Kitchenaid Dishwasher Handle

The Door Latch Assembly is an OEM part for Whirlpool dishwashers. It ensures a secure latch and seal for the dishwasher door during operation.

Causes of a bad dishwasher door latch assembly can include worn-out or broken latch components, damaged or malfunctioning door switches, or misalignment of the latch mechanism.

Symptoms of a bad Dishwasher Door Latch Assembly include:

• Difficulty in closing or latching the dishwasher door
• The dishwasher not starting or running when the door is closed
• Leaks or water spills around the door area
• Inconsistent or intermittent operation of the dishwasher

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Dishwasher Door Latch Handle is an OEM part for Whirlpool dishwashers. It ensures that the dishwasher door closes securely, enabling the machine to operate correctly. This handle engages the latch mechanism, providing a tight seal to prevent leaks and allowing the dishwasher to run its cycles efficiently.

Over time, the door latch handle can wear out or break due to frequent use, exposure to harsh detergents, or mechanical failure. Causes of a bad door latch handle include physical damage, internal component wear, or misalignment.

Symptoms of a bad door latch handle include:

• Difficulty in closing or latching the dishwasher door
• The dishwasher not starting or stopping mid-cycle
• Leaks around the door during operation
• The handle feeling loose or not engaging properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Latch Bracket is an OEM part for Whirlpool dishwashers. This bracket is crucial for securing the dishwasher door latch, ensuring that the door stays closed during operation. A properly functioning door latch bracket helps maintain a tight seal, preventing water leaks and enabling the dishwasher to run efficiently.

Causes of a bad door latch bracket can include regular wear and tear, damage from repeated door openings and closings, or physical impact that compromises its integrity. A malfunctioning bracket can lead to door alignment issues and ineffective sealing.

Symptoms of a bad door latch bracket include:

• The dishwasher door not latching or staying closed
• Water leaking from around the door during cycles
• The door appearing misaligned or loose
• Difficulty starting the dishwasher due to improper door closure

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Handle not included. For black handle use WP8534984. For white handle use WP8534985. For bisque use 8534986

The Door Handle is an OEM part for Whirlpool dishwashers. It provides a sturdy grip for opening and closing the dishwasher door, ensuring easy access to the appliance.

Causes of a bad door handle can include wear and tear from frequent use, accidental impact or force, and material fatigue over time. 

Symptoms of a bad door handle include:

• The handle feeling loose or wobbly
• Difficulty in opening or closing the dishwasher door
• Visible cracks or damage on the handle
• The handle not engaging the door latch correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Stainless   Note: Comes with Allen wrench, spare set screw, and instructions.

This genuine replacement door handle restores a solid, comfortable grip for opening and closing your appliance's door. Replace a cracked, loose, or missing handle to keep daily use safe and the appliance looking factory-clean. What it does:

• Provides the handhold needed to open and close the door
• Transfers pull force to the door without stressing the latch
• Helps ensure the door can be operated safely and consistently
• Common symptoms: handle cracked, broken, loose, spinning, or missing

• 1 door handle

• Disconnect power before servicing; allow hot surfaces to cool
• Protect surrounding surfaces; support the door if required by your model
• Access the mounting screws as directed by your service manual; note screw locations and any spacers
• Tighten screws evenly without overtightening; wear cut-resistant gloves

Color: Black

The Rotating Handle is an OEM part for Whirlpool mixers. It allows you to raise and lower the mixing bowl for convenient access during the mixing process.

A bad rotating handle can be caused by regular use, accidental damage, or excessive force applied during operation. If you notice cracks, a loose or wobbly fit, or difficulty in rotating the handle smoothly, it may indicate a problem with the handle itself.

Symptoms of a bad rotating handle include:

• Cracked or damaged handle surface
• Loose or insecure fit of the handle on the mixer
• Inability to raise or lower the mixing bowl 

Replace your faulty handle with this genuine OEM part to restore your mixer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This chrome handle medallion restores the finished look of a damaged or worn appliance handle by replacing the decorative cover. It improves appearance and helps protect the underlying handle hardware from wear. What it does:

• Replaces a scratched, dented, or faded handle trim piece to renew the appliance's appearance
• Covers and protects the handle mounting area from everyday wear
• Matches chrome finishes for a consistent, factory look
• Helps eliminate cosmetic blemishes that make the appliance look older

• Basic hand tools are typically required; follow the appliance's user manual or parts diagram for correct removal/replacement of the handle
• Remove the handle or access panel carefully to avoid scratching adjacent finishes
• Keep hardware and fasteners organized during disassembly so original parts can be reused

This replacement door handle restores a secure grip and smooth opening for compatible Whirlpool appliances. It replaces worn, cracked or broken handles to improve usability and appearance without replacing the whole door. What it does

• Provides a sturdy handhold to open and close the appliance door
• Replaces cracked, loose or cosmetically damaged handles
• Helps prevent accidental drops or slippage when opening the door
• Matches the original mounting points for a direct-fit replacement

• Remove power and empty the door area before starting any repairs
• Use common hand tools; hold parts steady to avoid scratching finishes
• Follow OEM instructions for fastener torque and alignment

Color: Black

This replacement door handle restores a solid, comfortable grip for opening and closing the refrigerator door. It replaces cracked, broken or loose handles so the door operates safely and reliably. What it does:

• Provides a secure gripping surface to open and close the refrigerator door
• Replaces cracked, broken or missing handles that make the door hard to use
• Restores proper engagement with the door hardware for reliable operation
• Helps prevent accidental drops or further damage from a failing handle

• Disconnect power to the appliance or unplug the refrigerator before starting any work
• Remove any trim or end caps to access mounting screws; retain original hardware unless stated otherwise
• Hand-tighten mounting screws, then snug—do not overtighten to avoid cracking the handle

Color: Bisque

Color: White