Need Help?
Call or text
The Freezer Door Gasket is an OEM part for LG side-by-side and bottom-freezer refrigerators. This gasket forms an important insulating seal around the freezer door compartment, preventing warm air from entering the sealed interior. Maintaining proper freezing temperatures depends on an intact door gasket.
Causes of a bad freezer door gasket can include cracks, deterioration, or compression from repeated opening and closing of the freezer door over time. Food debris trapped against the gasket rim can also damage sealing integrity.
Symptoms of a bad freezer gasket include:
This replacement freezer door gasket from LG is also compatible with some Kenmore-brand refrigerators.
Five minute job. Read more
The Hinge Bushing is an OEM part for LG refrigerators. It serves as a crucial component in the door hinge mechanism, ensuring smooth and stable operation when opening and closing the refrigerator door.
You should replace this hinge bushing if it becomes worn out or damaged. Common causes of a bad hinge bushing include constant use leading to wear and tear, misalignment of the door, or physical damage due to impact.
Symptoms of a bad hinge bushing include:
This OEM LG part is also compatible with Sears/Kenmore.
Elderly neighbor charged $100 for factory tech to inform her that the part wasn't available anymore, so I ordered 2 from Appliance Parts Pros.com (one for a spare) and when they arrived a few days later, I installed then in about 20-25 minutes. I had to remove all the food off the door shelf so I could lift the door off the hinge to replace the bushing. That took 5 minutes. Shame on the tech that went by the date of manufacture rather than checks by model and serial number to see if the part... Read more
The French Door Mullion is an OEM part for LG refrigerators. It is a flap located between the two doors of a French door refrigerator, helping to seal the gap and maintain the internal temperature by preventing warm air from entering when the doors are closed. This component is crucial for energy efficiency and proper functioning of the refrigerator.
Over time, the mullion can wear out or become damaged due to frequent use, impact from door closures, or issues with the hinge mechanism. Causes of a bad French door mullion include wear and tear, physical damage, or a faulty hinge that causes misalignment.
Symptoms of a bad French door mullion include:
This OEM LG part is also compatible with Sears/Kenmore models.
Replacement Read more
The Water Supply Line is an OEM part for LG refrigerators. It is responsible for delivering water from the household supply to the refrigerator's water dispenser and ice maker. This line ensures a consistent flow of water, crucial for producing ice and dispensing chilled water.
Over time, water supply lines can wear out or become damaged due to factors such as mineral buildup, kinks, or punctures. These issues can lead to leaks or reduced water flow, affecting the refrigerator's functionality.
Symptoms of a bad Water Supply Line include:
First, water and electricity don't mix, so make sure to unplug your refrigerator before beginning this repair - it shouldn't take more than an hour, so you shouldn't have to worry about spoilage. My water dispenser began making a hissing sound from the back of the fridge when you pressed the dispenser. Upon inspection, I discovered the 1/4" feed line into the filter housing assembly had cracked. I ordered the 1/4" feed and 5/16" return lines, figuring to replace the return line while I was back... Read more
The Water Line is an OEM part for LG refrigerators. It is designed to transport water from the home’s supply to the refrigerator, enabling the production of ice and the dispensing of fresh water. This tubing is essential for the refrigerator's water and ice features to function correctly, ensuring clean, clear water is available at all times.
Symptoms of a bad Water Line include:
Causes of a bad water line can include physical damage such as cracks or punctures, blockages from mineral buildup inside the line, or deterioration due to aging or environmental factors such as heat or pressure.
This OEM LG part is also compatible with Sears/Kenmore, ensuring broad compatibility across multiple refrigerator models.
The Water Inlet Valve is an OEM part for LG refrigerators. It controls the flow of water into the refrigerator for the ice maker and water dispenser, ensuring a steady and controlled supply of water.
You should replace the water inlet valve if it becomes clogged, damaged, or fails to function properly. Causes of a bad water inlet valve can include mineral buildup from hard water, electrical malfunctions, or general wear and tear over time.
Symptoms of a bad water inlet valve include:
This OEM LG part is also compatible with Sears/Kenmore refrigerators.
Replaced icemaker Read more
The Crisper Cover is an OEM part for LG refrigerators. This cover fits over the crisper drawers, providing a flat surface for additional storage and helping to maintain optimal humidity levels for the fruits and vegetables stored in the drawers below. The cover measures approximately 29 x 19 inches.
Causes of a bad crisper cover can include cracks or breakage from heavy items being placed on top of it, general wear and tear from frequent use, or damage due to impacts during cleaning or handling.
Symptoms of a bad crisper cover include:
Replaced it with a new one that fit perfectly from AppliancepartsPros,com Read more
The Tray Asm is an OEM part for LG refrigerators. It is designed to store fruits and vegetables at optimal humidity levels, helping to keep produce fresh for longer periods. It has approximate measurements of 30 inches in length, 18 inches in width, and 4 inches in height.
Causes of a bad tray asm can include cracking or breaking due to frequent use, accidental dropping, or exposure to heavy loads that exceed its capacity. Over time, the plastic can also become brittle and more susceptible to damage.
Symptoms of a bad tray asm include:
Ordered replacement drawer, new drawer was an exact replacement even though the part number had been changed. Read more
The Defrost Sensor Assembly is an OEM part for LG refrigerators. This integral component plays a key role in monitoring the temperature within the refrigerator's freezer section, particularly during the defrost cycle. It ensures that the defrost system activates and deactivates at appropriate temperatures to maintain efficient operation and prevent frost buildup.
Symptoms of a faulty defrost sensor assembly include:
Causes of defrost sensor failure often involve damage from moisture or ice, electrical faults, or degradation over time, which can lead to inaccurate temperature readings and improper defrost cycle regulation.
Replaced defrost sensor in freezer compartment, if you are handy this is a do it yourself job. The cover in the freezer section just pops out not tools needed. You will need a few small zip ties and some cutters to remove the old zip ties. Take a picture were the old sensor was before removing and reinstall in the same place. I used a meter to check continuity of the defrost element and found the element to be ok. I was quoted $85 to have someone come to the house just to check the unit and... Read more
The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators, designed to support and pivot the refrigerator door, allowing it to open and close smoothly. This hinge is a critical component for the proper alignment and function of the door, ensuring an airtight seal when closed to maintain the internal temperature and efficiency of the refrigerator.
Causes of damage to the lower refrigerator door hinge often include normal wear and tear, excessive force when opening or closing the door, or corrosion due to moisture and cleaning agents.
Symptoms of a bad Lower Refrigerator Door Hinge include:
This OEM LG part is also compatible with some Kenmore models.
Watched video, ordered part, fixed successfully, easily, and quickly. Read more
The Thermistor Assembly is an OEM part for LG refrigerators. It serves a crucial function in monitoring and regulating the temperature within the appliance. By sensing temperature changes, the thermistor sends information to the refrigerator’s control board, ensuring the system adjusts cooling to maintain the desired temperature settings.
Symptoms of a failing thermistor assembly include:
Causes of thermistor assembly failure typically involve electrical faults, damage from moisture or frost, or simple wear over time, which can impact its ability to accurately measure and report temperatures.
Replace thermistor. Explained to home owner either thermistor or compressor since it was running hot but only 10 minutes to change out. Luckily client still has warranty on fridge to replace old compressor and thermistor. Read more
The Air Cleaner Filter Assembly is an OEM part for LG refrigerators. This part ensures the air within the appliance remains fresh and free of contaminants. This part minimizes odors and filtering out particulates, thereby maintaining the quality of the air circulating through the refrigerator and its contents.
Over time, the effectiveness of the air cleaner filter can diminish due to the accumulation of particles and odors it has trapped. A decrease in air quality within the refrigerator, persistent odors despite cleaning, and an increase in the spoilage rate of food items can all be signs that the filter assembly may need replacement.
Symptoms of a bad Air Cleaner Filter Assembly include:
Just wanted to say how incredibly nice and helpful the gentleman was that helped me on the phone when I called to place the order. Very nice..... Read more
This right-side Freezer Basket Support Rail is an OEM part for LG refrigerators. Located inside the freezer compartment, it provides elevated storage shelves for ice cream, frozen vegetables, meats, and more above the freezer floor.
Causes of a bad support rail can include damages such as cracks or breaks that compromise its load-bearing ability over years of use. Sharp freezer temperatures cause constant contraction and expansion.
Symptoms of a bad support rail include:
This OEM LG part can also be used on Kenmore/Sears appliances.
Ordered the plastic glides that connect to the metal rails. Super easy fix! Read more
This assembly stores ice and delivers it from the ice maker to the dispenser. Replace it when the bin is cracked, warped, or its drive components are damaged, causing weak dispensing, jams, or being stuck on one ice type.
After doing research on broken ice bucket for an LG refrigerator on numerous sites I became totally confused on all the different #s that showed up. Contacted AppliancePartsPros. I was assured they had the part needed. Part arrived perfect match. Took more time removing part from shipping box than installing. Part I ordered is mostly plastic so all the bubble wrap made sure it wasn't broken in transient. If I need to order more parts this is the go to site. Larry Read more
The Front Panel Display Assembly is an OEM part for LG refrigerators. This assembly includes the control panel and display, allowing users to interact with and monitor the refrigerator's functions, such as temperature settings, ice and water dispensing, and other features. It provides a convenient interface for adjusting and controlling the refrigerator's operations.
Causes of a bad front panel display assembly can include electrical malfunctions, physical damage from impacts or mishandling, or wear and tear over time. A malfunctioning display assembly can affect the overall usability and functionality of the refrigerator.
Symptoms of a bad front panel display assembly include:
Ordered the entire control panel. Took only 30 minutes to replace. Once I received the new part, it was obvious how easy it would be to replace. A thin putty knife and a little care not to damage the surrounding surface was all that was needed. Read more
The Water Tank Assembly is an OEM part for LG refrigerators. It stores and supplies water for the refrigerator's dispenser and ice maker, ensuring a steady and clean water flow for these features.
Causes of a bad water tank assembly can include mineral buildup from hard water, leaks due to cracks or punctures, or contamination from mold or bacteria if the tank is not regularly cleaned. Over time, wear and tear from repeated use can also lead to failure.
Symptoms of a bad water tank assembly include:
Replaced tank assembly. Actually I think the supply hose was originally not fully seated in the tank and I think I could have re-seated it deeper through the gray bushing. When I set the line into the new tank, still leaking. Pulled out supply line and reset using a little more force and line went into the tank. Took the bushing clip off the other tank and used it for the supply line bushing. So far, no leaks. The thing to remember is to push the edges of each hose bushing inward to pull... Read more