Kitchenaid Refrigerator Drawer, Shelf, Pan

The Glass Shelf is an OEM part specifically designed for Whirlpool refrigerators. Its see-through design allows items to be viewed from all angles while preserving space. 

Symptoms of a bad glass shelf include:

• Cracks or fractures that compromise structural integrity
• Bowing or sagging of the surface underweight  
• Chips or scratches that diminish visibility  

Causes may involve repeated temperature changes that stress the material. Accidental drops or improperly distributed heavy loads are also potential culprits.

Replacing with a genuine Whirlpool shelf prevents further damage from occurring. Its precision edge-to-edge fitment with rails ensures proper sliding and maximum storage optimization.  

This OEM replacement is compatible with Maytag, KitchenAid, Jenn-Air, and other brands for a direct refresh. Reliability and lifespan are restored to keep contents organized for years to come.

The Storage Bin is an OEM part for Whirlpool refrigerators. It provides organized, adjustable storage space in the refrigerator door. The bin has been designed to hold condiments, beverages, snacks, and other small refrigerator items. 

Causes of a bad storage bin can include broken hinges or mounting clips, cracks or holes in the plastic material, or a bent or warped bin that no longer sits securely or organizes items well.

Symptoms of a bad storage bin include:

• Items falling out of the bin 
• Bin not sitting flush or securely in the door
• Difficulty removing or replacing the bin
• Cracked or damaged plastic that affects functionality

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Snack Pan is an OEM part for Whirlpool refrigerators. It provides a designated space for storing snacks and small items within your refrigerator.

A bad snack pan can be caused by regular use, accidental damage, or exposure to spills and stains. If you notice cracks, discoloration, or a broken structure in the snack pan, it may indicate a problem with the pan itself.

Symptoms of a bad snack pan include:

• Cracked or damaged pan surface
• Discoloration or staining of the pan
• Inability to open or close the drawer

Replace your faulty snack pan with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Utility Pan is an OEM part for Whirlpool refrigerators. It is a storage drawer for various items in your refrigerator, such as deli meats, cheeses, and other small food items.

A bad utility drawer pan can be caused by regular use, accidental damage, or wear and tear over time. If you notice cracks, breaks, or warping in the pan, it may be time to replace it.

Symptoms of a bad utility drawer pan include:

• Cracks or breaks in the pan
• Warping or misalignment of the pan
• Difficulty in opening or closing the drawer

Replace your damaged or worn-out utility drawer pan with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This rail is a direct-replacement support rail used in compatible Whirlpool appliances to restore proper component alignment and movement. It helps maintain smooth operation of the related assembly and prevents excessive wear on connected parts. What it does:

• Provides structural support and guidance for the moving assembly it mounts to
• Keeps panels, drawers or components aligned to prevent binding or uneven wear
• Restores smooth movement when a worn or damaged rail causes sticking or misalignment
• Helps prevent rattling or vibration from a loose or broken support rail

• One replacement rail

• Turn off power to the appliance and follow the manufacturer's safety instructions before starting work
• Use appropriate tools and retain all fasteners; inspect adjacent components while replacing the rail

The Snack Pan is an OEM part for Whirlpool refrigerators. This pan provides a designated storage area for snacks and small food items, helping to keep the refrigerator organized and maximizing storage efficiency. It slides in and out for easy access, making it convenient to reach stored items.

Causes of a bad snack pan can include cracking or breaking due to mishandling, wear and tear over time, or damage from heavy items being placed inside. 

Symptoms of a bad snack pan include:

• Cracks or breaks in the plastic
• Difficulty sliding the pan in and out
• The pan not fitting securely in its designated spot
• Visible wear that compromises its integrity

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This ice bucket and trim assembly replaces the fridge's ice storage container and surrounding trim, restoring secure ice storage and a finished appearance. Designed to collect ice from the icemaker so ice is contained and accessible. What it does:

• Collects and stores ice produced by the refrigerator icemaker.
• Trim secures the bucket in place and helps guide ice toward the dispenser or access area.
• Replaces cracked, broken, or warped buckets that cause ice spills, poor seating, or difficulty removing the bucket.
• Helps prevent loose ice and improves dispenser/door alignment when the original bucket or trim is damaged.

• Disconnect power to the refrigerator and remove stored ice and food from the work area before starting.
• Remove the old bucket per your refrigerator's service or owner manual—lift/tilt or unclip any retaining tabs as required.
• Install the new bucket and align the trim so tabs engage; do not force parts—inspect for proper seating.
• Restore power and run the icemaker/dispenser through a test cycle; discard the first batch of new ice.

The Pan Front is an OEM part for Whirlpool refrigerators. It serves as the front panel of the crisper drawer, providing a sleek and functional storage solution for your fruits and vegetables. It features a transparent design that allows you to easily view the contents of the crisper drawer while keeping them fresh and organized.

Causes of a bad crisper drawer pan front can include accidental impacts, cracking or breaking due to heavy items being placed inside the drawer, or regular wear and tear over time. If you notice symptoms such as a cracked or damaged front panel, difficulty in sliding the drawer in and out, or a compromised seal that affects the freshness of your produce, it may be time to replace the crisper drawer pan front.

Symptoms of a bad crisper drawer pan front include:

• Cracked or damaged front panel
• Difficulty in sliding the drawer in and out
• Compromised seal affecting the freshness of produce

Improve the functionality and appearance of your Whirlpool refrigerator by replacing the damaged or worn-out crisper drawer pan front with this genuine OEM part.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This shallow freezer door bin mounts on the inner door and restores organized storage for smaller items. Replace a cracked, loose, or missing bin to keep packages secure and easy to access.

• Creates a dedicated shelf on the freezer door for boxed or bagged foods
• Replaces bins with cracked plastic, broken locking tabs, or discoloration
• Helps prevent items from falling when the door opens and closes
• Restores a secure fit if the original bin won't seat or keeps popping off

• Empty and remove the old bin by lifting up to release it, then pulling out
• Align the new bin with the door liner slots and press down until fully seated
• Handle plastic carefully; install at room temperature to reduce risk of cracking
• No tools typically required; match position and orientation to the original bin

This basket front replaces the plastic panel on the front of a freezer wire basket. It restores a solid barrier so food stays contained and helps the basket slide in and out smoothly.

• Attaches to the front of the freezer wire basket to create a secure face
• Helps prevent items from falling out of the basket
• Replaces cracked, warped, or missing fronts
• Can improve basket handling and alignment when opening/closing

• Unplug the refrigerator before servicing
• Remove the basket from the freezer and place on a flat surface
• Release the damaged front and align the new front with the basket wires; press until fully seated
• Reinstall the basket and verify smooth operation

This shelf stud secures a refrigerator shelf to the cabinet liner so the shelf stays level and stable. Replaces a cracked or missing stud to restore proper shelf seating and prevent sudden shelf drops. What it does

• Locks a refrigerator shelf into the cabinet liner and holds the shelf edge in place.
• Prevents shelf sagging, shifting, or sudden falls when loading items.
• Stops rattling or loose shelf movement caused by a broken or worn stud.
• Simple replacement fix when a plastic stud is cracked, stripped, or missing.

• Unplug the appliance or shut off power before service to avoid electrical hazard.
• Remove the shelf or glass first to access the mounting point; handle glass with care and wear gloves.
• Press or snap the stud into the liner hole until fully seated; avoid forcing or over-stressing the liner.

This freezer basket holds and organizes frozen foods inside your refrigerator freezer, keeping items accessible and preventing loose product from shifting. Durable molded construction fits into the freezer compartment for reliable storage. What it does:

• Provides a removable storage bin to organize frozen items and maximize usable freezer space
• Keeps small or loose packages contained so they don't fall behind shelves
• Makes loading and unloading faster by grouping items in one accessible tray
• Visible, open-top design helps you see contents at a glance

• One freezer basket

• Always unplug the appliance or disconnect power before servicing
• Remove all food and empty the freezer compartment before installing
• Slide basket into existing guides or supports until it seats securely; no special tools generally required
• Inspect mounting rails or supports for damage and replace if worn to ensure proper fit

This replacement freezer bin restores a missing, cracked, or worn freezer storage drawer so you can keep frozen foods organized and contained. Fits behind the freezer door and rehabs normal shelf/drawer function. What it does:

• Holds and organizes frozen food items inside the freezer compartment
• Replaces cracked, broken, or warped drawer bins that no longer slide or seal
• Helps prevent items from falling onto lower shelves and improves access
• Compatible with oven/freezer drawer tracks and slides used by the OEM design

• Remove all contents and unplug or switch off the appliance power before service
• Slide out existing bin and lift to disengage; align new bin on tracks and slide into place
• Inspect rails and guides for damage; replace any damaged hardware separately

This grille enclosure replaces a damaged lower front grille to restore the appliance's appearance and protect internal components. It provides a secure cover that helps direct airflow and prevents debris from entering the cabinet. What it does:

• Covers and protects lower front components from dirt, dust and accidental contact
• Helps direct airflow around vents and intake areas for proper operation
• Restores a finished, gap-free appearance when the original grille is cracked or broken
• Reduces rattling caused by loose or damaged grille pieces

• One lower front grille enclosure

• Disconnect power before starting any repair to avoid electrical shock
• Remove nearby panels or kickplate screws/clips as needed for access
• Align tabs and secure with the factory screws or clips; do not force or bend mounting tabs

This pan assembly sits under the appliance tub or base to catch and direct water away from internal components, helping contain leaks and prevent water damage. It replaces a damaged, cracked or warped pan. What it does:

• Collects and channels leaking or overflowing water away from electronics and flooring
• Restores the appliance's original drip containment and sealing surface
• Helps stop visible water pooling beneath the appliance
• Supports proper routing to drain points when used with the factory drain path

• Disconnect power and water supply before starting any repair
• Remove access panels and any components blocking the pan
• Handle carefully; edges may be sharp and gaskets or clips can be brittle with age
• Secure any fasteners, hoses, or seals to prevent new leaks

This replacement bin control lever secures the refrigerator door shelf bin so it stays in place and removes easily when you need to clean or reorganize. Restores proper bin engagement and reduces rattling or inadvertent drops. What it does:

• Latches and supports the door shelf bin so it stays securely in place
• Allows the bin to release smoothly for removal and cleaning
• Stops bin wobble and rattling caused by a worn or broken lever
• Common symptom: bin falls out, won't engage, or feels loose when closing the door

• One bin control lever

• Disconnect power or unplug the appliance before starting repairs
• Empty the door bin and remove any shelves needed for access
• Remove the old lever, then snap or fasten the replacement into the same mounting points
• If resistance is met, double-check alignment—do not force parts.