Maytag Cooktop Burner & Related Parts

Kit contains 4 burner caps

This natural-gas burner orifice spud meters the correct fuel flow for a 15,000-BTU surface burner. Replacing a clogged, damaged, or wrong-size orifice restores proper flame size, cleaner combustion, and reliable cooktop performance. What it does:

• Meters gas through a calibrated opening to the burner head for correct flame height
• Sized for a 15,000-BTU surface burner using natural gas
• Installs in the orifice holder/valve body beneath the burner
• Typical symptoms of a faulty or mismatched orifice: weak/small flames, yellow/sooty flames, uneven heating, delayed ignition, burner won't reach high heat

• 1 natural-gas 15,000-BTU orifice spud

• Shut off gas supply and disconnect power; allow all burners to cool completely
• Remove grates, caps, and burner heads; lift the top or access the orifice holder as required
• Match each orifice to the correct burner location by BTU rating; do not overtighten
• After reassembly, check all connections for leaks with a non-corrosive soap solution and verify proper flame color/size

• For natural gas applications only; use the correct LP/propane orifice when converting fuel types

Color: black. Small size. Measures about 2-1/2 inches in diameter.

Burner cap set for gas range cooktops. Fits over surface burners to distribute heat evenly. Replace cracked, chipped, or missing burner caps.

Burner orifice spud for gas ranges. Meters gas flow to control flame height. Replace if clogged, damaged, or when converting between natural gas and LP.

LP broil burner orifice for gas ranges. Installs inside oven cavity at top. Replace if damaged, incorrect size, or missing to restore proper propane flow.

Replacement oven bake burner for gas ranges with direct spark ignition. Distributes gas evenly under the oven floor. Replace if cracked, corroded, or damaged.

Burner head that distributes gas evenly across the burner. Replace if cracked, clogged, or corroded to restore proper flame distribution on your gas cooktop.

This kit includes the orifice spuds and components needed to convert a natural gas range to liquid propane (LP) operation. The orifices regulate the gas flow to the surface burners for proper flame size and safe combustion. This kit is required when switching fuel types - without the correct orifices, burners may produce irregular flames, soot, or fail to ignite properly.

Converts your gas range from natural gas to liquid propane (LP). Includes orifices needed for safe operation on propane fuel. Required when switching fuel types.

Burner head for gas range cooktop. Installs beneath cooking surface to distribute flame evenly. Replace if cracked, clogged, or damaged from wear.

6,000 BTU. Color: Coal matte black. Measures about 2 inches in diameter.

Burner head sits on the base and distributes gas through precision ports for even flame. Replace if cracked, clogged, or corroded for proper ignition.

This LP conversion kit includes a set of surface burner orifice spuds designed to convert your range from natural gas to liquid propane operation. The orifices regulate the flow of LP gas to each surface burner, ensuring a proper flame size and safe combustion. You need this kit when switching your gas range to propane fuel, such as when moving to a location without a natural gas supply.

This is the base component of a surface burner on a gas or electric range cooktop. It sits on the cooktop and distributes heat evenly for cooking. Replace this burner base if you notice uneven flame patterns, visible damage or warping, or if the burner cap no longer seats properly.

Replace your gas cooktop burner head if it's clogged, scorched, or worn. This part distributes gas through precision ports for even flame distribution.