Kitchenaid Refrigerator Drawer, Shelf, Pan

This refrigerator crisper drawer replaces a damaged or missing produce bin. It restores smooth-sliding, dedicated storage for fruits and vegetables to keep the crisper area organized and easy to use.

• Holds and organizes produce in the refrigerator's crisper compartment; slides on the side rails beneath the crisper cover
• Replace when cracked, warped, or missing
• Common symptoms: broken corners, drawer binds or falls off tracks, or produce can't be stored properly
• Restores proper fit and smooth operation of the crisper section

• Remove food, pull the old drawer out to the stop, lift slightly to clear the rails, and remove
• Align the new drawer on the rails and slide straight in until fully seated
• Let cold plastic warm to room temperature before installation; do not force into place
• If removing shelves or covers for access, handle glass carefully; unplug the appliance if you'll be working near electrical components

This is the door bin frame used on select refrigerators. It supports the clear bin/front, creating a sturdy storage shelf on the inner door for bottles, condiments, and other items. Replace a cracked or missing frame to restore secure door storage.

• Holds and supports the door bin/front on the refrigerator door
• Helps keep items organized and stable during door opening/closing
• Common failure signs include cracks, breaks, or a bin that won't stay seated
• Replacing restores proper fit and capacity of the door storage area

• Unplug the appliance before servicing
• Remove the existing bin components; transfer any reusable inserts/fronts
• Align the new frame with the door mounting slots and snap/slide into place
• Ensure the bin is fully seated and level before loading items

The Pan-Snack is an OEM part for Whirlpool refrigerators. This component, often referred to as the snack drawer, is designed to provide a convenient storage solution within the refrigerator for small items such as snacks, cheeses, and deli meats. The pan-snack ensures these items are organized and easily accessible, contributing to the overall functionality and tidiness of the refrigerator.

Causes of a bad snack pan can include cracks or breaks due to impact or heavy loads, warping from temperature fluctuations, or general wear and tear over time. These issues can compromise the pan's functionality and the overall organization within the refrigerator.

Symptoms of a bad pan-snack include:

• Cracks or breakage in the plastic
• Difficulty sliding the drawer in and out
• Items not staying organized or securely in place
• Visible wear or warping

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

RIGHT HAND GLIDE

The Glass Shelf is an OEM part for Whirlpool refrigerators. These durable shelves provide versatile storage and organization within the refrigerator and freezer compartments. The tempered glass shelves are resistant to chipping and cracking even under the weight of heavy items.  

Causes of a bad shelf can include broken glass from heavy impacts, long-term wear and tear from repeated loading/unloading of items, or damage from accidental dropping of objects onto the shelf.

Symptoms of a bad shelf include:

• Visible cracks, chips, or holes in the glass surface
• Warping or bending of the frame/rails over time
• Inability to securely hold stored items without collapsing

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is the refrigerator compartment deli/meat drawer pan. It replaces a cracked or missing bin so your items store neatly and the drawer slides and functions as intended.

• Provides a shallow storage bin for deli meats, cheeses, and small items in the fresh food section
• Slides on the existing shelf rails for easy access and organization
• Helps keep items contained to minimize spills and crushing
• Replace if the bin is cracked, has broken tabs, won't slide or align on the rails, or is missing

• Disconnect power before servicing; remove food from the area
• Align the drawer with both rails and slide it straight in until fully seated
• If needed, pull the supporting shelf forward slightly to engage the guides
• Handle room-temperature plastic gently; avoid forcing the bin to prevent cracking

The Front Panel is an OEM part for Whirlpool refrigerators. This part is the drawer front with the integrated handle.

Causes of a bad drawer front panel include damage from overloading or forcefully slamming drawers. General wear over many cycles of use can also weaken plastic and cause breaks or cracks.

Symptoms of a failing drawer front panel include:

• Handles detaching from panel placement
• Scratches, scuffs or gouges in the surface
• Difficulty sliding drawers open fully
• Improper track engagement or alignment issues

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This crisper pan is the refrigerator's produce drawer. It replaces a cracked or missing bin to restore a clean, dedicated space for fruits and vegetables and smooth slide-in/slide-out access in the fresh food section. What it does:

• Provides a dedicated compartment to organize produce in the fresh food compartment
• Helps contain spills to protect shelves and liners below
• Slides on the factory rails for easy access and removal
• Common failure signs: cracks, chips, warping, staining, or a drawer that won't slide or stay on its tracks

• 1 crisper pan

• Disconnect power to the refrigerator before servicing
• Empty the old bin and slide it straight out of the tracks
• Clean and inspect tracks/rollers for debris or damage before installing
• Align the new pan with the tracks and slide it fully in; do not force

This refrigerator meat pan is the clear deli drawer that slides inside the fresh food compartment to organize and contain meats, cheeses, and snacks. Replace a cracked, warped, or missing bin to restore smooth sliding and reliable storage capacity.

• Provides a dedicated storage bin in the refrigerator compartment for deli items
• Slides on existing rails for easy access and organization
• Helps contain small spills and prevents items from falling off the shelf
• Replaces a cracked, warped, or missing drawer that binds, falls, or won't stay on track

• Fully extend and lift the old drawer off the rails; remove the shelf above if needed.
• Transfer any reusable trim from the original pan if required.
• Align the new pan with the tracks and slide straight back until seated.
• Handle glass shelves carefully; avoid forcing the rails or overloading the bin.

This refrigerator crisper pan replaces a damaged or missing produce drawer. It restores smooth sliding access and dedicated storage for fruits and vegetables, keeping spills contained and fresh items organized in the fresh-food compartment.

• Provides a dedicated bin for fruits and vegetables
• Helps contain drips and debris to protect shelves and liners
• Slides on existing rails for easy access to contents
• Common symptoms: cracked or broken bin, warped drawer, broken front lip/tab, won't slide or stay on track, or missing drawer

• Disconnect power and clear the crisper area before handling parts
• Remove the old drawer; clean and inspect the tracks/rails
• Transfer any reusable trim or inserts from the old drawer if applicable
• Align the new pan with the tracks and slide it fully into place

This spur gear is part of the appliance's drive assembly, transferring motor power to mating components. Replacing a worn or stripped gear restores smooth, consistent motion and helps eliminate grinding, slipping, or no-drive issues. What it does

• Transfers rotational power within the drive mechanism
• Maintains proper engagement with mating gear(s) for smooth operation
• Common failure symptoms: grinding/clicking noises, slipping or stalled movement, irregular motion
• Visual clues: rounded, chipped, or missing teeth

• One spur gear

• Disconnect power; turn off water supply before service
• Access the drive assembly and note gear orientation and any shims/washers during disassembly
• Inspect mating gears, bushings, and bearings; replace any worn components to prevent rapid re-failure
• Apply manufacturer-specified grease if required and tighten fasteners per service information

The Drawer Glide Gear is an OEM part for Whirlpool refrigerators. This part ensures the smooth operation of refrigerator drawers, allowing them to slide in and out with ease. This gear mechanism is vital for the user-friendly access to stored food items, contributing to the efficient organization and optimization of space within the refrigerator.

Causes for replacement include physical damage such as cracks or breakage, wear that impedes smooth operation, or a malfunction that prevents drawers from opening or closing properly.

Symptoms of a bad Drawer Glide Gear include:

• Difficulty in sliding the refrigerator drawers
• Uneven movement or jamming of the drawer
• Noise when opening or closing the drawer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This crisper drawer front replaces the damaged face of your refrigerator's produce bin, restoring a solid handhold and proper drawer fit. Install it to keep contents contained and help the drawer open, close, and align smoothly. What it does:

• Attaches to the front of the crisper pan and serves as the handhold for opening and closing
• Retains items inside the bin to prevent spills into the compartment
• Helps the drawer sit squarely and slide correctly in its tracks
• Common symptoms: cracked or missing front, loose/broken tabs, drawer hard to open/close, or popping off rails

• 1 crisper drawer front

• Disconnect power to the refrigerator before servicing
• Remove the crisper drawer and place it on a padded, flat surface
• Release the locking tabs/clips to remove the old front; avoid over-flexing the drawer box
• Align the new front and press until all tabs fully engage, then reinstall the drawer

The Door Bin is an OEM part for Whirlpool side-by-side refrigerators. Located internally on the refrigerator door, it provides convenient storage for taller items like bottles and cartons.

Symptoms of a faulty door bin include:

• Cracked or broken plastic that causes items to fall out 
• Detached or loose mounting brackets unable to securely hold the bin
• Warped or collapsed bin walls reducing usable capacity

Causes can be normal wear and impact damage over time from loading/unloading. Temperature fluctuations may also cause brittle plastic to crack or warp.

This OEM replacement is compatible with additional Whirlpool, Maytag, and some Kenmore side-by-side models.

This pan front is the removable front panel for a refrigerator storage drawer. Replacing a cracked or missing front restores containment and gives a solid handhold so the drawer opens and closes smoothly.

• Forms the drawer's front wall and integrated pull
• Helps keep food from sliding out of the bin
• Common fix for cracked, broken, or missing drawer fronts
• Improve drawer alignment and closing after damage

• Safety first: Disconnect power before working inside the refrigerator
• Remove the drawer and place it on a flat surface
• Release retaining tabs or screws to remove the old front
• Align and snap/secure the new front; verify smooth operation before reinstalling

This refrigerator crisper pan is the sliding produce bin in the fresh food section. Replace a cracked or missing bin to restore smooth operation, contain spills, and keep fruits and vegetables organized.

• Stores fruits and vegetables in the fresh food compartment
• Slides along the shelf rails for easy opening and closing
• Helps contain small leaks to protect surrounding shelves and liners
• Replaces a cracked, chipped, warped, or missing drawer that sticks or falls off track

• Disconnect power to the refrigerator before servicing
• Remove contents and the shelf/cover above the drawer if needed
• Slide the old pan straight out; align the new pan with the tracks and push in until fully seated
• Confirm smooth travel before reloading items