Kitchenaid Refrigerator Drawer, Shelf, Pan

This pan assembly sits under the appliance tub or base to catch and direct water away from internal components, helping contain leaks and prevent water damage. It replaces a damaged, cracked or warped pan. What it does:

• Collects and channels leaking or overflowing water away from electronics and flooring
• Restores the appliance's original drip containment and sealing surface
• Helps stop visible water pooling beneath the appliance
• Supports proper routing to drain points when used with the factory drain path

• Disconnect power and water supply before starting any repair
• Remove access panels and any components blocking the pan
• Handle carefully; edges may be sharp and gaskets or clips can be brittle with age
• Secure any fasteners, hoses, or seals to prevent new leaks

This replacement bin control lever secures the refrigerator door shelf bin so it stays in place and removes easily when you need to clean or reorganize. Restores proper bin engagement and reduces rattling or inadvertent drops. What it does:

• Latches and supports the door shelf bin so it stays securely in place
• Allows the bin to release smoothly for removal and cleaning
• Stops bin wobble and rattling caused by a worn or broken lever
• Common symptom: bin falls out, won't engage, or feels loose when closing the door

• One bin control lever

• Disconnect power or unplug the appliance before starting repairs
• Empty the door bin and remove any shelves needed for access
• Remove the old lever, then snap or fasten the replacement into the same mounting points
• If resistance is met, double-check alignment—do not force parts.

This track is the replacement rack guide that supports and guides a dishwasher or oven rack so it slides smoothly in and out. It restores proper rack alignment and prevents the rack from sticking or tipping. What it does:

• Provides a smooth sliding surface for a rack to roll or glide along
• Restores proper rack alignment to prevent tipping and rubbing
• Replaces worn, cracked, or broken guides that cause sticking or noisy operation
• Compatible with factory mounting points to maintain original movement

• Disconnect power and water (if applicable) before servicing the appliance
• Remove the affected rack and any retaining clips or screws to replace the track
• Tighten fasteners securely and test rack movement after installation

This slide is the replacement guide that lets an oven or warming drawer open and close smoothly, restoring proper support and alignment for the drawer. Durable, low-profile fit that helps reduce sticking and uneven movement. What it does:

• Guides and supports the oven/warmer drawer during use for smooth sliding action
• Helps prevent the drawer from binding, catching, or coming off the track
• Reduces noise and uneven movement caused by worn or damaged guides
• Restores correct alignment so the drawer closes flush and operates reliably

• Disconnect power to the appliance before beginning any repair
• Remove the drawer per the appliance service instructions to access the existing slide
• Compare the new slide to the old part for proper orientation before installing
• Tighten fasteners securely and test drawer operation; do not force components

This wire shelf provides a sturdy, ventilated storage surface for the refrigerator compartment so food and containers stay organized and airflow is maintained. It replaces a damaged, bent, or missing shelf to restore usable shelving space. What it does:

• Supports refrigerated items and helps keep food off the liner so spills drain to the pan below
• Maintains airflow with open-wire design to help even cooling on the shelf level
• Replaces bent, rusted, or broken wire shelving that no longer holds items securely
• Fits into existing shelf supports or rails for a straightforward replacement

• Slide or snap the shelf into the existing shelf supports or rail positions; confirm correct orientation before seating
• Inspect shelf supports and rails for damage; replace damaged supports before installing the new shelf
• Wear gloves to protect hands from sharp wire ends during handling and installation
• Do not overload the shelf beyond the cabinet's designed capacity

Right hand side

This refrigerator snack pan is the small-item drawer in the fresh food compartment. Replacing a cracked or missing bin restores smooth sliding access and helps keep deli meats, cheeses, and snacks organized and contained. What it does:

• Provides a dedicated drawer for snacks and small items in the fresh food section
• Slides on the factory rails for easy access and organization
• Helps contain minor spills and prevents items from falling into lower areas
• Common signs it's time to replace: cracked or broken bin, damaged front lip, falls off track, or won't slide smoothly

• 1 refrigerator snack pan

• Remove food; lift the front slightly to disengage the old pan from the rails, then pull straight out
• If needed, remove the glass shelf above for clearance
• Inspect and clean the rails/supports before installing the new pan
• Align the new pan on the rails and slide in until fully seated—do not force

The Snack Pan is an OEM part for Whirlpool refrigerators. It is designed as a storage compartment that slides into the fridge, providing a convenient space to store snacks, deli items, or small food packages. 

Causes of a bad Snack Pan can include cracking, warping due to overloading, or damage from impacts, which compromise the pan's functionality and aesthetic appeal.

Symptoms of a bad Snack Pan include:

• Difficulty sliding the pan in or out due to misalignment
• Cracks or breaks that can lead to spills or leaks in the refrigerator
• Warping that prevents the pan from sealing properly and maintaining temperature

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is the refrigerator compartment deli/meat drawer pan. It replaces a cracked or missing bin so your items store neatly and the drawer slides and functions as intended.

• Provides a shallow storage bin for deli meats, cheeses, and small items in the fresh food section
• Slides on the existing shelf rails for easy access and organization
• Helps keep items contained to minimize spills and crushing
• Replace if the bin is cracked, has broken tabs, won't slide or align on the rails, or is missing

• Disconnect power before servicing; remove food from the area
• Align the drawer with both rails and slide it straight in until fully seated
• If needed, pull the supporting shelf forward slightly to engage the guides
• Handle room-temperature plastic gently; avoid forcing the bin to prevent cracking