Lawn Mower Blade

46-inch mulching blade for riding mowers and lawn tractors. Replaces worn, bent, or damaged blades. Finely cuts grass clippings for decomposition.

This mulching blade is a 3-in-1 blade. It can cut, discharge, and bag grass clippings. This versatility is due to its curved surface design, which promotes an increased cutting edge. When this mulching blade is in action, the grass clippings will be transferred to the deck and cut once more. Once it falls back to the ground, the clippings are smaller. Smaller clipperings are suitable for mulching because they decompose faster. A mulching blade is made from sturdy metal, but prolonged use can make its edges dull. A dull mulching blade will result in undesirable fraying and tearing cuts. A mulching blade replacement takes 30 minutes or more. Start by disconnecting the spark plug and turn the machine on its side. Then, remove the old blade. Insert the replacement into the blade spindle and use a ratchet for a secure fit. This original Husqvarna mulching blade replacement is a perfect choice. It is made explicitly for lawnmowers from Husqvarna, Murray, Craftsman, Weed Eater, Ariens, Ryobi, and Poulan. It measures 22 and comes in solid metal construction. It is sold individually.

Blade adapter that attaches the mower blade to the drive assembly. Replace if cracked, stripped, or no longer securely holding the blade in place.

This is a genuine replacement blade for select mulching riding lawn mowers. The mower/mulch blade includes a center hole for attaching to the mandrel assembly with a bolt or nut. When secured and properly sharpened, the blade will cut the grass into fine clippings that can be left behind for mulching. Over time, this blade is subjected to regular use, repetitive motion, and potential ground contact. Other damage can also occur, such as if the mower hits a stump or a rock. In the event that the blade is warped, damaged, or dull, it needs to be replaced immediately. This genuine OEM mulching mower blade is designed for use with compatible riding lawn mowers from Poulan, Jonsered, and Husqvarna. There are more than 90 models that take this blade. This durable blade is made from high-quality metal and sold as a single unit. Hardware is not included with this purchase and will have to be purchased separately if it is required. The blade can be replaced with a wrench. Be sure to disconnect the spark plug and/or battery for safety before working on the blade or other moving parts.

This replacement part is a blade adapter. This part is used to change or adjust the blades on a lawn mower to work at the desired settings according to the user.Damage a blade adapter can include being dented, bent, cracked, or chipped. If the blade is no longer able to attach to the adapter, it might be time to replace this part. Always wear work gloves when working near blades as they can be very sharp. Be sure the engine is powered off during this repair to prevent injuries. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

Replace your worn, dull, or damaged 22-inch high lift mower blade. Essential for maintaining cutting performance and reducing engine stress.

Rotating cutting blade that attaches to the lower mower deck. Replace when blade edge is cracked, bent, excessively worn, or missing for clean cuts.

Replace your worn or damaged 26-inch mower blade. This cutting blade installs under the deck and may need replacement if bent, chipped, or dull.

Replace your riding mower's 21-inch cutting blade when damaged, bent, or dull. This blade installs under the mower deck for precise cutting performance.

This is a four-in-one blade that is used for push mowers from several manufacturers. It is used for shredding and mulching leaves. This provides users with more options when cutting the grass on their lawns. If the blade is not working properly, it will limit the functionality of the mower.The metal blade on a mower is durable and meant to last. However, accidents such as running over stumps or rocks could cause the blade to bend or break. Older blades could become worn down and chipped. In some cases, the metal may even begin to corrode. Regardless of what causes the damage, owners need to change the blade out when it no longer works correctly. When replacing the part, users should wear work gloves to protect their hands. This blade works for certain models of push mowers from Husqvarna and Jonsered. It is sold individually and is a genuine OEM replacement blade sourced from the manufacturer.

Replacement cutting blade for riding mowers and lawn tractors. Installs under the deck to cut grass. Replace if blade is bent, cracked, or worn.

Note: This is ONE blade.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

Replacement blade for gas walk-behind mowers. Installs under the mowing deck to cut grass. Replace if blade is bent, cracked, or dulled beyond sharpening.

This high lift blade is a type of lawnmower blade. Compared to other blades for mowers, its ends have deeper curves. This unique and distinct feature makes the blade more versatile. When you cut the grass, the deeper curved edges will eject the clippings to the bagger. A high lift blade features large wind wings that contribute to airflow. When there is an increase in air circulation, this means you can prevent grass from clogging and accumulating, especially when cutting wet and tall grass. Continuously using a high lift blade will dull its edges, which lowers its cutting efficiency. A broken or dull blade can result in unevenly cut grass. When this happens, a replacement blade should always be within reach. For a worry-free installation, be sure to have a wooden block and socket wrench. This original Husqvarna blade works with mower models from Ariens, Dixon, Craftsman, and Husqvarna. It will also work with other mowers with 46 decks. This brand-new high lift blade is sold-individually. Bolts and washers are sold separately.

This is a lift bagging blade for riding lawnmowers or tractors. Made to ensure that grass clippings make their way into attaching bagging units, they will wear down easily over time. The constant friction against the cutting edge also guarantees that a replacement will be necessary over the lifetime of the machine. Made of durable metal, the lift bagging blade installs relatively easily, but methods and tools required are going to vary based on the type of machine in use. Typically a socket set and file will be necessary for replacement. It is essential to follow the owner's manual when changing this blade and to ensure that the proper hardware is used, and to replace bolts or other components if they show signs of wear or failure. This OEM part fits 54 deck lawn tractors within the following brands: Husqvarna, Poulan, Roper, Sears/Craftsman, and Weed Eater, and others. This ships as an individual unit.