Kitchenaid Dishwasher Spring Parts

The Door Balance Spring is an OEM part for Whirlpool dishwashers. This part provides tension and balance to the dishwasher door, ensuring it opens and closes smoothly and stays in the desired position when loading or unloading dishes.  

Causes of damage to the door balance spring can include normal wear and tear from frequent use, corrosion due to moisture and detergent exposure, or mechanical failure from excessive force being applied to the door.  

Symptoms of a bad Door Balance Spring include:

• The dishwasher door falling open too quickly or with too much force 
• Difficulty in keeping the door open or having it snap shut unexpectedly 
• A noticeable difference in the effort required to open or close the dishwasher door 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Door Handle Spring is an OEM replacment part for Whirlpool built-in dishwashers. It applies inward tension to assist in opening the dishwasher door after a cycle completes. Proper spring force prevents accidental openings during active washing and rinsing stages.

Symptoms of a failing door handle spring can include: 

• Difficulty opening the dishwasher door at the end of a cycle  
• Potential opening of the door unintentionally during operation
• Sagging or loose door that does not securely latch in closed position

Causes related to the natural fatigue of the coiled wire over thousands of usage cycles. Loss of elastic properties compromises the spring's ability to counteract the weight and seal force of the heavy dishwasher door panel.

This OEM Whirlpool replacement spring restores smooth, convenient door access at appropriate times. Compatible also with some KitchenAid models.

The Dishwasher Door Spring is an OEM replacement part for Whirlpool dishwashers. It helps with smooth opening and closing by providing a well-balanced counterforce. 

Causes can involve coils weakening from repeated engagements over time. Metal fatigue diminishes recoil capabilities as well reducing assistive power.

Symptoms of a problematic spring include:

• Sagging or loosely fitting doors
• Difficulty fully opening or closing door
• Noises occurring from unbalanced movement

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore dishwashers.

Dishwasher door balance spring. Also check the door balance link kit 8194001.

The Control Plate Spring is an OEM part for Whirlpool stand mixers. This spring maintains the proper tension and alignment of the control plate, ensuring the smooth operation and accurate adjustment of the mixer speeds.

Causes of a bad control plate spring can include wear and tear over time, stretching from continuous use, or damage due to overloading the mixer.

Symptoms of a bad control plate spring include:

• Difficulty in adjusting mixer speeds
• Mixer speeds not responding accurately to control adjustments
• Loose or unresponsive control lever
• Unusual noises during speed changes

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Door Spring is an OEM part for Whirlpool dishwashers. It helps balance and support the dishwasher door, allowing it to open and close smoothly and stay in position during use.

Causes of a bad door spring can include metal fatigue from repeated use, corrosion, or physical damage from accidental mishandling.

Symptoms of a bad dishwasher door spring include:

• The door dropping open too quickly
• Difficulty in opening or closing the door
• The door not staying securely in place
• Uneven movement or sagging of the door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replacement spring kit that restores proper tension and balance to appliance doors and lids, helping them open and close smoothly and stay in position. Use this kit to replace worn or broken springs that cause sagging or noisy operation. What it does:

• Replaces worn or broken door/lid springs to restore proper tension and balance.
• Helps the door or lid open and close smoothly and remain in the desired position.
• Reduces sagging, bouncing, slamming, and related noise caused by failed springs.
• Prevents additional wear on hinges and closures by restoring correct alignment and support.

• Disconnect power (and water, if applicable) before starting any repair; follow all safety instructions in the appliance manual.
• Support the door or lid during removal and installation to avoid pinch or crush injuries.
• Use proper hand protection and tools; keep small fasteners organized to avoid loss.

This handle spring restores tension to the door latch handle so the dishwasher door latches securely and the handle returns to position. Replace a worn or broken spring to address loose handle feel or doors that pop open during a cycle. What it does:

• Provides return tension for the door latch/handle mechanism
• Helps keep the door closed and latched during operation
• Restores proper handle feel and return action
• Common symptoms include a loose or floppy handle, door not latching or starting, or door opening mid-cycle

• 1 spring

• Disconnect power at the breaker and shut off water before servicing
• Remove inner door panel screws to access the latch area; support the outer panel
• Note spring orientation and attachment points before removal; transfer the new spring to the same tabs/holes
• If your latch uses two springs, replace both for even tension; test latch operation before reassembly

This replacement spring restores the correct tension and return action for its connected mechanism so your appliance operates smoothly. Install it to replace a broken or fatigued spring and resolve weak, inconsistent, or non-returning movement. What it does:

• Provides tension so linked parts move and return to their proper position
• Helps keep mechanisms aligned and operating smoothly
• Replaces stretched, broken, or missing springs that cause poor operation
• Common symptoms: part won't return or stay in place, weak/sluggish action, rattling or rubbing noises

• 1 spring

• Disconnect power before servicing; shut off water or gas if applicable
• Note the original spring routing and orientation; take a quick photo before removal
• Control spring tension during removal/installation to avoid snapback; wear cut-resistant gloves and eye protection
• Use suitable pliers/spring tool and inspect adjacent brackets or links for wear while reassembling

This door spring counterbalances the door so it opens smoothly and doesn't drop. Replacing a fatigued or broken spring restores proper door feel and helps protect hinges and related components from excess strain.

• Provides the tension that balances the door during opening and closing
• Helps prevent the door from slamming or falling open too quickly
• Replaces a stretched, weakened, or broken spring
• Common signs: door feels heavy, drops quickly, or sits unevenly side-to-side

• Disconnect power before servicing; for dishwashers, also shut off the water supply
• Support the door and carefully relieve spring tension before removal
• Install the new spring in the same attachment points/orientation as the original
• Replace both together to maintain even tension