Need Help?
Call
This part is a replacement blower chute. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a detached or broken chute in a variety of blower models. The blower chute is what allows snow to be expelled from the snow blower. The chute may become worn, cracked, or damaged over time, as it is subject to significant wear and tear. If this occurs, it should be replaced as soon as possible to ensure the blower functions properly. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part. For more accurate information on how and where to install this blower chute, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this blower chute is suitable for use on several different models of snow blowers manufactured by MTD, Craftsman, Yard Machines, Yard Man, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.
Usually ships within 4 - 14 days
Plastic Shield Kit Assembly / Blade Guard
Many gas-powered small engines require the use of a pull cord to get the engine going. Rather than a starter, it is the pull of the cord that causes the engine to turn over and combustion to begin inside of the engine. These pull mechanisms often use a damper spring on the starter assembly. It exists to "pre-load" a recoil or pull starter with a lot of tension. When it malfunctions, it will take a tremendous amount of effort to get the engine going. This replacement damper spring is designed for a long list of Shindaiwa and Echo machines. These include trimmers, blowers, edgers, and more. This OEM replacement part is shipped individually and made of durable metal for years of service.
This fuel gasket provides a seal for the gas cap. It prevents any leakage of gas into other chambers of the machine.It is very normal for a fuel gasket to undergo regular wear and tear over time and with exposure to the elements. When it comes time to be repaired or replaced, the fuel gasket will appear brittle or compressed. To replace a fuel gasket, the user simply has to remove the old one and insert the new fuel gasket inside of the machine's fuel cap. This fuel gasket is made out of composite material.This fuel gasket is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. A fuel gasket is essential in the proper operating of many outdoor lawn and garden machines, including but not limited to trimmers, brush cutters, engine sprayers, power brooms, leaf blowers and vacuums, hedge trimmers, and string trimmers. It designed for use to be compatible with products manufactured by the Shindaiwa and Echo brands.
This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.
The genuine replacement air filter is made of foam and catches dust and debris from the air as it enters the engine on select lawn and garden equipment. Over time, filters will become clogged with regular use, which makes replacing them a part of routine maintenance on most engines. The air filter may also become clogged intermittently or due to excessive dust buildup between maintenance schedules, so it may be helpful to keep an extra filter on hand for emergency replacements. These filters cannot be cleaned and must be replaced when they become clogged. This genuine OEM filter is manufactured to exact standards by Husqvarna and is designed for use with hundreds of machines from Jonsered and Husqvarna, including blowers, trimmers, edgers, hedge trimmers, and saws. Replacing the air filter does not require any tools. Allow the engine to cool and simply remove the filter cover, take out the old filter, and replace the new filter. Then replace the cover. Always wear gloves when performing engine work. This filter is sold as a single unit and does not include the air filter cover or base assembly.
The replacement primer pump seen here can be used with a range of different types of lawn and garden equipment. The pump is also known as a primer bulb or a primer button. The pump is a rubber bulb that is used to create a vacuum to bring fuel from the tank, through the lines, and into the carburetor to prime the engine. When the engine is primed, there will be enough fuel in the carb to help ensure a fast start. The primer pump can wear out over time and become cracked or develope holes in it. This would nullify its effectiveness as a vacuum to draw in fuel. If there is an issue with the pump, it should be repaired right away. Replacing the pump is simple and requires only a couple of tools. This authentic OEM replacement primer pump can be used with hedge trimmers, string trimmers, and leaf blowers. It is compatible with several models from Husqvarna and Jonsered. Buyers should consult their manual and model diagrams to ensure they are choosing the correct part for their make and model.
This carburetor diaphragm is a genuine Husqvarna part, sold individually. This carburetor diaphragm can be used as a replacement part for a string trimmer, leaf blower, chainsaw, brush cutter, or leaf vacuum. The purpose of a carburetor diaphragm in one of these outdoor appliances is to combine air and fuel as part of the ignition process. The diaphragm controls the input of air and fuel throw a mechanism that pushes against a valve to open and shut, allowing the air and fuel in. The carburetor diaphragm might have to be replaced if the intake of fuel and air can no longer be controlled or the system is dysregulated. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This carburetor diaphragm is compatible with the following outdoor appliance brands: Husqvarna and Jonsered.
Flat washer for trimmers, blowers, and hedge trimmers. Replaces worn, missing, or damaged washers. Essential hardware for secure assembly and fit.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.