Maytag Dishwasher Parts

The Seal is an OEM part for Whirlpool dishwashers. As a crucial door component, it ensures a tight fit that prevents leaks and contains the necessary heat and moisture during operation. 

Symptoms of a bad seal can include cracks, tears, or looseness allowing water to escape during cycles. Deterioration from chemical exposure or repeated flexing over time is common.

Causes of a bad seal include general wear and tear, damage from improper loading of dishes, or accidents like sharp objects puncturing the material.

Symptoms of a bad seal include: 

• Puddles or pools of water found beneath the dishwasher after cycles
• Wet floors and surfaces surrounding the dishwasher  
• Steam or moisture visible escaping during heating phases
• The door not closing or latching properly

This OEM Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This impeller is the rotating component inside the pump that moves water through the appliance. Replacing a worn or damaged impeller helps restore proper water flow for reliable circulation and draining performance. What it does:

• Drives water movement within the pump for circulation and/or draining
• Helps maintain consistent spray/flow for proper cleaning performance
• Failure can cause weak water flow, long cycles, or standing water
• May also present as unusual grinding/rumbling noises from the pump area

• 1 impeller

• Disconnect power and shut off water supply before servicing
• Access the pump; clear any debris before installation
• Note thread direction and orientation; many impellers use reverse threads
• Ensure the impeller spins freely after installation and run a test cycle to operation

The Track is an OEM part for Whirlpool dishwashers. It serves as the track or rail that allows the dishrack to glide smoothly in and out of the dishwasher during loading and unloading. The track is precision-engineered to provide smooth, controlled movement of the dishrack. It includes all necessary mounting brackets and attachments to facilitate simple installation.

Causes of a bad track can include scratches, dents or other damage due to impact or repeated use over time. The roller or wheel components may also become worn down or jammed, hindering proper movement.

Symptoms of a bad track include:

• The dishrack not rolling out fully or getting stuck partway
• Scratching or scraping noises when moving the dishrack
• Difficulty pushing the dishrack in and out
• The dishrack tilting or becoming unbalanced during movement

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dish Rack is an OEM part for Whirlpool dishwashers. It provides an organized space within the dishwasher tub to evenly support washed items. Engineered with a durable construction and flexible supports, the dish rack accommodates a variety of plates, bowls, and utensils. 

Symptoms of a bad dish rack include:

• Cracks or other damage compromising its rigid structure
• Supports that are loose, missing, or deformed prevent even the placement of dishes
• Intermittent rattling noises emanating from the rack during the wash cycle

Causes can be regular use taking its toll over time, unbalanced loading subjecting it to unnecessary strain, or an accidental impact. Replace it with this genuine Whirlpool OEM dish rack to restore structured stability and optimize cleaning coverage for all loaded items.

This replacement dish rack is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore-branded dishwashers. Maintaining factory components ensures consistent performance from your dishwasher.

This dishwasher circulation pump and motor assembly drives wash water through the spray arms at the proper pressure. Replacing a worn or noisy unit restores strong water movement and consistent cleaning during the wash and rinse cycles. What it does:

• Circulates water through the spray arms during wash and rinse cycles
• Maintains wash pressure and flow for effective cleaning performance
• Direct replacement for a seized, leaking, or excessively loud wash pump motor
• Typical symptoms: poor cleaning results, spray arms not turning, little/no water movement, grinding or humming during wash

• One circulation pump and motor assembly

• Disconnect power and shut off water supply before service; allow the dishwasher to cool
• Access is typically from the bottom; remove the toe panel and pull the unit forward as needed; place a towel to catch residual water
• Note wiring and hose orientations; release locking tabs/clamps to remove the old pump
• Ensure the new pump seats and locks fully into the sump; reconnect hoses/wiring and test for leaks and proper spray operation

The Lower Dishrack Roller Assembly is an OEM part for Whirlpool dishwashers. As an integral component, the lower dishrack roller assembly supports smooth movement and positioning of the lower dishrack. Its precision ball bearings allow for effortless extension and retraction of the lower rack.

Causes of a bad lower dishrack roller assembly can include wear and tear of bearings over time, stripped or damaged rails, or failure of rollers due to excessive loading.  

Symptoms of a bad lower dishrack roller assembly include:

• Difficulty extending or retracting the lower dishrack  
• Noisy or stuck operation of the lower rack
• Rack failing to remain securely in place during wash cycles
• Dishes shifting or falling during wash due to uneven support

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Kenmore, and some Maytag and GE dishwashers. 

The Power Cord is an OEM part for Whirlpool dishwashers. This kit provides you with all the necessary parts to safely and effectively connect your dishwasher to the power source. The kit includes one power cord with a right angle head, one grommet, and one metal strain relief. The power cord with a right angle head allows for easy installation and helps to prevent excessive bending or damage to the cord.  

A bad power cord can occur due to wear and tear, exposure to heat or moisture, or accidental damage. If you notice symptoms such as intermittent power supply, sparks or electrical arcing, or a loose connection, it may be time to replace the power cord kit.

Symptoms of a bad power cord include:

• Intermittent power supply
• Sparks or electrical arcing
• Loose connection

Restore your Whirlpool dishwasher by replacing the faulty or damaged power cord kit with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Power Cord is an OEM part for Whirlpool dishwashers. This kit provides you with all the necessary parts to safely and effectively connect your dishwasher to the power source. The kit includes one power cord with a right angle head, one grommet, and one metal strain relief. The power cord with a right angle head allows for easy installation and helps to prevent excessive bending or damage to the cord.  

A bad power cord can occur due to wear and tear, exposure to heat or moisture, or accidental damage. If you notice symptoms such as intermittent power supply, sparks or electrical arcing, or a loose connection, it may be time to replace the power cord kit.

Symptoms of a bad power cord include:

• Intermittent power supply
• Sparks or electrical arcing
• Loose connection

Restore your Whirlpool dishwasher by replacing the faulty or damaged power cord kit with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tub wheel mounts to the dishwasher's inner tub wall and guides the rack as it slides in and out. Replacing a worn wheel restores smooth rack movement and helps prevent binding, derailing, and scraping.

• Attaches to the tub to support and guide rack travel
• Helps keep the rack aligned on its tracks for smooth operation
• Typical failure symptoms: rack hard to slide, rack jumps off track or tilts, scraping/grinding noises, cracked or missing wheel
• Restores proper glide and reduces strain on rack components

• Disconnect power and water supply before servicing the appliance
• Remove the rack for access; release the old wheel's clip/fastener from the tub and install the new wheel
• Ensure the wheel spins freely and the rack moves smoothly end-to-end
• Inspect other wheels and related hardware and replace as needed for even wear

This left-hand tub mount is the bracket that secures the dishwasher's tub to the surrounding cabinet or countertop. It keeps the appliance stable and properly aligned so racks glide smoothly and the door seals consistently.

• Secures the tub to the cabinet/counter to prevent tipping or shifting
• Restores stability if the original left bracket is bent, cracked, or missing
• Helps maintain level alignment for smooth rack movement and proper door latching
• Common signs include the dishwasher rocking forward, loose installation, or visible bracket damage on the left side

• Disconnect electrical power and shut off the water supply before servicing
• Carefully slide the dishwasher forward and support it to prevent tipping
• Remove the damaged bracket and install the new one in the same orientation; tighten with existing hardware
• Re-level the appliance and secure it to the cabinet or countertop; verify smooth rack movement and proper door closure

This dishwasher rack tine row replaces a damaged or missing row so plates, lids, and shallow pans stand upright during the wash. Restores stable loading and spacing to help items stay put and get consistent spray coverage.

• Creates vertical dividers on the rack to hold dishes upright and separated
• Helps maintain spacing for effective spray coverage and drying
• Common symptoms of failure: bent or broken tines, row won't stay secured, or missing section
• When worn, dishes can tip over, reduce capacity, or cleaning performance may suffer

• Power off the dishwasher; wear gloves to avoid sharp edges
• Slide out and remove the affected rack for easier access
• Release locking tabs or clips to remove the old row; transfer any reusable end clips or retainers
• Snap the new tine row securely into place and reinstall the rack

The Tank is an OEM part for Whirlpool washing machines. It properly dispenses detergent during the wash cycle.

Causes of a bad detergent tank can include: cracks, holes or other damage that cause leakage or improper detergent dispensing. Scaling or mineral buildup inside the tank over time may also lead to detergent dispensing issues.

Symptoms of a bad detergent tank include:

• Detergent not being fully dispensed or released during the wash
• Residue or leftover detergent remaining in the tank after cycles
• Clothes not getting properly cleaned due to insufficient detergent release

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Mounting Clip is an OEM component specifically designed for Whirlpool brand dishwashers. This mounting clip acts to securely attach and hold the dishwasher in place under the kitchen counter. 

Symptoms of a bad mounting clip can include:

• Looseness, movement, or shaking of the dishwasher during operation
• Visible damage, bending, or broken tabs on the mounting clip itself
• Detachment or separation of the dishwasher from the cabinetry

Causes of a bad mounting clip usually stem from normal wear and tear over extended use. Repeated shocks or impacts could also damage the mounting clip over time.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models. 

This replacement silverware basket holds forks, knives and spoons securely during dishwasher cycles so utensils come out separated for better cleaning and easier unloading. Durable plastic construction designed for direct fit replacements. What it does:

• Keeps silverware organized and upright for improved water flow and cleaning
• Prevents small items from falling to the bottom of the tub or blocking spray arms
• Helps protect utensils from contact with larger dishes and racks
• Restores a missing, cracked or damaged utensil basket so loading is safer and neater

• One silverware basket

• Fits into the lower rack; simply drop into place and ensure it sits level
• Remove power or run an empty rinse cycle before working in the dishwasher for safety
• Inspect rack wheels and clips for damage before reinstalling; do not force into a warped rack
• Avoid overfilling to prevent bending or cracking