Kitchenaid Dishwasher Gasket & Seal

The Lower Door Seal is an OEM replacement part for Whirlpool dishwashers. This seal runs along the bottom edge of the dishwasher door, creating a tight seal against the tub when closed to contain water inside during cycles.  This seal measures approximately 22 inches in length

Causes of lower door seal failure commonly involve repeated compression stresses from opening/closing actions gradually stiffening the flexible gasket material. Drying out and cracking occurs over years of heat exposure as well.

Symptoms of a worn lower door seal include:

• Water leaking out from beneath dishwasher door during cycles
• Difficulty latching door completely from warped seal edges  
• Visible cracks, splits or brittleness along the length of the seal
• Gaps allowing water intrusion beneath door perimeter

This versatile OEM part is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore dishwasher models.

The Lower Door Seal is an OEM replacement part for Whirlpool refrigerators. It plays a crucial role in maintaining the proper seal between the refrigerator door and the cabinet, ensuring energy efficiency and consistent temperature control.

Causes of needing to replace the lower door seal can include normal wear and tear over time, exposure to extreme temperatures or UV light, or physical damage due to impact or mishandling.

Symptoms of a faulty lower door seal include:

• Difficulty in closing the refrigerator door properly
• Visible gaps or gaps around the door seal area
• Condensation buildup or frost formation around the door seal
• Increased energy consumption due to inefficient sealing

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Gasket and Strike Kit is an OEM part for Whirlpool dishwashers, designed to ensure a tight and leak-proof seal around the dishwasher door. This kit includes a door gasket and a door strike, both crucial components in preventing water from leaking out during the wash cycle. 

Causes of a bad Gasket and Strike Kit can include normal wear and tear from regular use, leading to a loss of elasticity in the gasket.

Symptoms of a bad Gasket and Strike Kit include:

• Water leaking from around the dishwasher door.
• Difficulty closing the dishwasher door or ensuring it stays latched during operation.
• Visible signs of wear, such as cracks or hardening on the gasket, or bending or damage to the strike.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Transmission Gasket is an OEM part for Whirlpool mixers. It serves as a seal to prevent leaks and maintain the integrity of the transmission housing, ensuring that the internal components are protected from moisture and contaminants.

Causes of a bad transmission gasket can include wear and tear over time, exposure to harsh cleaning chemicals, or improper installation. Damage to the gasket can lead to leaks, which can compromise the mixer's performance and potentially damage other internal components.

Symptoms of a bad transmission gasket include:

• Leaking oil or grease from the mixer's transmission area
• Unusual noises during operation
• Reduced efficiency in mixing performance
• Visible damage or wear on the gasket itself

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Cabinet Seal is an OEM part for Whirlpool dishwashers. This seal is crucial for preventing water leaks by creating a watertight barrier between the dishwasher tub and the door. It ensures that water stays inside the dishwasher during the wash cycle, maintaining the appliance's efficiency and protecting your kitchen from water damage.

You should replace this cabinet seal if it becomes damaged, worn out, or loses its elasticity. Causes of a bad cabinet seal can include regular wear and tear, exposure to high temperatures, or buildup of detergent and mineral deposits, which can degrade the seal material over time.

Symptoms of a bad cabinet seal include:

• Water leaking from the bottom or sides of the dishwasher door
• Visible cracks or tears in the seal
• Increased moisture or puddles around the dishwasher
• A loose or improperly seated seal

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Seal is an OEM part for Whirlpool dryers. It forms a tight seal around the dryer door, preventing heat from escaping and ensuring efficient drying performance. This seal helps to maintain the internal temperature of the dryer, optimizing energy use and improving drying results.

Causes of a bad door seal can include wear and tear from regular use, damage due to improper handling or cleaning, or deterioration over time. A compromised door seal can affect the efficiency of the dryer and lead to potential safety issues.

Symptoms of a bad door seal include:

• Heat escaping from the dryer door
• Longer drying times
• Higher energy consumption
• Visible wear or damage to the seal

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Motor Housing Seal is an OEM part for Whirlpool stand mixers. It is designed to create a secure seal around the motor housing, preventing dust, moisture, and other contaminants from entering and damaging the motor. This seal ensures the longevity and optimal performance of the mixer.

Causes of a bad motor housing seal can include general wear and tear over time, exposure to harsh cleaning chemicals, or mechanical stress from frequent use. These factors can lead to the seal deteriorating and losing its effectiveness.

Symptoms of a bad Motor Housing Seal include:

• Visible cracks or splits in the seal
• Dust or debris inside the motor housing
• Reduced performance of the mixer
• Unusual noises or overheating during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Gasket is an OEM part for Whirlpool dishwashers. This gasket seals the gap between the dishwasher door and the main tub, preventing water from leaking out during the wash cycle. It ensures a watertight seal that helps maintain the efficiency and performance of the dishwasher.

 Over time, the gasket can deteriorate due to regular use, exposure to heat, and contact with detergents. A faulty gasket can lead to water leaks, which may cause damage to surrounding cabinetry and flooring.

Symptoms of a bad dishwasher gasket include:

• Water leaking from the bottom or sides of the dishwasher door
• Visible cracks or tears in the gasket
• The dishwasher door not closing properly
• Increased noise levels during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Float Switch Base Gasket is an OEM part for Whirlpool dishwashers. This gasket is specifically designed to seal the area around the float switch base, preventing water leaks that can occur during the dishwasher's operation. 

Causes of damage to the Float Switch Base Gasket often involve normal wear and tear, as the rubber or plastic material can degrade over time due to exposure to detergents, hot water, and the mechanical action of the float switch. 

Symptoms of a bad Float Switch Base Gasket include:

• Water leaking from the bottom of the dishwasher
• Signs of water damage or corrosion around the float switch area
• The dishwasher may malfunction or display error codes related to water filling issues if water leaks interfere with the float switch operation.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Center Shaft O-Ring is an OEM part for Whirlpool mixers. This small but crucial component provides a watertight seal around the center shaft, preventing liquids and ingredients from leaking out of the mixer during operation. It helps ensure the smooth and efficient performance of the mixer by maintaining a proper seal.

Over time, the center shaft O-ring can become worn, cracked, or damaged due to regular use, exposure to various mixing ingredients, and the constant motion of the mixer. When the O-ring is compromised, it can lead to leaks and reduced mixing efficiency.

Symptoms of a bad center shaft O-ring include:

• Leaking of liquids or ingredients from the mixer
• Reduced mixing efficiency or performance
• Visible wear, cracks, or damage to the O-ring
• Difficulty in achieving a proper seal during use

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lower Door Seal Kit is an OEM part for Whirlpool dishwashers. It is designed to create a watertight seal along the bottom of the dishwasher door, preventing leaks during the wash cycle. The kit comprises a main bottom seal, two corner seals, and installation instructions. The main seal measures approximately 22 inches x 1/2 inch.

You should replace this lower door seal kit if it becomes worn or damaged. Causes of a bad door seal can include deterioration from age, damage from repeated door closures, or buildup of grime and debris that compromise the seal's integrity.

Symptoms of a bad lower door seal include:

• Water leaking from the bottom of the dishwasher door
• Visible cracks or wear on the seal
• The dishwasher door not closing properly
• Increased humidity or water damage around the dishwasher area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Toe Panel Insulation is an OEM part for Whirlpool dishwashers. This part was designed to enhance the appliance's performance by reducing noise and preventing heat escape from the bottom of the dishwasher. This insulation panel fits snugly behind the dishwasher's toe panel, which is located at the lower front part of the unit. 

Causes of a bad Toe Panel Insulation might include wear and tear over time, damage during appliance installation or removal, or deterioration due to moisture exposure. 

Symptoms of inadequate or damaged Toe Panel Insulation include:

• Noticeable increase in noise level from the dishwasher, making it more disruptive during its operation.
• Excess heat felt near the base of the dishwasher, indicating heat loss.
• Potential for condensation or slight temperature changes in the kitchen due to the heat emitted from the dishwasher.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Motor Shaft Seal is an OEM component for Whirlpool stand mixers. It is a mechanical component that forms a perimeter around the motor shaft opening, protecting internal parts from debris intrusion. Maintaining an airtight seal prevents contaminants from disrupting operations.

Symptoms of a damaged motor shaft seal include:

• Flour, wet ingredients, or dust leakage at the motor housing connection  
• Premature motor failure due to abrasive particle penetration
• Grinding or scraping noises emanating from the shaft area during use
• Reduced mixing power and inability to smoothly knead doughs

Causes usually relate to typical wear over long-term, repeated use of the mixer. Constant rotational motion against the sealing material results in damage like cracking or splits compromising its integrity.

This OEM Whirlpool replacement restores protective shielding for the motor. Compatible brands are KitchenAid, Sunbeam, Hamilton Beach, and some Kenmore stand mixers.

The Rear Drum Felt Seal with Adhesive is an OEM part for Whirlpool dryers. This part creates a tight seal at the rear of the dryer drum. This seal prevents hot air from escaping the drum during cycles, ensuring efficient and even drying of clothes. 

Causes of a deteriorating rear drum felt seal can range from normal wear and tear, excessive heat exposure, to mechanical issues that cause misalignment or excessive wear on the seal itself.

Symptoms of a bad Rear Drum Felt Seal include:

• Clothes taking longer to dry or not drying thoroughly
• Increased lint outside the dryer or in the venting system
• Unusual noises during operation, indicating a gap or friction issue
• Heat escaping from the rear of the dryer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Air Vent Gasket is an OEM part for Whirlpool dishwashers. It is designed to seal the air vent, preventing water from leaking out during the dishwasher's operation. This gasket plays a critical role in maintaining the efficiency and effectiveness of your dishwasher by ensuring a watertight seal around the air vent, which is essential for the proper function of the venting system.

Causes of a bad Air Vent Gasket can include wear and tear over time, leading to cracks or deterioration, improper installation, which may result in a poor seal, or damage from harsh cleaning chemicals.

Symptoms of a bad Air Vent Gasket include:

• Water leaking from around the dishwasher's door.
• Dishes not drying properly due to compromised venting.
• Visible signs of wear or damage on the gasket itself.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Front Bearing and Seal Kit is an OEM replacement part for Whirlpool dryers. This kit includes the front bearing and seal for the dryer drum, which work together to provide smooth operation and prevent premature wear.

Causes of a bad front bearing and seal can include regular wear and tear from normal use, heavy loads that place extra strain on the bearings, or debris accumulation causing increased friction.

Symptoms of issues include:

• Noisy or grinding sounds coming from the drum area
• Vibration noticed during the operation
• Difficulty turning or rotating the dryer drum by hand
• Reduced efficiency and longer drying times

This OEM replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.