Maytag Range Parts

Tested the High Voltage Capacitor which showing no capacitance and no resistance. Replaced it together with the diode and the line fuse no longer blew and the microwave is back in service. Read more

Replaced the Infinite Switch and that solved the problem. Did not need to replace the Surface Element Read more

Start by removing the frame on the sides and bottom of the door. (Do not unscrew the corner screw holding the side frame and bottom together.) Be careful the glass will fall once the last screw is removed from the bottom so hold tight. Carefully remove glass and set aside. Remove top frame that held the handle. Once all the frame work and outer glass is removed unscrew the bracket that held the door handle from the door. Taking the top frame and bracket insert screw and washer and screw the... Read more

Bought replacement burner receptacles. Cut off the old ones, used wire nuts to connect replacements. Read more

Check the power cord connection to the stove and found burned cable due to loose connection. Replaced the terminal and the nuts and installed a new power cord. Read more

Between YouTube, a multimeter and Appliance Parts Pro I was able to diagnose the problem and fix the oven without an expensive service call. Read more

I had to take out the bottom drawer that holds pans. Disconnect the power and pull the oven out. Removed door, rear panel that held the screws for the side panel and lift up and out the side panel. After that it was straight forward as to replacing the hinge. Spent more time cleaning the florr where the oven was than installing the hinge. Read more

Very easy plug and play. My only issue was diagnosis of the problem "my problem". Based on reading on the internet I ordered to control board first. waste of money. But Appliance Parts Pro site was great. I was able to find the part I wanted and easy ordering and fast delivery. 2-3 days on both parts. Read more

One of the heating elements of the stove was burnt. After removal of two screws under the ceramic glass, I replaced the 2500 w heating element (8 inch size). Read more

I searched the web for Appliance parts and found a place that had parts for my stove. I was hoping to have the part by a certain date stated 8/11 but didn't get it till 8/13 Read more

Flip the burner facing down. Take out the seven screws that hold together the housing and the slip off the housing. Disconnect the igniter leads. Turn the burner clock wise from the opposite side your likely working. You'll get a better purchase there. Take the screws out of the old igniter, as they don't come in with the new igniter. Install the new igniter on to the new burner. Make sure that the igniter is poking all the way out of the whole in the burner. I found that the screws did... Read more

Called up AppliancePartsPros and ordered the part. My husband took the oven door apart and had it replaced within 15 minutes. Read more

Looked at YouTube on how to replace burner. Marked wires on each fitting with different color marker and took Ipad photo of underside while my wife held range top up. We had shut off range double breaker in basement. I took part to a local appliance parts house nd they ordered prt which they did not have in stock. Estimate 3days. I called on 3rd day, back ordered, maybe ship,on the 7th day. Called 7th day, maybe two more weeks. Got online, on Fri. Afternoon, you had part, shipped it that... Read more

We found a video on how to change out the glass and looked fairly easy. My husband, being the skeptic that he is, wasn't on board as readily as I was but we tried it regardless. To his surprise in about 30 minutes we did it! So easy and a big thanks to Appliances Parts Pros for the part. We had the new part in 1 1/2 days...I was expecting it to be delivered in 5 days! This is not the first time doing business with them and I will continue to do so. Great company!! Read more

Your part was a perfect replacement. Fixed in 30 minutes. Read more