problem so I chated with the pros @ Appliance Parts Pros and told them my problem and they told me the problem and recommended the part I needed and With the incredibly fast shipping I had the part the next day. I installed it and now my dryer timer works great.Thanks to APPs for their help and ease of ordering and fast shipping. I highly recommend AppliancePartPros and will definitely use...
Read more
More
$46.95
- Compare At:
-
$55.87
- You Save:
-
$8.92
Genuine Frigidaire part
By: Frigidaire
Part Number: 134422700
This is a factory switch used in the appliance's control/safety circuit. Replacing a worn or failed switch restores reliable signaling so the selected function engages properly and the unit responds consistently to user inputs and status conditions.
- Provides an electrical on/off signal to the control or safety circuit
- If faulty, selected functions may not activate or may be intermittent
- Can trigger error codes related to a switch input, depending on model
What's included: 1 switch Install notes:
- Disconnect power before servicing; turn off gas/water if applicable
- Note/photograph wire locations and transfer connectors one at a time
- Verify actuator alignment and secure mounting before reassembly
- After installation, run a test cycle to confirm proper operation
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
The stem of the original switch had been twisted off Benjamin R. • Seattle , WA • April 15, 2019
I removed two sheet metal screws to remove the panel above the washing machine lid. That exposed four more phillips drive sheet metal screws, after removing those the dashboard control panel is held by two smaller black screws slightly recessed in the lower corners. This allowed the panel to be pulled down from the top, revealing the back of the switch. At this point I took a picture of the wiring connections with my cell phone to make sure I put them on the new switch in the same...
Read more
More
$76.95
- Compare At:
-
$91.57
- You Save:
-
$14.62
Genuine Ge part
By: Ge
Part Number: WH12X10510
This selector switch mounts behind the console knob and lets you choose wash settings on your washer. Replacing a worn switch restores reliable selection so the control responds to the setting you intend.
- Allows the user to select a wash option and sends that choice to the timer/control
- Helps when the knob won't click or hold a setting
- Addresses issues where settings don't change or only one option works
- Can resolve dead or intermittent positions on the selector
What's included: 1 selector switch Install notes:
- Disconnect power before servicing
- Access the control console; remove the knob and the switch's retaining hardware
- Move wire connectors from the old switch to the new one one at a time to maintain correct positions
- Secure the new switch, reinstall the knob, and reassemble the console
More
$25.95
- Compare At:
-
$30.88
- You Save:
-
$4.93
Genuine Ge part
By: Ge
Part Number: WH12X10511
This electric pressure switch senses pressure changes and sends a signal to the appliance control, restoring reliable pressure detection and normal operation. Use it when the machine fails to detect pressure or shows pressure-related errors. What it does:
- Detects changes in air/water pressure and converts them to an electrical signal for the control board
- Helps the appliance recognize correct fill, drain, or airflow conditions
- Commonly linked to symptoms such as failure to start, not filling, running continuously, or pressure-related error codes
- Replaces a failed or intermittent pressure-sensing component to restore expected cycling behavior
What's included: One electric pressure switch Install notes:
- Disconnect power before attempting any service to avoid shock or damage
- Label and photograph wiring before removal to ensure correct reconnection
- Test with a multimeter if troubleshooting
Do-It-Yourself Stories from Customers like You
Washer would not fill to the proper level sometimes it would fill agitate a few times turn the pump on and drain a little then fill again sometimes it would pause or a cycle might take all day Andrew K. • Eaton , OH • February 10, 2015
I replaced the water lever/electric pressure switch. Immediately the washer ran like a new machine. No problems pausing or stopping to add water and draining as before. This repair is very simple and takes less than 10 min. All you have to do is remove two phillips screws on the panel just below all the controls. Once removed the pressure switch is on the left side with a clear rubber tube attached with a spring clip. Simply squeeze the clip together with some pliers and slide it down then...
Read more
More
$54.61
- Compare At:
-
$64.99
- You Save:
-
$10.38
Genuine Ge part
By: Ge
Part Number: WH12X10509
This selector switch is the console control that lets you choose washer options. It routes power to the appropriate circuit so the setting you pick—such as temperature or speed—engages reliably during the cycle.
- Interfaces with the control knob to communicate user-selected options to the washer's control
- Common fix when options won't change or only one setting works
- Helps resolve intermittent response or dead spots when turning the selector
- Restores consistent operation of user-selected wash features
What's included: 1 selector switch. Install notes:
- Disconnect power to the appliance before servicing
- Access the control console; remove the rear cover or screws as required
- Note wire positions and transfer connectors to the new switch one at a time
- Secure the switch, reinstall the knob/panel, and test each selection
More
$14.95
- Compare At:
-
$17.64
- You Save:
-
$2.69
Genuine Frigidaire part
By: Frigidaire
Part Number: 134996900
Do-It-Yourself Stories from Customers like You
Agitator was turning on while filling with water Richard M. • Coffeyville , KS • August 21, 2015
Put in water level switch
Read more
More
$80.27
- Compare At:
-
$95.52
- You Save:
-
$15.25
Washer dryer combo switch replacement parts are essential to ensure your appliance continues to perform at its best. These switches play a crucial role in controlling various functions within your washer dryer combo, keeping your clothes clean and dry efficiently.
The washer dryer combo is a true lifesaver for busy households, combining two critical appliances into one compact unit. The parts within this appliance, especially the washer dryer combo switch, are vital for maintaining its functionality. Whether it's starting the wash cycle or switching over to drying, these switches ensure everything works seamlessly. Using high-quality, OEM replacement parts is essential because they guarantee compatibility and durability, allowing your appliance to function as intended by the manufacturer.
If you're looking to keep your washer dryer combo in top working order, rest assured that finding reliable and high-quality washer dryer combo switch replacement parts is just a click away. These parts will help you maintain the efficiency and longevity of your appliance, making laundry day a breeze.
More