Maytag Cooktop Control Board

• Won't start

I purchased a new igniter for the bake assembly and found that it, unfortunately, did not resolve my problem. I measured the resistance of the different points on the gas valve and it was reading within spec so I then purchased this spark module and it did the trick. My gas range is a Kitchenaid kgsk901sss02. I had a LOT of trouble finding where the spark module is located, and eventually found a schematic that shows it's location behind the front control panel of the oven. Upon taking the... Read more

Ordered the electronic control board turns out that was not my problem called Appliance Parts for technical assistance and they suggested I order the Panel Control. Fixed my JennAir within thirty minutes. Packed up first parts a instructed by my return authorization, received credit for returned part. Wonderful experience with all at Appliance Parts. Read more

Replaced numerous items including this Inverter and two control boards but the Magnetron was the ultimate solution. The tip was clearly burned through when I removed the original. Read more

Bought replacement relay board, replaced it. Would not work, turned stove circuit breaker off then on again. Display panel showed stove was resetting waited for reset, tested the bake option twice to ascertain it was working correctly. It worked! Our grateful appreciation to the customer service rep who helped us with our questions and the shipping. Wish we had gotten her name. Read more

• Will not program

Appliance Parts Pros was amazing to work with in getting the right part for our 15 year old JennAir Double Oven. I ordered the part around 4 pm on Wednesday, and it was here to my house the next day! We installed it this weekend, and it works perfectly. Such an easy repair; we popped out the old component, installed the new one, attached the three electronic connections, flipped the breaker back on, and voila....it worked. Thanks Appliance Parts Pros for your great service and fast delivery... Read more

Replaced with part No.AP4417276 electronic control board that we ordered from you and replaced it ourselves with your professional assistance. This has been an excellent experience with your company, and your return policy. Thank you . Read more

Oven is a slide in. I pulled it out just a Few inches and removed 8 screws and Pulled the face down to expose the unit. The control unit had 4 screws and 4 Plugins. It only took me less than 10 Minutes to replace unit and slide back In place. Read more

Replaced ignitor. Watch the u-tube videos for removing and replacing the board and ignitor. Read more

My 15 year old son and I examined the new parts and made a plan for how we were going to take the front off of the oven. Turns out it was fairly simple. We removed the knobs, the knob shrouds, two philip screws on the side of the head and about 6, 6mm hex sheet screws. Voila! It came apart. We carefully looked at how the old parts were assembled and simply reversed the assembly with the new parts. Since one of our parts was the entire front head, it went together quickly and it was a perfect... Read more

Replaced damaged part Read more

The part I ordered was easy to replace and it fixed the problem! Read more

Removed the screws that hold the oven and microwave in the cabinet and slid the whole unit out 4 inches, and removed 2 screws on each side of the oven that hold the screen in. The entire front panel can then be removed. Used a very small flat screwdriver to unplug the plugs off the control board so the clips wouldnt break. Some of the plugs are labeled where they should go, but it would help to mark where they go just in case. Installed new panel in reverse order, easier than expected. Read more