Need Help?
Call or text
Seals the cylinder head to the engine block, preventing compression and oil leaks. Replace if you notice oil seepage, overheating, or loss of power.
Usually ships within 4 - 14 days
Metal connecting rod assembly that links the crankshaft to the piston in small engines. Replace if rod is bent, cracked, or damaged from wear or impact.
It's best to have spare O-ring gaskets on hand to rebuild a carburetor when the need arises. Use this manufacturer-approved replacement part to complete the process. When outdoor power equipment shuts off just after starting or won't start altogether, there may be a problem with the carburetor. It could be a leak that causes compression problems keeping the machine's engine from starting. Gasoline may drip from the float bowl because of an O-ring that won't seal or seat evenly all around, or one that has become brittle over time. This is a genuine OEM part compatible with specific lawnmowers, snowblowers, wood chippers, log splitters, tillers, and other garden maintenance machines from Craftsman, MTD, Cub Cadet, MasterCut, Troy-Bilt, and Yard Machines. It is sold individually.
Starter rope won't retract after pulling? This recoil pulley and spring assembly fixes rope retraction issues on mowers and small engines. Direct fit.
This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.
Oil dipstick assembly for lawn and garden engines. Installs in the oil fill tube to measure current oil level. Replace if cracked, broken, or missing.
Fuel cap for gas-powered engines and outdoor power equipment. Seals fuel tank to prevent debris, dirt, and air contamination. Replace if cracked or loose.
This is a recoil starter assembly for lawn and garden power equipment. When the recoil starter rope is pulled, this causes the spark which starts the engine.A new recoil starter assembly will be needed if the recoil or pulley system has broken. The rope may become broken or frayed and the plastic on the pulley could crack. If the rope becomes loose and there is no tension when it is pulled, then a new recoil starter assembly will be needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on engines, lawnmowers, lawn tractors, and log splitters that are manufactured by MTD, Yard-Man, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.
This genuine Echo flywheel can be used as a replacement part for string trimmers, edgers, hedge trimmers, leaf blowers, leaf vacuums, and pole saws. The purpose of the flywheel in the small engine of such outdoor appliances is to save up the momentum generated by the combustion of the engine's fuel to maintain the rotation of the crankshaft while the engine is not actively using the fuel.A flywheel might have to be replaced in the lifespan of an outdoor appliance if it exhibits symptoms of malfunction such as frequently slipping gears, a burning smell, occasional unexplained kickback, and rattling noises coming from the brake clutch. If the flywheel exhibits any of these symptoms that are directly attributable to a malfunctioning flywheel upon inspection, the flywheel should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This flywheel is compatible with the following brands: Echo and Shindaiwa.
This part is a replacement air box cover. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective air box cover in backpack blowers.This cover protects the air box to prevent debris or contaminants from getting inside and negatively affecting the equipment. This part can become cracked or damaged over time and thus should be replaced. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this air box cover, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality plastic. This air box cover can be used with backpack blowers that have been manufactured by MTD, Craftsman, and other brands. Sold individually.
This part is a replacement blower chute. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a detached or broken chute in a variety of blower models. The blower chute is what allows snow to be expelled from the snow blower. The chute may become worn, cracked, or damaged over time, as it is subject to significant wear and tear. If this occurs, it should be replaced as soon as possible to ensure the blower functions properly. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part. For more accurate information on how and where to install this blower chute, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this blower chute is suitable for use on several different models of snow blowers manufactured by MTD, Craftsman, Yard Machines, Yard Man, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.
Plastic Shield Kit Assembly / Blade Guard
Many gas-powered small engines require the use of a pull cord to get the engine going. Rather than a starter, it is the pull of the cord that causes the engine to turn over and combustion to begin inside of the engine. These pull mechanisms often use a damper spring on the starter assembly. It exists to "pre-load" a recoil or pull starter with a lot of tension. When it malfunctions, it will take a tremendous amount of effort to get the engine going. This replacement damper spring is designed for a long list of Shindaiwa and Echo machines. These include trimmers, blowers, edgers, and more. This OEM replacement part is shipped individually and made of durable metal for years of service.
This fuel gasket provides a seal for the gas cap. It prevents any leakage of gas into other chambers of the machine.It is very normal for a fuel gasket to undergo regular wear and tear over time and with exposure to the elements. When it comes time to be repaired or replaced, the fuel gasket will appear brittle or compressed. To replace a fuel gasket, the user simply has to remove the old one and insert the new fuel gasket inside of the machine's fuel cap. This fuel gasket is made out of composite material.This fuel gasket is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. A fuel gasket is essential in the proper operating of many outdoor lawn and garden machines, including but not limited to trimmers, brush cutters, engine sprayers, power brooms, leaf blowers and vacuums, hedge trimmers, and string trimmers. It designed for use to be compatible with products manufactured by the Shindaiwa and Echo brands.