Lg Tray & Related

The Turntable Support is an OEM replacement part for LG microwaves. It fits under the cooking tray and is used to support the tray and to engage the rotating coupler. If your cooking tray will not turn or rumbles when it turns, check the support assembly for signs of wear or damage. If no damage can be seen, check the coupler for damage.

Causes of a bad turntable support include normal wear over extended use. Improper cleaning methods could potentially damage delicate support components.

Symptoms of a bad turntable support include:

• Wobbly or unstable turntable rotation
• Squeaking or grinding noises coming from below the turntable
• The inability of the turntable to rotate dishes consistently

This OEM LG part is also compatible with some Sears/Kenmore models.

This is the glass turntable tray that sits inside your microwave. It provides a stable, heat-resistant surface and rotates with the drive to help cook food evenly. Replace cracked or missing trays to restore safe, consistent heating.

• Supports dishes and rotates with the drive coupler to distribute heat more evenly
• Provides a flat, microwave-safe surface for plates and bowls
• Replacing a damaged tray can address wobbling, poor rotation, or uneven cooking
• Helps contain spills and makes cleanup easier

• Disconnect power before servicing
• Ensure the roller ring is properly seated; align the tray's center with the drive coupler and set it flat
• Turn the tray by hand to verify smooth rotation, then test with a microwave-safe cup of water

This turntable shaft (MH-8) connects the microwave's turntable motor to the glass tray hub so the tray spins for even heating. Replace it when the tray won't rotate, slips intermittently, or makes grinding/clicking noises.

• Couples the turntable motor to the tray hub to drive rotation
• Helps ensure even cooking and defrosting by keeping the tray moving
• Typical symptoms: tray not turning, intermittent/jerky rotation, grinding or clicking from the cavity floor
• Damage indicators: cracks, melted/rounded drive surfaces, or excessive wobble

• Disconnect power to the microwave at the plug or breaker before servicing
• Remove the glass tray and roller ring to access the shaft
• Lift the old shaft straight up; if stuck, access the turntable motor from below to push it out
• Align and press the new shaft fully onto the motor spindle; reassemble and test rotation

This is the glass turntable tray for a microwave. It provides a stable, food-safe surface and rotates with the turntable system to help heat food evenly.

• Holds dishes securely while the microwave runs and rotates for uniform heating
• Replaces a cracked, chipped, or missing glass plate
• Common symptoms: tray wobbles, won't rotate properly, uneven heating, or visible damage to the plate
• Designed to fit the microwave's turntable coupler and support for smooth operation

• Unplug the microwave (or open the door to stop operation) and let the tray cool before handling
• Remove the old tray; align the new tray's center with the turntable coupler
• Ensure it sits flat and spins freely by hand before use
• Do not overtighten or force—tray should rest on the support/rollers

Rotating ring assembly supports the drum's rotating interface to maintain smooth, stable rotation. Replacing a worn or damaged ring reduces noise, vibration and scraping for quieter, more reliable operation. What it does:

• Holds and aligns the drum's rotating surface so the drum spins smoothly and evenly.
• Prevents metal-on-metal contact between the drum and cabinet or shaft.
• Worn or damaged rings can cause rubbing, grinding, squealing or excessive vibration.
• Restoring the ring can improve drum tracking and reduce noise during spin cycles.

• Disconnect power (and gas if applicable) before beginning any repair.
• Support the drum during removal to prevent it from shifting; follow the model's service diagram for correct disassembly.
• Inspect neighboring parts (rear drum bearing, glides, seals) for wear and replace as needed.

This turntable assembly restores smooth rotation inside your microwave so food heats more evenly. Replace a cracked tray or worn support to eliminate wobble and scraping noises while maintaining a stable, level surface for dishes.

• Supports and rotates cookware with the drive coupler during cooking
• Promotes even heating by keeping food moving through the microwave energy
• Stabilizes the tray to reduce spills, wobble, and noise
• Replaces broken, chipped, or missing glass tray and support ring

• Disconnect power and allow the microwave to cool before servicing; handle glass carefully
• Remove old tray and ring; clean the cavity floor and turntable track
• Position the roller ring on the track; align the tray with the center coupler until it seats flat
• Test with a cup of water to ensure smooth, quiet rotation

This is a shelf, or warming rack, intended for use with microwaves. This shelf allows a place to set the items being warmed. With regular use, the shelf may get damaged. The shelf could also get misplaced. If there is a missing or broken shelf, the part should be replaced with a genuine OEM replacement part to continue the efficient performance of the appliance.Visual inspection of the shelf inside the microwave will quickly determine if the part is missing or broken. Replacing a damaged or misplaced shelf is a quick and straightforward process. Remove the old shelf and slide the new shelf into the proper position. Continue regular use of the appliance. Make sure that the metal shelf is not touching any part of the appliance on the inside, including the sides, top, or bottom.This shelf is an authentic OEM replacement part. It is made of high-quality, durable materials. The shelf is sourced directly from the manufacturer. This shelf for microwaves is compatible with several different models of appliances. It can be installed in many brands of microwaves, including devices produced by Kenmore, LG, Amana, and General Electric.

This drive shaft transfers motor torque to the appliance drum or tub, restoring proper rotation and reducing wobble. A direct-fit replacement designed to return smooth, quiet operation when the original shaft is worn or damaged. What it does

• Connects the motor/transmission to the drum or tub so the drum can spin.
• Restores correct alignment and rotation to reduce wobbling or scraping.
• Helps stop symptoms like noisy operation, grinding, or a drum that won't turn.
• Works as the mechanical link in drive assemblies where a worn shaft prevents normal function.

• Disconnect power and water supply, and drain the appliance before beginning service.
• Access may require removing the cabinet, front panel, or tub—follow the service manual for your model.
• Use appropriate tools and follow OEM instructions for safe removal and reassembly.