Maytag Range Parts

I REPLACED THE HINGE ASSY ONLY BECAUSE I WAS UNABLE TO PURCHASE THE SPRING ONLY. THIS IS 3rd TIME I REPLACED THE HINGES BECAUSE OF A BROKEN SPRING. IT WOULD BE CHEAPER IF ONLY THE SPRING COULD BE BOUGHT. Read more

• Gas igniter glows, but will not light

I ordered replacement parts to convert the side to individual burners. Read more

Everything works great, but my Jenn-Air stove is more than 15 years old and really needed a face lift. To replace it will cost about $3000.00 to replace, to replace missing and old parts around $500.00. Thankfully Appliance Parts Pros had all the parts I needed to make my stove look as good as it works. Read more

Found that the gas line did not have a dirt trap put in it. So I put one in. I think the regulator valve was not closing off. To be safe, I replaced the gas safety valve and regulator. Read more

Took down model# and tried to match on website. However there were 5 sub-models. Had to look very carefully at the pictures of the parts. Also, there were 3 different size caps on the range. Ordered one small, 2 medium, and one large. Arrived in 48 hours. Perfect match. Placed on burners. Repair complete. Read more

Primarily, removed oven door. Be cognizant of how you disassembled ... Very important when you reassemble ! By-the-way,this was ALL PRECIPITATED by wanting to clean the interior side of oven door glass after my wife self-cleaned the oven! How in-the-world did grease get there in the first place!? While disassembling door, after removing from body of oven , the right side trim piece (being Very brittle) Broke ! Than, due to the same reason, the left side trim piece Broke ! Yippee ! That will... Read more

Replaced the inside glass. Read more

I ordered a new grease filter. There was no fixing it. Read more

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

Order the correct harness from AppliancePartsPro.com and watch the video which was very helpful. Simple repair took only about 30 minutes. definitely saved myself a service call. Read more

Open oven door removed 2 screws to lift up top then remove 1 screw at back of burner assy to let right side burner assy drop down to replace then remove wires be sure to write down where wires go look on bottom side for location of wire plugs new burner plugs may be located in different location mine was then install new burner assy Read more

• Element will not heat

Not really a repair, just needed to update some parts that were worn out. Drip pans were perfect and I am so glad to have found them on this location. Read more

Very easy plug and play. My only issue was diagnosis of the problem "my problem". Based on reading on the internet I ordered to control board first. waste of money. But Appliance Parts Pro site was great. I was able to find the part I wanted and easy ordering and fast delivery. 2-3 days on both parts. Read more